Plastic
scrapers: PUR plastic, gray
stiffening core: Galvanized steel
cap screws: DIN 912 Galvanized steel, blue passivated (screws are included)
( with the size h1 = 18, the scraper is fixed only with a central screw.)
Aluminum
versions:
- blank, vibration, separation seam invisible
or
- plastic coated
black, RAL 9005, textured finish or .
silver, RAL 9006, textured finish
Die-cast aluminium, plastic-coated, black, RAL 9005, textured matt
Pressure screws: stainless steel
The GN298 housings for angle/T gears are used in conjunction with bevel gears GN297 and linear/transmission units.
aluminum, plastic-coated, black, RAL 9005, textured finish
Clamping bores unprocessed
Fastening / transmission elements
screw DIN 912
hex nuts DIN 985
Locating Pins, drivers stainless steel, stainless steel 1.4301
Aluminum: black anodized
Cover: plastic, light gray
Collet / hexagon nut: brass
Stainless steel threaded pin DIN 916 with hexagon socket and cup point
Turnable cylinder knobs GN599.5: Plastic, thermoplastic, black, matt
Axle part: Stainless steel, 1.4305
arresting GN200 and simplify complex partial and indexing devices, such as shift lever, latches, index pins and other safety elements
Material:
- Steel
or
- stainless steel (NI), Material No. 1.4305
versions:
Type A: knob without scale (with steel variant: burnished)
Type AS: knob scale engraved with laser precision, reference line on locking (for steel version: satin chrome and black deposed)
form B: lever with one lever, bürniert (only in steel version available)
form C: Rocker with two adjustment levers, burnished (available only in steel design)
keyway P9 DIN 6885:
sheet 1 for bore K10
sheet 2 for drilling> K10
Fixed cylindrical handles GN539 (plastic, thermoplastic black , shiny) (only form B and C)
plastic
Duroplast (PF)
temperature resistant up to 110 ° C
black, shiny
Thermoplastic (polyamide)
glass fiber reinforced
thermally stable up to 60 ° C
black, matt
Cap screws DIN 912:
Stainless steel 1.4301
Hexagon nuts ISO 4032:
Stainless steel 1.4301
Stainless Steel (NI)
- thickness 0.6 mm
- scale etched
plastic (KUS)
- Strength 0 , 3mm
- silver deposited
- printed scale
Plastic, polyamide, black, temperature-resistant up to 90 °C
Versions:
- A - without stopper
- B - with stopper
Suitable for roller tracks GN646.1
Plastic, Duroplast (PF)
temperature resistant up to 110 ° C
black, shiny
axle: stainless steel, Material No. 1.4305, dull blasted
Plastic
thermosetting plastic (PF)
temperature resistant up to 110 ° C
Black, shiny
axle: galvanized steel, blue passivated
Thermoplastic (Polyamide PA): thermally stable up to 90 ° C
black, matt
Stainless Steel (NI)
Material No. 1.4305 finely turned, download blank
axle
stainless
Material No. 1.4305
,
Thermoplastic (Polyamide PA): thermally stable up to 90 ° C
black, matt
Aluminum (AL)
polished
axle
steel zinc plated, blue passivated
plastic, thermoplastic (polyamide PA)
temperature 80 ° C
black, matt
axle: galvanized steel
aluminum and anodized black
Lid: plastic, light gray
Collet / hexagon nut: Brass
Stainless steel screw DIN 916 with internal hexagon and serrated point
aluminum, anodized black
scale ring: plastic, black, pressed
arrow (Type A) and scale (Type S; 0th ..9, 20 subdivisions), white, engraved with laser precision
lid: plastic, light gray
collet / hexagon nut: brass
stainless steel screw DIN 916 with internal hexagon and serrated point
plastic, thermoplastic (Polyamide PA)
glass fiber reinforced
temperature resistant up to 130 ° C
black, shiny
arrow (Type M) and scale (0 ... 9, 20 subdivisions; form S),
white, engraved with laser precision
Grub screw DIN 916 with internal hexagon and serrated point
Plastic (KT)
Thermoplastic (Polyamide PA): thermally stable up to 90 ° C
black, matt
rotatable
Retractable mechanism Stainless
axle
Material No. 1.4305
Attachment
Sintered steel
SteelNI 1.4404
Leverage:
Stainless steel (investment casting), stainless 1.4308
axis tension nut
adjusting nut and screw (only type A)
stainless steel, stainless 1.4305
Contact plate:
Type A:
plastic (polyacetal POM), glass fiber reinforced
form B:
plastic (polyamide PA) glass fiber reinforced,
stainless steel
- Eccentrical: Material No. 1.4305, Electroless nickel
- Bolt and washer: stainless, 1.4542, tempered
- Ball control: non-corrosive, 1.4305, dull blasted
ball knob DIN 319
plastic
thermoset
black, shiny
In connection with clamping bars recommended the use of ball screws GN 605 with flattened ball.
stainless steel
- Eccentrical: Material No. 1.4305, Electroless nickel
- Bolt and washer: stainless, 1.4542, tempered
- Ball control: non-corrosive, 1.4305, dull blasted
ball knob DIN 319
plastic
thermoset
black, shiny
In connection with clamping bars recommended the use of ball screws GN 605 with flattened ball.
stainless steel
- Eccentrical: Material No. 1.4305, Electroless nickel
- Bolt and washer: stainless, 1.4542, tempered
- Ball control: non-corrosive, 1.4305, dull blasted
ball knob DIN 319
plastic
thermoset
black, shiny
Rail profile and balls: stainless steel, rustproof, 1.4301
Ball cage, outer rail: plastic
Ball cage, inner rail: stainless steel, rustproof, 1.4301
Rubber stop and separating function: plastic / Elastomer
Lubricant: Roller bearing grease, FDA-compliant
Operating temperature -20 °C to 100 °C
Plastic
thermoplastic (polyamide PA)
glass fiber reinforced
temperature resistant up to 130 ° C
black, matt
female brass
Plastic: duroplastic (PF), reinforced, temperature-resistant up to 110 °C, black, glossy
Flashing: polished
Hub bush: steel, burnished
Reversible handles: Plastic, Duroplast, black, glossy, rotatable
Reversible mechanism: Steel, burnished
Plastic Technopolymer (Polyamide PA)
- glass reinforced
- temperature resistant up to 100 ° C
- black, matt
Bush : steel, burnished
Grub screw DIN 916 with internal hexagon and serrated point
Plastic Technopolymer (Polyamide PA)
- glass reinforced
- temperature resistant up to 100 ° C
- black, matt
Bush and anchor pin: steel, blackened
screw anchor pin injected
threaded pin DIN 916 with a hexagon socket and serrated
plastic, thermoplastic (Polyamide PA)
black, matt
platelets
Aluminum anodized, natural color
screw DIN 916 with internal hexagon and serrated point
Plastic
thermoplastic (polyamide PA)
glass fiber reinforced
temperature resistant up to 100 ° C
Black, shiny
female: steel, blackened
Set screw DIN 916 with internal hexagon and serrated point
Features:
knob plastic (Polyamide PA) glass fiber reinforced, matt
Window Plastic (Polyamide PA-T): transparent, durable, plastic, red
scale::;: impact resistant
knob and lens (not suitable for alcohol) oil- and solvent-resistant
pointer - - C
temperature resistant ° to 100 aluminum, matt anodized
graduations black
counter:
- figures in white
_ number wheels integers in black, red for decimals
bush: steel, burnished
protection IP 67
Knob Plastic Technopolymer (Polyamide PA) glass fiber reinforced, matt
Sight glass plastic (Polyamide PA-T): transparent, durable, impact resistant
knob and window:
- temperature-resistant up to 100 ° C
- oil- and solvent-resistant (but not resistant to alcohol)
pointer: plastic
- long pointer: red
- short pointer: black
Dial: aluminum, matt anodised
graduations and figures black
bush: steel, burnished
IP 67 protection
Body:
plastic, thermoplastic (polypropylene PP)
sheathed with a soft elastomer (TPE)
70 Shore A
temperature 80 ° C
black gray, matte RAL 7021
Softline lagging:
chemically bonded to the plastic core
female
steel, blackened
Color cap:
black gray, RAL 7021, matt
orange, RAL 2004, matt
gray, RAL 7035, matt
yellow, RAL 1021, matt
blue, RAL 5024, matt
red, RAL 3000, matt
Plastic
thermoplastic (polyamide PA)
glass fiber reinforced
temperature resistant up to 130 ° C
Black, shiny
female: steel, blackened
lid: plastic, light gray
Plastic, thermoplastic (polyamide PA)
- glass fiber reinforced
- temperature resistant up to 100 °C
- black, matt
bushing and anchor pin: Steel, burnished
Screw for anchor pin injected
Threaded pin DIN 916 with hexagon socket and cup point
Plastic, thermoplastic (polyamide PA)
- glass fiber reinforced
- temperature resistant up to 100 °C
- black, matt
bushing: steel, burnished or stainless steel, rustproof, 1.4305
Threaded pin: DIN 916 with hexagon socket and cup point, steel or stainless steel, rustproof, 1.4301
Plastic, thermoplastic (polyamide PA), glass fiber reinforced, temperature-resistant up to 100 °C, black, matt
Hub bush: steel, burnished
Cover: plastic, black , matt
folding handle: rotatable, plastic, thermoplastic, black, matt
folding mechanism: steel, burnished
Plastic, thermoplastic (polyamide PA)
- glass fiber reinforced
- temperature resistant up to 120 °C
- black, shiny
hub: steel, burnished
plastic
Duroplast (PF)
temperature resistant up to 110 ° C
black, shiny
Plastic
thermosetting plastic (PF)
temperature resistant up to 110 ° C
Black, shiny
polyamide socket pressed
Plastic - Transparent polyamide (PA-T)
- aging
- high mechanical strength
- temperature-resistant up to 100 ° C
- solvent resistant, not suitable for alcohol
seal: rubber NBR (Perbunan®)
reflector (only form A): aluminum, natural anodised
plastic
Duroplast (PF)
temperature resistant up to 110 ° C
black, shiny
Plastic
thermoplastic (polypropylene PP)
sheathed with a soft elastomer (TPE)
70 Shore A
temperature 80 ° C
black matt
Softline lagging and plastic core chemically bonded
axle: steel, zinc plated, blue passivated
plastic, thermoplastic (polyamide PA)
glass fiber reinforced
temperature resistant up to 130 ° C
black gray, RAL 7021, matt
red, RAL 3000, matt
yellow, RAL 1021, matt
blue, RAL 5024, matt
gray, RAL 7035, matt
threaded pin: steel, zinc plated, blue passivated
threaded bushing: brass
Thermoplastic (Polyamide PA):
strengthened temperature resistant up to 130 ° C
black, matt
jack
brass
Plastic, thermoplastic (polyamide PA), glass fiber reinforced, temperature-resistant up to 110 °C, black, shiny
Hub bush: steel, burnished
Shaft: steel, matt chrome-plated
Cylinder knobs GN519: plastic, duroplast black, glossy
Plastic
thermosetting plastic (PF)
temperature resistant up to 110 ° C
Black, shiny
polyamide bush pressed
plastic
Duroplast (PF)
temperature resistant up to 110 ° C
black, shiny
plastic; Thermoplastic (polyamide PA)
Threaded
temperature 80 ° C
embodiment for whipping:
temperature resistant up to 50 ° C
Color:
black, RAL 9005, gloss
orange, RAL 2004, gloss
gray, RAL 7040, gloss
yellow, RAL 1021, gloss
blue, RAL 5024, gloss
red, RAL 3000, glossy
white, RAL 9002, glossy
Wheel body Plastic, thermoplastic (polyamide PA), reinforced, impact-resistant, temperature-resistant up to 100 °C, black, matt
Hub bush: steel, burnished
MS- Threaded socket for screwing in the cylindrical handle
Rotating cylindrical handles: plastic, thermoplastic black, matt
Threaded pin DIN 916 with hexagon socket and cup point
Plastic, thermoplastic (polypropylene PP): reinforced, impact-resistant, temperature-resistant up to 80 °C, black, matt
Hub bush: stainless steel, rustproof, 1.4301
Cover : plastic, light gray
folding handle: plastic, thermoplastic (polyamide PA), black, matt, folding mechanism / axle part, stainless steel, 1.4305
Plastic thermoplastic (polypropylene PP), reinforced, impact-resistant, temperature-resistant up to 80 °C, black, matt
Hub bush: steel, burnished
Cover: <
> - Plastic, black with d1 = 80
- Plastic, light gray with d1 > 80
Reversible handle: Plastic, thermoplastic (polyamide PA) black, matt, rotatable
Reversible mechanism / axle part: Steel, burnished
Plastic, thermoplastic (polypropylene PP): reinforced, impact-resistant, temperature-resistant up to 80 °C, black, matt
Hub bush: Stainless steel, rustproof, 1.4301
Threaded bush : Brass
Lid: Plastic, light gray
Rotating cylindrical handle: Plastic, thermoplastic (polyamide PA), black, matt, axle part, stainless steel, 1.4301 (only version R)
Disc handwheels GN 521.5 are on the back provided with recessed grips.
plastic, thermoplastic (polypropylene PP)
sheathed with a soft elastomer (TPE)
70 Shore A
temperature 80 ° C
black gray, matte , similar to RAL 7021
Softline lagging
chemically bonded to the plastic core
female brass
Possible colors of the cap:
transparent (DTR)
orange (DOR), RAL 2004, matt
gray (DGR), RAL 7035, matt
yellow (DGB), RAL 1021, matt
blue (DBL), RAL 5024, matt
red ( DRT), RAL 3000, matt
plastic, thermoplastic (polypropylene PP)
sheathed with a soft elastomer (TPE)
70 Shore A
temperature 80 ° C
black, matt
Softline lagging with the plastic is chemically bonded
transparent cap (Type T) with magnifying effect
Plastic, thermoplastic (PP), FDA certified, reinforced, impact-resistant, temperature-resistant up to 80 °C, black, matt
Reversible handles: plastic, thermoplastic (PA) , FDA certified, black, matt, rotatable
folding mechanism, hub bushing and cover: stainless steel, rustproof 1.4301hub cover: self-adhesive
Plastic, thermoplastic (polypropylene PP), reinforced, impact-resistant, temperature-resistant up to 80 °C, black, matt
Hub bush: steel, burnished
Reversible handles: plastic , thermoplastic (polyamide PA) black, matt, rotatable
folding mechanism: steel, burnished
Housing Plastic Technopolymer (Polyamide PA) glass fiber reinforced, matt
Sight glass plastic (Polyamide PA): transparent, durable, impact resistant
housing / window:
- temperature-resistant up to 100 ° C
- oil- and solvent-resistant (but not resistant to alcohol)
pointer: plastic, Langer hand: red
Short pointer: black scale: aluminum, anodized matt
graduations and figures black
pendulum system on ball bearings
IP 67 protection
Housing Plastic Technopolymer (Polyamide PA) glass fiber reinforced, matt
Sight glass plastic (Polyamide PA): transparent, durable, impact resistant
housing / window:
- temperature-resistant up to 100 ° C
- oil- and solvent-resistant (but not resistant to alcohol)
pointer: plastic, Langer hand: red
Short pointer: black scale: aluminum, anodized matt
graduations and figures black
protection IP 65
Housing plastic (Polyamide PA) glass fiber reinforced, matt
Window Plastic (Polyamide PA): transparent, durable, impact resistant
housing / window:
- temperature-resistant up to 100 ° C
- oil- and solvent-resistant (but not resistant to alcohol)
pointer: plastic, scale: aluminum, anodized matt
ticks: black
counter:
- figures in white
- number wheels integers in black, red for decimals
protection IP 65
Housing: Plastic Technopolymer (Polyamide PA)
- orange, RAL 2004 or
- gray, RAL 7035
- temperature 80 ° C
- Oil and solvent resistant
digits know
number wheels for integers in black red
decimal places; provided with additional scale
hollow shaft: steel, burnished
Grub screw DIN 916 with internal hexagon and serrated point
Housing: plastic (Polyamide PA)
- orange, RAL 2004 or
- gray, RAL 7035
- temperature resistant up to 50 ° C
- Oil and solvent resistant
LCD display: 5 digits and special characters
hollow shaft: stainless steel, 1.4301
seal: O-ring, rubber Perbunan® (NBR) (only for code 2 - IP 67)
Housing: plastic (Polyamide PA)
- orange, RAL 2004 or
- gray, RAL 7035
- temperature 80 ° C
- Oil and solvent resistant
digits know
dials black for integers
decimals red; provided with additional scale
hollow shaft: steel, burnished
Grub screw DIN 916 with internal hexagon and serrated point
Housing: plastic (Polyamide PA)
- orange, RAL 2004 or
- gray, RAL 7035
- temperature resistant up to 50 ° C
- Oil and solvent resistant
LCD display: 6 digits and special characters
hollow shaft: stainless steel, 1.4301
seal: O-ring, rubber Perbunan® (NBR) (only for code 2 - IP 67)
Housing: Plastic Technopolymer (Polyamide PA)
- orange, RAL 2004 or
- gray, RAL 7035
- temperature 80 ° C
- Oil and solvent resistant
digits know
number wheels for integers in black red
decimal places; provided with additional scale
hollow shaft: steel, burnished
Grub screw DIN 916 with internal hexagon and serrated point
Housing plastic (Polyamide PA) glass fiber reinforced, matt
Window Plastic (Polyamide PA): transparent, durable, impact resistant
housing / window:
- temperature-resistant up to 100 ° C
- oil- and solvent-resistant (but not resistant to alcohol)
pointer: plastic, red
scale: aluminum, anodized matt
ticks: black
counter:
digits know
number wheels integers in black
decimals red
pendulum system on ball bearings
IP 67 protection
plastic, thermoplastic (polyamide PA)
glass fiber reinforced
temperature resistant up to 130 ° C
black, matt
Screw:
Steel , galvanized; blue passivated
Plastic, thermoplastic (PP), reinforced, impact-resistant, temperature-resistant up to 90 °C, black, matt
Hub bush: brass
Threaded pin: DIN 916 with hexagon socket and cup point
Rotatable cylinder knobs GN595: plastic, thermoplastic (PA) black, matt
axle part: steel, zinc-plated, blue passivated
plastic, thermoplastic (polypropylene PP)
impact resistant
temperature 80 ° C
black, matt
plastic
Duroplast (PF)
temperature resistant up to 110 ° C
black, shiny
Plastic, polyamide, black, temperature-resistant up to 90 °C
Pan head tapping screws: stainless steel
Versions:
- C - connector
- E - Completion
Leverage:
Zinc Die Cast
plastic coated
abrasion resistant epoxy
Color:
black, RAL orange 9005
RAL 2004
red, RAL 3000
silver, RAL 9006
axis tension nut
adjusting nut and screw (only type A)
steel, zinc plated, blue passivated
Contact plate
form A
thermoplastic (polyacetal POM), glass fiber reinforced
form B
thermoplastic (polyamide PA) glass fiber reinforced,
Leverage:
steel, zinc plated, blue passivated
axis tension nut
adjusting nut and screw (only type A)
steel, zinc plated, blue passivated
Contact plate:
Type A
thermoplastic (polyacetal POM), glass fiber reinforced
form B
thermoplastic (polyamide PA) glass fiber reinforced
Thermoplastic (polyamide)
glass fiber reinforced
thermally stable up to 60 ° C
black, matt
Cap screws DIN 912:
Stainless steel 1.4301
Hexagon nuts ISO 4032:
Stainless steel 1.4301
Zinc die casting, plastic coated
black, textured finish
Adjustable hand levers GN302-30:
black, RAL 9005, textured finish
Zinc die casting, plastic coated
black, textured finish
Adjustable hand levers GN302-30:
black, RAL 9005, textured finish
Plastic
thermoplastic (polyamide PA)
temperature-resistant up to 90 ° C
Black, shiny
transparent visor with magnifying effect
Circuit symbols of self-adhesive film silver gray
pressure / black
plastic
Duroplast (PF)
temperature resistant up to 110 ° C
black, shiny
Steel, turned, burnished
Ball Knobs:
DIN 319
plastic, black
Variant SBL:
Housing: sheet steel, zinc plated, blue passivated
Ball: steel, bare
variant SKU:
housing: sheet steel, zinc plated, blue passivated
ball: plastic (polyacetal POM)
variant SNI:
housing: sheet steel, zinc plated, blue passivated
ball: stainless steel, stainless, 1.4034
variant NNI:
housing: stainless steel sheet 1.4301
ball: stainless steel, stainless, 1.4034
Leverage:
plastic (Polyamide PA)
glass fiber reinforced
temperature resistant up to 80 ° C
black, matt
connector:
plastic (polyacetal POM)
with screw or threaded bushing
galvanized steel
Contact plate / collar:
plastic (polyamide PA-HP)
black, matt
axis:
steel, zinc plated, blue passivated
dimensions:
Leverage:
plastic (Polyamide PA)
glass fiber reinforced
temperature resistant up to 80 ° C
black, matt
Connector:
plastic (polyacetal POM)
threaded socket or screw
stainless steel
Contact plate / collar:
plastic (polyamide PA-HP)
black, matt
axis:
stainless steel
Plastic (KT), thermoplastic (polyamide PA), impact-resistant, black, matt
Hub bush: Steel, burnished
black-gray, matt, download Head screw to DIN 912:
Stainless Steel, 1.4404
Hexagon nut to DIN 934:
Stainless Steel, 1.4404
outer ring: plastic (polyacetal POM)
Operating Temperature: 0 ° ... 40 ° C
inner race / balls: steel, bare
threaded pin (code 2): galvanized steel
O-ring rubber NBR (Nitrile), 70 Shore A (only in shape: circular)
Body:
- "ALS": aluminum, anodized black
viewing area: Glass
- Version "KT": plastic, white
viewing area: transparent
filling:
- colorless transparent (K)
- transparent green (G) (only in version KT)
sensitivity (Sens):
- 10 arc minutes per 2mm Blasenweg (version ALS)
- 40 arcmin per 2mm Blasenweg (version KT)
The level stakes are not aligned, d. H. an adjustment to the vertical position must by aligning the receiving component be guaranteed.
When running ALS reflection results from the black housing on the bubble edge, which improves the readability significantly.
The execution KT with contrast ring available within the vial housing (code 2), which ensures the same effect.
Alternatively, a corresponding improvement in contrast are also achieved by a dark wall of the mounting hole.
Stainless Steel (NI):
- thickness 0.6 mm
- scale etched
plastic (KUS):
- thickness 0.3 mm
- silver deposited
- scale printed
forms:
- S - digits arranged perpendicularly
digit sequences:
U - zero point below
M - zero centrally
O - zero point above
- W - figures arranged horizontally
digit sequences:
L - zero left
M - zero centrally
R - zero right
Plastic, polyamide, black, temperature-resistant up to 90 °C
Versions:
- B - block
- W - angle
plastic, thermosetting plastic (PF)
temperature resistant up to 110 ° C
Black, shiny
Form D:
female, brass
form e:
threaded stud, steel, zinc plated, blue passivated
thermoplastic (Polyamide PA)
black, shiny
terminal
stainless steel
Material No. 1.4305
or galvanized steel
Steel, blackened
Cover:
plastic
black, with inlaid natural colored anodized aluminum strip
keyway for drilling:
K10: 3 P9 x 1.1
K12 ... K16: DIN 6885 Part 2
ball knobs DIN 319:
plastic, thermoset
black, shiny
Housing: Steel, plastic-coated, black, textured matt
Shaft: Stainless steel, rustproof, 1.4305, matt blasted
Wearing parts: Steel, hardened
Switch knob: GN719.1, Plastic, Duroplast, Black, Glossy
Body:
- aluminum (Form N)
- steel (Form R / Type S), plated and blue passivated
wheels:
- bearing steel, hardened ball bearing, sealed (2 RS), lifetime lubrication
wiper:
plastic, PUR, gray
steel core, galvanized
Fits running rail GN2422
Die-cast aluminium:
- Hub machined
- Wheel rim turned on all sides
- Wheel body completely plastic-coated
- Black, textured matt
Concentricity - and run-out deviation of the wheel rim under IT 12
Gear wheel: plastic (polyamide PA), glass fiber reinforced
Screw for anchor pin: steel, blued, injected
Rotatable cylinder handles GN 798 (plastic, thermoplastic, black, matt)
Aluminum
- Hub machined
- Wheel rim turned on all sides
Run-out and axial run-out deviation of the wheel rim < 0,4
Wheel body completely plastic-coated, black, textured matt <
> Rotating cylindrical handles GN 798 (plastic, thermoplastic, black, matt)
Disc handwheels GN323 have recessed grips on the back
Plastic, polyamide, black, temperature-resistant up to 90 °C