Plastic
scrapers: PUR plastic, gray
stiffening core: Galvanized steel
cap screws: DIN 912 Galvanized steel, blue passivated (screws are included)
( with the size h1 = 18, the scraper is fixed only with a central screw.)
Aluminium, plastic-coated, black, RAL 9005, textured matt
Guide bores machined
Sliding insert plastic (PA / PTFE)
Cylinder screws DIN 912, stainless steel , 1.4301
Hexagon nuts DIN 985, stainless steel, 1.4301
Aluminium, plastic-coated, black, RAL 9005, textured matt
Guide bores machined
Sliding insert plastic (PA / PTFE)
Cylinder screws DIN 912, stainless steel , 1.4301
Hexagon nuts DIN 985, stainless steel, 1.4301
Aluminium, plastic-coated, black, RAL 9005, textured matt
Square clamp, unprocessed
Cylinder screws DIN 912, stainless steel, 1.4301
Hexagon nuts DIN 985, stainless steel , 1.4301
Stainless steel, 1.4308, matt blasted or
Aluminum, plastic-coated, black, textured matt
Guide bore machined
Sliding insert: plastic (PA / PTFE )
Cylinder screws DIN 912, stainless steel, 1.4301
Hexagon nuts DIN 985, stainless steel, 1.4301
Aluminium, plastic-coated, black, textured matt
Guide bore unprocessed
Cylinder screws DIN 912, stainless steel, 1.4301
Hexagon nuts DIN 985, stainless steel, 1.4304 <
>
plastic, thermoplastic (Polyamide PA)
temperature resistant up to 110 ° C
color (matt): black, RAL 9005SWSW or red, RAL 3000RTRT
Variant SBL:
Housing: sheet steel, zinc plated, blue passivated
Ball: steel, bare
variant SKU:
housing: sheet steel, zinc plated, blue passivated
ball: plastic (polyacetal POM)
variant SNI:
housing: sheet steel, zinc plated, blue passivated
ball: stainless steel, stainless, 1.4034
variant NNI:
housing: stainless steel sheet 1.4301
ball: stainless steel, stainless, 1.4034
Rail profile: Steel, zinc-plated, blue passivated
Balls: Roller bearing steel, hardened
Ball cage: Plastic
Locks: Die-cast zinc / plastic
Rubber stop: plastic / elastomer
Operating temperature -20 °C to 100 °CVersions: - B - with rubber stop - M - with rubber stop, rear locking - K - with rubber stop, front locking - Q - with rubber stop, rear-front locking via Through Holes
Plastic, Duroplast (PF)
temperature resistant up to 110 ° C
black, shiny
axle: stainless steel, Material No. 1.4305, dull blasted
stainless steel
- Eccentrical: Material No. 1.4305, Electroless nickel
- Bolt and washer: stainless, 1.4542, tempered
- Ball control: non-corrosive, 1.4305, dull blasted
ball knob DIN 319
plastic
thermoset
black, shiny
In connection with clamping bars recommended the use of ball screws GN 605 with flattened ball.
Plastic (KT)
Thermoplastic (Polyamide PA): thermally stable up to 90 ° C
black, matt
rotatable
Retractable mechanism Stainless
axle
Material No. 1.4305
Attachment
Sintered steel
SteelNI 1.4404
stainless steel
- Eccentrical: Material No. 1.4305, Electroless nickel
- Bolt and washer: stainless, 1.4542, tempered
- Ball control: non-corrosive, 1.4305, dull blasted
ball knob DIN 319
plastic
thermoset
black, shiny
Leverage:
Stainless steel (investment casting), stainless 1.4308
axis tension nut
adjusting nut and screw (only type A)
stainless steel, stainless 1.4305
Contact plate:
Type A:
plastic (polyacetal POM), glass fiber reinforced
form B:
plastic (polyamide PA) glass fiber reinforced,
stainless steel
- Eccentrical: Material No. 1.4305, Electroless nickel
- Bolt and washer: stainless, 1.4542, tempered
- Ball control: non-corrosive, 1.4305, dull blasted
ball knob DIN 319
plastic
thermoset
black, shiny
In connection with clamping bars recommended the use of ball screws GN 605 with flattened ball.
Body:
plastic, thermoplastic (polypropylene PP)
sheathed with a soft elastomer (TPE)
70 Shore A
temperature 80 ° C
black-gray, matt RAL 7021
Softline lagging:
chemically bonded to the plastic core
bush:
stainless steel, material No. 1.4305
Color of the cap:
- black-gray, RAL 7021, matt
- orange, RAL 2004, matt
- gray, RAL 7035, matt
- yellow, RAL 1021, matt
- blue, RAL 5024, matt
- red, RAL 3000, matt
thermoplastic (polypropylene PP)
sheathed with a soft elastomer (TPE)
70 Shore A
temperature 80 ° C
black, matt
Softline lagging and plastic core chemically bonded
Plastic
thermoplastic (polypropylene PP)
Softline lagging
elastomer (TPE) 70 Shore A with the plastic core
chemically bonded
with FDA approval
temperature resistant up to 80 ° C
black, matt
plastic, thermoplastic (polypropylene PP)
sheathed with a soft elastomer (TPE)
70 Shore A
temperature 80 ° C
black gray, matte , similar to RAL 7021
Softline lagging
chemically bonded to the plastic core
versions
- with threaded rod: steel, zinc plated, blue passivated
- with socket: brass
Plastic (KT)
Thermoplastic (Polyamide PA): thermally stable up to 90 ° C
black, matt
rotatable
Retractable mechanism
axle
Steel 1.0718, browned
Attachment
Sintered steel, burnished
Plastic (KT)
Thermoplastic (Polyamide PA): thermally stable up to 90 ° C
black, matt
rotatable
Retractable mechanism Stainless
axle
Material No. 1.4305 Attachment
Sintered steel
SteelNI 1.4404
Stainless Steel (NI):
- thickness 0.6 mm
- scale etched
plastic (KUS):
- thickness 0.3 mm
- silver deposited
- scale printed
forms:
- S - digits arranged perpendicularly
digit sequences:
U - zero point below
M - zero centrally
O - zero point above
- W - figures arranged horizontally
digit sequences:
L - zero left
M - zero centrally
R - zero right
Wheel body: Aluminum
- Wheel rim turned on all sides and highly polished
Coupling elements: Steel, nitrated
- Running surfaces ground or PTFE-coated
- Bearing flange burnished, fixed
Rotatable cylinder handles GN598: Plastic, Duroplast, black, glossy
Axle part: Steel, zinc-plated, blue passivated
Wheel body made of aluminium:
- Wheel rim turned on all sides and highly polished
- Unprocessed surfaces plastic-coated, black, textured matt
Coupling elements: Steel, hardened, treads ground
Cover cap: Plastic, light gray
Rotatable cylindrical handles GN598: Steel, plastic-coated, black, textured matt
Shaft part steel: zinc-plated, blue passivated
With needle bearing
Die-cast aluminum
- Machined hub
- Turned wheel rim
- Plastic-coated
Colours:
- Black, RAL 9005, textured matt
- silver, RAL 9006, textured matt
concentricity and axial run-out deviation of the wheel rim < 0,4
folding handles GN798.7: plastic, thermoplastic, black, matt
folding mechanism: steel, burnished
Die-cast aluminum
- Machined hub
- Turned wheel rim
- Plastic-coated
Colours:
- Black, RAL 9005, textured matt
- silver, RAL 9006, textured matt
concentricity and axial run-out deviation of the wheel rim < 0,4
folding handles GN798.7: plastic, thermoplastic, black, matt
folding mechanism: steel, burnished
Thermoplastic (Polyamide PA): thermally stable up to 90 ° C
black, matt
Aluminum (AL)
polished
axle
steel zinc plated, blue passivated
Thermoplastic (Polyamide PA): thermally stable up to 90 ° C
black, matt
Stainless Steel (NI)
Material No. 1.4305 finely turned, download blank
axle
stainless
Material No. 1.4305
,
plastic, thermoplastic (polyamide PA)
temperature 80 ° C
black, matt
axle: galvanized steel
Plastic
thermosetting plastic (PF)
temperature resistant up to 110 ° C
Black, shiny
axle: galvanized steel, blue passivated
aluminum and anodized black
Lid: plastic, light gray
Collet / hexagon nut: Brass
Stainless steel screw DIN 916 with internal hexagon and serrated point
aluminum, anodized black
scale ring: plastic, black, pressed
arrow (Type A) and scale (Type S; 0th ..9, 20 subdivisions), white, engraved with laser precision
lid: plastic, light gray
collet / hexagon nut: brass
stainless steel screw DIN 916 with internal hexagon and serrated point
Body:
- aluminum (Form N)
- steel (Form R / Type S), plated and blue passivated
wheels:
- bearing steel, hardened ball bearing, sealed (2 RS), lifetime lubrication
wiper:
plastic, PUR, gray
steel core, galvanized
Fits running rail GN2422
outer ring: plastic (polyacetal POM)
Operating Temperature: 0 ° ... 40 ° C
inner race / balls: steel, bare
threaded pin (code 2): galvanized steel
O-ring rubber NBR (Nitrile), 70 Shore A (only in shape: circular)
Die-cast aluminum
- Machined hub
- Turned wheel rim
- Plastic-coated
Colours:
- Black, RAL 9005, textured matt
- silver, RAL 9006, textured matt
concentricity and axial run-out deviation of the wheel rim < 0,4
folding handles GN798.3: plastic, thermoplastic, black, matt
folding mechanism: steel, burnished
Plastic (KT)
Thermoplastic (Polyamide PA): thermally stable up to 90 ° C
black, matt
rotatable
Retractable mechanism
steel burnished
Stainless Steel (NI)
- thickness 0.6 mm
- scale etched
plastic (KUS)
- Strength 0 , 3mm
- silver deposited
- printed scale
Housing: Steel, plastic-coated, black, textured matt
Shaft: Stainless steel, rustproof, 1.4305, matt blasted
Wearing parts: Steel, hardened
Switch knob: GN719.1, Plastic, Duroplast, Black, Glossy
thermoplastic (Polyamide PA)
black, shiny
terminal
stainless steel
Material No. 1.4305
or galvanized steel
plastic
Duroplast (PF)
temperature resistant up to 110 ° C
black, shiny