Zubehör
Thread insert for applications when a metal thread is needed with plastic parts.
M5
Insert lenght: 6.6 mm
Thread insert for applications when a metal thread is needed with plastic parts.
M4
Insert lenght: 5.5 mm
Thread insert for applications when a metal thread is needed with plastic parts.
M3
Insert lenght: 5.2 mm
Thermal paste to improve heat conduction;
Coat your heater and thermistor cartridges before
Activated alumina desiccant is 10x more powerful than comparable silica gel, and is non-toxic!
Creates
Silver base thermal paste to improve heat conduction;
Coat your heater and thermistor
A screw kit for printable mounts
Kit includes:
- 2 x M5 thread inserts
- 2 x M5 x 10 low-head screws
Standardmount for Bondtech QR Extruder
3D printed in ABS, M5 thread inserts.
2x mounting holes for M5,
Mount for Bondtech QR Extruder to Ultimaker 1.
3D printed in ABS,M5 thread inserts in brass.
High precision PTFE tube (Poly Tetra Fluoro Ethylene)
Inside Diameter: 4.0mm, Outside Diameter: 6.0mm
For 3.0 mm filament
High precision PTFE tube (Poly Tetra Fluoro Ethylene)
Inside Diameter: 3.18mm, Outside Diameter: 6.4mm
For 2.85/3.0mm filament
High precision PTFE tube (Poly Tetra Fluoro Ethylene)
Inside Diameter: 2.0mm, Outside Diameter: 4.0mm
For 1.75 mm filament.
PTFE Diameters: 3.18/6.4 mm, Length: 100 cm
PTFE Diameters: 4/6 mm, Length: 60 cm
PTFE Diameters: 4/6 mm, Length: 40 cm
PTFE Diameters: 4/6 mm, Length: 100 cm
PTFE Diameters: 2/4 mm, Length: 60 cm
PTFE Diameters: 2/4 mm, Length: 40 cm
PTFE Diameters: 2/4 mm, Length: 100 cm
PTFE Diameters: 3.18/6.4 mm, Length: 60 cm
PTFE Diameters: 3.18/6.4 mm, Length: 40 cm
Prevents plastic adhesion to your nozzles and hotblock
Water-based PTFE nanosuspension
Repels plastic from the outside of
NEMA17 high resolution 1.8 degree pancake stepper motor.
Delivers with a 300 mm JST-XH6 cable stripped without a second connector.
NEMA17 Pancake stepper with a 150mm long not detachable stripped cable with connector.
NEMA17 geared stepper with a planetary gear reducer.
Delivered with a 700 mm long JST-XH6 to PC2510 cable with quick-fit connectors.
700mm
PC2510 4-pin connector to JST-XH6 6-pin connector.
700mm
JST-XH4 4-pin connector to JST-PH6 6-pin connector.
Adapt the Mosquito and Mosquito Magnum hotends to Bondtech QR and BMG extruders using the
Adapt the Mosquito and Mosquito Magnum hotends to Bondtech QR and BMG extruders using the
The Mosquito Silicone Boot is:
Made from platinum cured silicone for higher temperature resistance
Thickly
This Convection Shield is only compatible with:
Mosquito Magnum+ Liquid Cooled 1.75mm
Mosquito Magnum+ Liquid
Plastic and mounting hardware set
For PERCH setup on CR-6 SE and CR-6 Max Strain Gauge
Plastic and mounting hardware set
For PERCH setup on CR-10 Smart Strain Gauge plates
Plastic parts made
Use this mount to attach your Copperhead Groove Mount hotend directly to the LGX Lite.
Laser
Use this mount to install the LGX Lite on a MGN9C or MGN9H carriage.
Laser Sintered
Use this mount to install the LGX Lite on a MGN7C or MGN7H carriage.
Laser Sintered
Use this mount to install the LGX Lite on a MGN12C or MGN12H carriage.
Laser Sintered
Orbiter style mount to use with the LGX Lite extruder.
Use this set to drop-in replace
Spare part for the Bondtech LGX® Lite
Voron Logo Design
Front housing made of grey Polyamide without
Spare part for the Bondtech LGX® Lite
Desert Design
Front housing made of grey Polyamide without dyeing.
Spare part for the Bondtech LGX® Lite
Cubes Design
Front housing made of grey Polyamide without dyeing.
Spare part for the Bondtech LGX® Lite
BeeHive Design
Front housing made of grey Polyamide without dyeing.
Use this mount to attach your Mosquito or Mosquito Magnum hotend directly to the LGX
Nema14 High resolution 1.8 degree pancake stepper motor.
Compatible with the following compact extruders:
LGX Lite
Orbiter
HextrudORT
Sherpa Mini
Heatsink in black anodized aluminum to remove heat from desired component.
Equipped with self-adhesive on the back for easy attachment.
Fits good on NEMA17 stepper motors.
Filament guide for 2.85/3.0 mm filament that fits in the bottom of the QR, BMG and V2 extruder.
3D printed in black ABS/PLA.
Filament guide for 1.75mm filament that fits in the bottom of the QR, BMG and V2 extruder.
3D printed in black ABS/PLA.