Zubehör
Cable Interface: JST-PH6 to Dupont No Lock
Cable Interface: JST-PH6 to JST-XH6
An adapter for earlier model N1/N2 printers that have silver colored stepper motors in order to connect the new Bondtech DualDirect Extruder.
An adapter for earlier model N1/N2 printers that have silver colored stepper motors in order to connect the new Bondtech SingleDirect Extruder.
This mount for BMG extruder is CNC machined to precise tolerances in 3 mm thick aluminium that assures a secure and stable mounting for the extruder.
Original Bondtech® OEM set of parts to use on the HextrudORT
from the HevORT project.
Original Bondtech® OEM set of parts to use on the Sherpa Mini
from the Annex
Plug & Play Interface Cable- Ferrules
50mm Interface cable with
Molex micro-fit 3.0 male connector on one
Plug & Play Interface Cable - JST SMP-02V-BC
50mm Interface cable with
Molex micro-fit 3.0 male connector
Plug & Play Interface Cable - JST VHR-2N
50mm Interface cable with
Molex micro-fit 3.0 male connector
Plug & Play Interface Cable - JST XH-2 With Lock
50mm Interface cable with
Molex micro-fit 3.0
Plug & Play Interface Cable - JST XHP-2
50mm Interface cable with
Molex micro-fit 3.0 male connector
Plug & Play Interface Cable - Molex MX-50-57-9002
50mm Interface cable with
Molex micro-fit 3.0 male connector
The Copperhead Silicone Boot is:
Compatible with Copperhead hotends only.
Made from platinum cured silicone
Adapter with an integrated push-fit connector.
CNC-machined in black anodized aluminium, push-fit connector for 4mm tube.
Adapter with an integrated push-fit connector.
CNC-machined in black anodized aluminium, push-fit connector for 6mm tube.
Bondtech drive gear kit in hardened and surface protected steel.
Precision cnc-machined.
This drivegear kit set consisting of a primary drive gear, a secondary drive gear, bearings and a shaft.
Bondtech drive gear kit in hardened and surface protected steel.
Precision cnc-machined.
This drivegear kit set consisting of a primary drive gear, a secondary drive gear, bearings and a shaft.
Bondtech drive gear kit in hardened and surface protected steel.
Precision cnc-machined.
This drivegear kit set consisting of a primary drive gear, a secondary drive gear, bearings and a shaft.
Filament guide for 1.75mm filament that fits in the bottom of the QR, BMG and V2 extruder.
3D printed in black ABS/PLA.
Filament guide for 2.85/3.0 mm filament that fits in the bottom of the QR, BMG and V2 extruder.
3D printed in black ABS/PLA.
Heatsink in black anodized aluminum to remove heat from desired component.
Equipped with self-adhesive on the back for easy attachment.
Fits good on NEMA17 stepper motors.
Nema14 High resolution 1.8 degree pancake stepper motor.
Compatible with the following compact extruders:
LGX Lite
Orbiter
HextrudORT
Sherpa Mini
Use this mount to attach your Mosquito or Mosquito Magnum hotend directly to the LGX
Spare part for the Bondtech LGX® Lite
BeeHive Design
Front housing made of grey Polyamide without dyeing.
Spare part for the Bondtech LGX® Lite
Cubes Design
Front housing made of grey Polyamide without dyeing.
Spare part for the Bondtech LGX® Lite
Desert Design
Front housing made of grey Polyamide without dyeing.
Spare part for the Bondtech LGX® Lite
Voron Logo Design
Front housing made of grey Polyamide without
Orbiter style mount to use with the LGX Lite extruder.
Use this set to drop-in replace
Use this mount to install the LGX Lite on a MGN12C or MGN12H carriage.
Laser Sintered
Use this mount to install the LGX Lite on a MGN7C or MGN7H carriage.
Laser Sintered
Use this mount to install the LGX Lite on a MGN9C or MGN9H carriage.
Laser Sintered
Use this mount to attach your Copperhead Groove Mount hotend directly to the LGX Lite.
Laser
Plastic and mounting hardware set
For PERCH setup on CR-10 Smart Strain Gauge plates
Plastic parts made
Plastic and mounting hardware set
For PERCH setup on CR-6 SE and CR-6 Max Strain Gauge
This Convection Shield is only compatible with:
Mosquito Magnum+ Liquid Cooled 1.75mm
Mosquito Magnum+ Liquid
The Mosquito Silicone Boot is:
Made from platinum cured silicone for higher temperature resistance
Thickly
Adapt the Mosquito and Mosquito Magnum hotends to Bondtech QR and BMG extruders using the
Adapt the Mosquito and Mosquito Magnum hotends to Bondtech QR and BMG extruders using the
700mm
JST-XH4 4-pin connector to JST-PH6 6-pin connector.
700mm
PC2510 4-pin connector to JST-XH6 6-pin connector.
NEMA17 geared stepper with a planetary gear reducer.
Delivered with a 700 mm long JST-XH6 to PC2510 cable with quick-fit connectors.
NEMA17 Pancake stepper with a 150mm long not detachable stripped cable with connector.
NEMA17 high resolution 1.8 degree pancake stepper motor.
Delivers with a 300 mm JST-XH6 cable stripped without a second connector.
Prevents plastic adhesion to your nozzles and hotblock
Water-based PTFE nanosuspension
Repels plastic from the outside of
PTFE Diameters: 3.18/6.4 mm, Length: 40 cm