Plastic
Carriage / end plates, extruded aluminium, anodised, natural color
Guide shafts: stainless steel
Drive:
- Spindle / ball bearing, stainless steel, rustproof
- Spindle nut: plastic
Fastening screws: stainless steel, rustproof
Turning knob / scale ring: aluminum, black anodized
Wheel body: Aluminum
- Wheel rim turned on all sides and highly polished
Coupling elements: Steel, nitrated
- Running surfaces ground or PTFE-coated
- Bearing flange burnished, fixed
Rotatable cylinder handles GN598: Plastic, Duroplast, black, glossy
Axle part: Steel, zinc-plated, blue passivated
Housing: plastic (Polyamide PA)
- orange, RAL 2004 or
- gray, RAL 7035
- temperature resistant up to 50 ° C
- Oil and solvent resistant
LCD display: 6 digits and special characters
hollow shaft: stainless steel, 1.4301
seal: O-ring, rubber Perbunan® (NBR) (only for code 2 - IP 67)
Housing: plastic (Polyamide PA)
- orange, RAL 2004 or
- gray, RAL 7035
- temperature resistant up to 50 ° C
- Oil and solvent resistant
LCD display: 5 digits and special characters
hollow shaft: stainless steel, 1.4301
seal: O-ring, rubber Perbunan® (NBR) (only for code 2 - IP 67)
Housing plastic (Polyamide PA) glass fiber reinforced, matt
Window Plastic (Polyamide PA): transparent, durable, impact resistant
housing / window:
- temperature-resistant up to 100 ° C
- oil- and solvent-resistant (but not resistant to alcohol)
pointer: plastic, scale: aluminum, anodized matt
ticks: black
counter:
- figures in white
- number wheels integers in black, red for decimals
protection IP 65
Features:
knob plastic (Polyamide PA) glass fiber reinforced, matt
Window Plastic (Polyamide PA-T): transparent, durable, plastic, red
scale::;: impact resistant
knob and lens (not suitable for alcohol) oil- and solvent-resistant
pointer - - C
temperature resistant ° to 100 aluminum, matt anodized
graduations black
counter:
- figures in white
_ number wheels integers in black, red for decimals
bush: steel, burnished
protection IP 67
Housing plastic (Polyamide PA) glass fiber reinforced, matt
Window Plastic (Polyamide PA): transparent, durable, impact resistant
housing / window:
- temperature-resistant up to 100 ° C
- oil- and solvent-resistant (but not resistant to alcohol)
pointer: plastic, red
scale: aluminum, anodized matt
ticks: black
counter:
digits know
number wheels integers in black
decimals red
pendulum system on ball bearings
IP 67 protection
Wheel body made of aluminium:
- Wheel rim turned on all sides and highly polished
- Unprocessed surfaces plastic-coated, black, textured matt
Coupling elements: Steel, hardened, treads ground
Cover cap: Plastic, light gray
Rotatable cylindrical handles GN598: Steel, plastic-coated, black, textured matt
Shaft part steel: zinc-plated, blue passivated
With needle bearing
Body:
- aluminum (Form N)
- steel (Form R / Type S), plated and blue passivated
wheels:
- bearing steel, hardened ball bearing, sealed (2 RS), lifetime lubrication
wiper:
plastic, PUR, gray
steel core, galvanized
Fits running rail GN2422
Rail profile: Steel, zinc-plated, blue passivated
Balls: Roller bearing steel, hardened
Ball cage: Plastic
Locks: Die-cast zinc / plastic
Rubber stop: plastic / elastomer
Operating temperature -20 °C to 100 °CVersions: - B - with rubber stop - M - with rubber stop, rear locking - K - with rubber stop, front locking - Q - with rubber stop, rear-front locking via Through Holes
Steel, blackened
Cover:
plastic
black, with inlaid natural colored anodized aluminum strip
keyway for drilling:
K10: 3 P9 x 1.1
K12 ... K16: DIN 6885 Part 2
ball knobs DIN 319:
plastic, thermoset
black, shiny
aluminum, plastic-coated, black, RAL 9005, textured finish
Clamping bores unprocessed
Fastening / transmission elements:
screw DIN 912
hex nuts DIN 985
Locating Pins, driver
stainless steel, stainless steel 1.4301
Housing Plastic Technopolymer (Polyamide PA) glass fiber reinforced, matt
Sight glass plastic (Polyamide PA): transparent, durable, impact resistant
housing / window:
- temperature-resistant up to 100 ° C
- oil- and solvent-resistant (but not resistant to alcohol)
pointer: plastic, Langer hand: red
Short pointer: black scale: aluminum, anodized matt
graduations and figures black
protection IP 65
Knob Plastic Technopolymer (Polyamide PA) glass fiber reinforced, matt
Sight glass plastic (Polyamide PA-T): transparent, durable, impact resistant
knob and window:
- temperature-resistant up to 100 ° C
- oil- and solvent-resistant (but not resistant to alcohol)
pointer: plastic
- long pointer: red
- short pointer: black
Dial: aluminum, matt anodised
graduations and figures black
bush: steel, burnished
IP 67 protection
stainless steel
- Eccentrical: Material No. 1.4305, Electroless nickel
- Bolt and washer: stainless, 1.4542, tempered
- Ball control: non-corrosive, 1.4305, dull blasted
ball knob DIN 319
plastic
thermoset
black, shiny
In connection with clamping bars recommended the use of ball screws GN 605 with flattened ball.
stainless steel
- Eccentrical: Material No. 1.4305, Electroless nickel
- Bolt and washer: stainless, 1.4542, tempered
- Ball control: non-corrosive, 1.4305, dull blasted
ball knob DIN 319
plastic
thermoset
black, shiny
In connection with clamping bars recommended the use of ball screws GN 605 with flattened ball.
Housing: Plastic Technopolymer (Polyamide PA)
- orange, RAL 2004 or
- gray, RAL 7035
- temperature 80 ° C
- Oil and solvent resistant
digits know
number wheels for integers in black red
decimal places; provided with additional scale
hollow shaft: steel, burnished
Grub screw DIN 916 with internal hexagon and serrated point
stainless steel
- Eccentrical: Material No. 1.4305, Electroless nickel
- Bolt and washer: stainless, 1.4542, tempered
- Ball control: non-corrosive, 1.4305, dull blasted
ball knob DIN 319
plastic
thermoset
black, shiny
Housing: Plastic Technopolymer (Polyamide PA)
- orange, RAL 2004 or
- gray, RAL 7035
- temperature 80 ° C
- Oil and solvent resistant
digits know
number wheels for integers in black red
decimal places; provided with additional scale
hollow shaft: steel, burnished
Grub screw DIN 916 with internal hexagon and serrated point
Housing: Steel, plastic-coated, black, textured matt
Shaft: Stainless steel, rustproof, 1.4305, matt blasted
Wearing parts: Steel, hardened
Switch knob: GN719.1, Plastic, Duroplast, Black, Glossy
Housing: plastic (Polyamide PA)
- orange, RAL 2004 or
- gray, RAL 7035
- temperature 80 ° C
- Oil and solvent resistant
digits know
dials black for integers
decimals red; provided with additional scale
hollow shaft: steel, burnished
Grub screw DIN 916 with internal hexagon and serrated point
Rail profile and balls: stainless steel, rustproof, 1.4301
Ball cage, outer rail: plastic
Ball cage, inner rail: stainless steel, rustproof, 1.4301
Rubber stop and separating function: plastic / Elastomer
Lubricant: Roller bearing grease, FDA-compliant
Operating temperature -20 °C to 100 °C
Housing Plastic Technopolymer (Polyamide PA) glass fiber reinforced, matt
Sight glass plastic (Polyamide PA): transparent, durable, impact resistant
housing / window:
- temperature-resistant up to 100 ° C
- oil- and solvent-resistant (but not resistant to alcohol)
pointer: plastic, Langer hand: red
Short pointer: black scale: aluminum, anodized matt
graduations and figures black
pendulum system on ball bearings
IP 67 protection
aluminum, plastic-coated, black, RAL 9005, textured finish
Clamping bores unprocessed
Fastening / transmission elements
screw DIN 912
hex nuts DIN 985
Locating Pins, drivers stainless steel, stainless steel 1.4301
arresting GN200 and simplify complex partial and indexing devices, such as shift lever, latches, index pins and other safety elements
Material:
- Steel
or
- stainless steel (NI), Material No. 1.4305
versions:
Type A: knob without scale (with steel variant: burnished)
Type AS: knob scale engraved with laser precision, reference line on locking (for steel version: satin chrome and black deposed)
form B: lever with one lever, bürniert (only in steel version available)
form C: Rocker with two adjustment levers, burnished (available only in steel design)
keyway P9 DIN 6885:
sheet 1 for bore K10
sheet 2 for drilling> K10
Fixed cylindrical handles GN539 (plastic, thermoplastic black , shiny) (only form B and C)
Aluminium, plastic-coated, black, textured matt
Guide bore unprocessed
Cylinder screws DIN 912, stainless steel, 1.4301
Hexagon nuts DIN 985, stainless steel, 1.4304 <
>
Die-cast aluminum
- Machined hub
- Turned wheel rim
- Plastic-coated
Colours:
- Black, RAL 9005, textured matt
- silver, RAL 9006, textured matt
concentricity and axial run-out deviation of the wheel rim < 0,4
folding handles GN798.7: plastic, thermoplastic, black, matt
folding mechanism: steel, burnished
Die-cast aluminum
- Machined hub
- Turned wheel rim
- Plastic-coated
Colours:
- Black, RAL 9005, textured matt
- silver, RAL 9006, textured matt
concentricity and axial run-out deviation of the wheel rim < 0,4
folding handles GN798.7: plastic, thermoplastic, black, matt
folding mechanism: steel, burnished
Aluminium, plastic-coated, black, RAL 9005, textured matt
Square clamp, unprocessed
Cylinder screws DIN 912, stainless steel, 1.4301
Hexagon nuts DIN 985, stainless steel , 1.4301
Plastic, thermoplastic (PP), FDA certified, reinforced, impact-resistant, temperature-resistant up to 80 °C, black, matt
Reversible handles: plastic, thermoplastic (PA) , FDA certified, black, matt, rotatable
folding mechanism, hub bushing and cover: stainless steel, rustproof 1.4301hub cover: self-adhesive
Plastic: duroplastic (PF), reinforced, temperature-resistant up to 110 °C, black, glossy
Flashing: polished
Hub bush: steel, burnished
Reversible handles: Plastic, Duroplast, black, glossy, rotatable
Reversible mechanism: Steel, burnished
Features:
Steel
- Eccentrical and thrust washer: casehardened
- Bolt: nitrided, grade 8.8
- Ball handle: burnished
ball knob DIN 319
plastic
thermoset
black, shiny
Eccentrical GN 918 allow for a relatively long movement and high clamping force a rapid and safe clamping and releasing
advantage. In every position is the clamping effect equal and self-locking
Plastic, thermoplastic (polypropylene PP): reinforced, impact-resistant, temperature-resistant up to 80 °C, black, matt
Hub bush: stainless steel, rustproof, 1.4301
Cover : plastic, light gray
folding handle: plastic, thermoplastic (polyamide PA), black, matt, folding mechanism / axle part, stainless steel, 1.4305
Plastic, thermoplastic (polyamide PA), glass fiber reinforced, temperature-resistant up to 100 °C, black, matt
Hub bush: steel, burnished
Cover: plastic, black , matt
folding handle: rotatable, plastic, thermoplastic, black, matt
folding mechanism: steel, burnished
stainless steel, stainless, 1.4308, dull blasted (NI) or
Aluminum, plastic coated, black, RAL 9005, textured finish (SW)
Clamping bores machined
sliding insert: plastic (PA / PTFE)
screw DIN 912 stainless steel 1.4301
hex nuts DIN 985, stainless steel 1.4301
Wheel body Plastic, thermoplastic (polyamide PA), reinforced, impact-resistant, temperature-resistant up to 100 °C, black, matt
Hub bush: steel, burnished
MS- Threaded socket for screwing in the cylindrical handle
Rotating cylindrical handles: plastic, thermoplastic black, matt
Threaded pin DIN 916 with hexagon socket and cup point
Die-cast aluminium, plastic-coated, black, RAL 9005, textured matt
Pressure screws: stainless steel
The GN298 housings for angle/T gears are used in conjunction with bevel gears GN297 and linear/transmission units.
Die-cast aluminum
- Machined hub
- Turned wheel rim
- Plastic-coated
Colours:
- Black, RAL 9005, textured matt
- silver, RAL 9006, textured matt
concentricity and axial run-out deviation of the wheel rim < 0,4
folding handles GN798.3: plastic, thermoplastic, black, matt
folding mechanism: steel, burnished
Die-cast aluminium:
- Hub machined
- Wheel rim turned on all sides
- Wheel body completely plastic-coated
- Black, textured matt
Concentricity - and run-out deviation of the wheel rim under IT 12
Gear wheel: plastic (polyamide PA), glass fiber reinforced
Screw for anchor pin: steel, blued, injected
Rotatable cylinder handles GN 798 (plastic, thermoplastic, black, matt)
Steel
Eccentrical and thrust washer casehardened
bolt nitrided grade 8.8
ball handle, burnished
Ball knob DIN 319
plastic
thermoset
black, shiny
In connection with clamping bars recommended the use of ball turnbuckles GN605 with flattened ball.
Steel
Eccentrical and thrust washer casehardened
bolt nitrided grade 8.8
ball handle, burnished
Ball knob DIN 319
plastic
thermoset
black, shiny
In connection with clamping bars recommended the use of ball turnbuckles GN605 with flattened ball.
Aluminium, plastic-coated, black, RAL 9005, textured matt
Guide bores machined
Sliding insert plastic (PA / PTFE)
Cylinder screws DIN 912, stainless steel , 1.4301
Hexagon nuts DIN 985, stainless steel, 1.4301
Stainless steel, 1.4308, matt blasted or
Aluminum, plastic-coated, black, RAL 9005, textured matt
Guide / clamping bores machined
Sliding insert Plastic (PA / PTFE)
Cylinder screws DIN 912, stainless steel, 1.4301
Hexagon nuts DIN 985, stainless steel, 1.4301
stainless steel, stainless, 1.4308, dull blasted (NI) or
Aluminum, plastic coated, black, RAL 9005, textured finish (SW)
Clamping bores machined
sliding insert: plastic (PA / PTFE)
DIN 912 cylinder bolts, stainless steel, 1.4301
hex nuts DIN 985, stainless steel, 1.4301
Plastic thermoplastic (polypropylene PP), reinforced, impact-resistant, temperature-resistant up to 80 °C, black, matt
Hub bush: steel, burnished
Cover: <
> - Plastic, black with d1 = 80
- Plastic, light gray with d1 > 80
Reversible handle: Plastic, thermoplastic (polyamide PA) black, matt, rotatable
Reversible mechanism / axle part: Steel, burnished
Aluminium, plastic-coated, black, RAL 9005, textured matt
Guide bores machined
Sliding insert plastic (PA / PTFE)
Cylinder screws DIN 912, stainless steel , 1.4301
Hexagon nuts DIN 985, stainless steel, 1.4301
stainless steel, stainless, 1.4308, dull blasted or
Aluminum, plastic coated, black, textured finish
Clamping bores machined
sliding insert: plastic (PA / PTFE)
cap screws DIN 912, stainless steel 1.4301
hex nuts DIN 985, stainless steel 1.4301
Die-cast aluminium:
- machined hub
- wheel rim turned
- plastic-coated
colours:
- black, RAL 9005, textured matt
- silver, RAL 9006, textured matt
Concentricity and axial runout deviation of the wheel rim < 0,4
Reversible handles GN 798.3: Plastic, thermoplastic, black, matt
Reversible mechanism : Steel, blued
Stainless steel, 1.4308, matt blasted or
Aluminum, plastic-coated, black, textured matt
Guide bore machined
Sliding insert: plastic (PA / PTFE )
Cylinder screws DIN 912, stainless steel, 1.4301
Hexagon nuts DIN 985, stainless steel, 1.4301
Plastic (KT)
Thermoplastic (Polyamide PA): thermally stable up to 90 ° C
black, matt
rotatable
Retractable mechanism Stainless
axle
Material No. 1.4305 Attachment
Sintered steel
SteelNI 1.4404