Steel
Steel, black oxide finish
Screw: strength class 5.52 (version with grub screw)
Steel, blued
Cover: plastic, light gray
Ball knobs: DIN319, plastic, duroplast, black, glossy
Retaining ring: plastic (polyacetal) <
>
Steel, burnished
Lid: Plastic, light gray
Screw: Strength class 5.8
Ball knobs: DIN319, plastic, Duroplast, black, glossy
Circlip: Plastic (polyacetal)
Adjustable hand Lever | Zinc Die Cast
plastic coated
Black RAL 9005, textured finish
Screw stud and retaining screw
stainless
Material No. 1.4305
The assembly tools GN 928.1 are used for mounting of clamping elements "Span round" GN 928.
Material: Steel
Steel, hardened
Teeth: milled, curved teeth, for linear/transition units
Versions:
L - 1 bevel gear, left-handed
R - 1 bevel gear, clockwise
W - Bevel gear set, 2 bevel gears, 1 x right-hand, 1 x left-hand
T - Bevel gear set, 3 bevel gears, 1 x right-hand, 2 x left-hand
steel, bare
centering clamps GN 411.2 workpieces from the inside outward in its bore are centrally positioned and clamped
steel:.
hardened, blackened
clamping balls / segments: hardened
, finish, ground
black dampfoxidiert
Head screw to DIN 912
Steel, phosphated
Steel, hardened
Running surfaces ground
Steel, nitrated
Running surfaces ground or PTFE-coated
Guide tubes: tube DIN 2391, steel, chrome-plated
End pieces/slides/adapter plate: aluminium, plastic-coated, black, RAL 9005, textured matt
Trapezoidal thread spindle: steel, blank, ball bearings, positioning accuracy ±0.2 mm / 300 mm stroke
Guide tubes: tube DIN 2391, steel, chrome-plated
End pieces/slides: aluminium, plastic-coated, black, RAL 9005, textured matt
Trapezoidal thread spindle: steel, bright, ball bearing, positioning accuracy ±0.2 mm / 300 mm stroke
Guide tube:
Tube DIN 2391, steel, chrome-plated (SCR) or
Tube DIN 2462, stainless steel, 1.4301 (NI) <
>
Shaft: Steel or stainless steel with ball bearings
End plug: Plastic
Features:
Steel
- Eccentrical and thrust washer: casehardened
- Bolt: nitrided, grade 8.8
- Ball handle: burnished
ball knob DIN 319
plastic
thermoset
black, shiny
Eccentrical GN 918 allow for a relatively long movement and high clamping force a rapid and safe clamping and releasing
advantage. In every position is the clamping effect equal and self-locking
Plastic thermoplastic (polypropylene PP), reinforced, impact-resistant, temperature-resistant up to 80 °C, black, matt
Hub bush: steel, burnished
Cover: <
> - Plastic, black with d1 = 80
- Plastic, light gray with d1 > 80
Reversible handle: Plastic, thermoplastic (polyamide PA) black, matt, rotatable
Reversible mechanism / axle part: Steel, burnished
Plastic: duroplastic (PF), reinforced, temperature-resistant up to 110 °C, black, glossy
Flashing: polished
Hub bush: steel, burnished
Reversible handles: Plastic, Duroplast, black, glossy, rotatable
Reversible mechanism: Steel, burnished
Plastic, thermoplastic (polyamide PA)
- glass fiber reinforced
- temperature resistant up to 100 °C
- black, matt
bushing and anchor pin: Steel, burnished
Screw for anchor pin injected
Threaded pin DIN 916 with hexagon socket and cup point
Plastic, thermoplastic (polyamide PA)
- glass fiber reinforced
- temperature resistant up to 100 °C
- black, matt
bushing: steel, burnished or stainless steel, rustproof, 1.4305
Threaded pin: DIN 916 with hexagon socket and cup point, steel or stainless steel, rustproof, 1.4301
Plastic, thermoplastic (polyamide PA)
- glass fiber reinforced
- temperature resistant up to 120 °C
- black, shiny
hub: steel, burnished
Plastic Technopolymer (Polyamide PA)
- glass reinforced
- temperature resistant up to 100 ° C
- black, matt
Bush and anchor pin: steel, blackened
screw anchor pin injected
threaded pin DIN 916 with a hexagon socket and serrated
Plastic, thermoplastic (polyamide PA), glass fiber reinforced, temperature-resistant up to 110 °C, black, shiny
Hub bush: steel, burnished
Shaft: steel, matt chrome-plated
Cylinder knobs GN519: plastic, duroplast black, glossy
Plastic, thermoplastic (polypropylene PP), reinforced, impact-resistant, temperature-resistant up to 80 °C, black, matt
Hub bush: steel, burnished
Reversible handles: plastic , thermoplastic (polyamide PA) black, matt, rotatable
folding mechanism: steel, burnished
steel, finely turned, burnished
The flat knobs GN 75 are characterized by their compact and timeless design.
Steel
Runner rail:
- Tempered steel, zinc-plated, blue passivated
- Raceways hardened
Balls: Roller bearing steel, hardened
Ball cage: Steel, galvanized
Pipe DIN 2391, steel, chrome-plated (SCR)
Trapezoidal thread spindle: steel, ball bearing
Guide nut: gunmetal
End plug: plastic
Pipe DIN 2391, steel, chrome-plated (SCR)
Trapezoidal thread spindle: steel, ball bearing
Guide nut: gunmetal
End plug: plastic
arresting GN200 and simplify complex partial and indexing devices, such as shift lever, latches, index pins and other safety elements
Material:
- Steel
or
- stainless steel (NI), Material No. 1.4305
versions:
Type A: knob without scale (with steel variant: burnished)
Type AS: knob scale engraved with laser precision, reference line on locking (for steel version: satin chrome and black deposed)
form B: lever with one lever, bürniert (only in steel version available)
form C: Rocker with two adjustment levers, burnished (available only in steel design)
keyway P9 DIN 6885:
sheet 1 for bore K10
sheet 2 for drilling> K10
Fixed cylindrical handles GN539 (plastic, thermoplastic black , shiny) (only form B and C)
Adapter shaft: Steel, burnished
Torque support: Aluminum, black anodized
Adapter shaft: Steel, burnished
Torque support: Aluminum, black anodized
Adapter shaft: Steel, burnished
Torque support: Aluminum, bright, tumbled
Rail profile: steel, zinc-plated, blue passivated
Balls: roller bearing steel, hardened
Ball cage: steel, zinc-plated
Rubber stop: plastic / elastomer
Operating temperature -20 °C to 100 °C
Rail profile: steel, zinc-plated, blue passivated
Balls: roller bearing steel, hardened
Ball cage: steel, zinc-plated
Rubber stop: plastic / elastomer
Operating temperature -20 °C to 100 °C
Rail profile: Steel, galvanized, blue passivated
Balls: Roller bearing steel, hardened
Ball cage, outer rail: Plastic
Ball cage, inner rail: Steel, galvanized
Rubber stop and separating function: plastic / elastomer
Operating temperature -20 °C to 100 °C
Rail profile: steel, zinc-plated, blue passivated
Balls: roller bearing steel, hardened
Ball cage: steel, zinc-plated
Rubber stop: plastic / elastomer
Operating temperature -20 °C to 100 °C
Rail profile: steel, zinc-plated, blue passivated
Balls: roller bearing steel, hardened
Ball cage: steel, zinc-plated
Operating temperature -20 °C to 100 °C C
Rail profile: steel, zinc-plated, blue passivated
Balls: roller bearing steel, hardened
Ball cage: steel, zinc-plated
Rubber stop: plastic / elastomer
Operating temperature -20 °C to 100 °C
Rail profile: steel, zinc-plated, blue passivated
Balls: roller bearing steel, hardened
Ball cage: steel, zinc-plated
Rubber stop: plastic / elastomer
Cushioned self-closing: Steel / plastic
Operating temperature -20 °C to 100 °C
Rail profile: steel, zinc-plated, blue passivated
Balls: roller bearing steel, hardened
Ball cage: steel, zinc-plated
Rubber stop: plastic / elastomer
Self-closing: stainless steel / plastic
Operating temperature -20 °C to 100 °C
Rail profile: steel, zinc-plated, blue passivated
Balls: roller bearing steel, hardened
Ball cage: steel, zinc-plated
Rubber stop: plastic / elastomer
Self-closing: stainless steel / plastic
Operating temperature -20 °C to 100 °C
Rail profile: Steel, galvanized, blue passivated
Balls: Roller bearing steel, hardened
Ball cage, outer rail: Plastic
Ball cage, inner rail: Steel, galvanized
Rubber stop: plastic / elastomer
Self-closing: galvanized steel / elastomer
Operating temperature -20 °C to 100 °C
Steel
- Skalieransatz d1 finely turned
- satin chrome plated, without scale (MCR)
- satin chrome plated, engraved with standard scale, deposed black with laser precision (MCRS)
scale 0 ... 90, 100 divisions, corr. scaling scheme d1 / 100A RA 0-10 20 ... 90/10
Housing: Steel, plastic-coated, black, textured matt
Shaft: Stainless steel, rustproof, 1.4305, matt blasted
Wearing parts: Steel, hardened
Switch knob: GN719.1, Plastic, Duroplast, Black, Glossy
Material:
Steel, blackened or
Stainless Steel (NI), non-corrosive, 1.4307
outer ring: plastic (polyacetal POM)
Operating Temperature: 0 ° ... 40 ° C
inner race / balls: steel, bare
threaded pin (code 2): galvanized steel
O-ring rubber NBR (Nitrile), 70 Shore A (only in shape: circular)
roller: bearing steel
hardened, dust-proof, splash-proof, lifetime lubrication
sealing discs: plastic (NBR) 2 RS
journals : steel
galvanized, blue passivated
Turntable: stainless steel, 1.4305
Other components: steel (partially galvanized) or brass
Knob: aluminum, black anodized
Body: steel, chrome-plated
Spindle: steel, bare
knob: aluminum, anodized, black
hex bolt: steel, zinc plated, blue passivated (only form S1)
scales: engraved with laser precision, absolutely resistant to abrasion
lid: plastic, light gray
attachment and socket:
steel, blackened
clamping mechanism:
steel, hardened and ground
scale ring and Adjustment:
aluminum, black anodized
scale / arrow (Type A, KS, S)
engraved with laser precision
centrally aligned between two mounting holes
Duroplast (PF)
temperature resistant up to 110 ° C
black, shiny
Plastic (KT)
Thermoplastic (polypropylene PP)
temperature 80 ° C
black, matt
black, shiny (only size 14)
Steel (ST)
plastic coated
black, textured finish
axle
steel zinc plated, blue passivated
Aluminium:
- Hub machined
- Wheel rim turned on all sides
Concentricity and axial runout of the wheel rim < 0,4
Wheel body:
- Wheel rim highly polished
- unmachined surfaces blasted
Rotating cylindrical handles GN 598: Steel, plastic-coated, black, textured matt
With needle bearing
Wheel body made of aluminium:
- Wheel rim turned on all sides and highly polished
- Unprocessed surfaces plastic-coated, black, textured matt
Coupling elements: Steel, hardened, treads ground
Cover cap: Plastic, light gray
Rotatable cylindrical handles GN598: Steel, plastic-coated, black, textured matt
Shaft part steel: zinc-plated, blue passivated
With needle bearing
Aluminium:
- Hub machined
- Wheel rim turned on all sides
Run-out and axial run-out deviation of the wheel rim < 0,4
Wheel body completely plastic-coated, black, textured matt <
> Rotating cylindrical handles GN598: Steel, plastic-coated, black, textured matt
With needle bearing
Aluminium:
- Hub machined
- Wheel rim turned on all sides
Concentricity and axial runout of the wheel rim < 0,4
Wheel body:
- Wheel rim highly polished
- unmachined surfaces blasted
Rotating cylindrical handles GN 598: Steel, plastic-coated, black, textured matt
With needle bearing
Aluminium:
- Hub machined
- Wheel rim turned on all sides
Concentricity and axial runout of the wheel rim < 0,4
Wheel body:
- Wheel rim highly polished
- unmachined surfaces blasted
Rotatable cylindrical handles GN 598: Steel, plastic-coated, black, textured mattWith plain bearing
Aluminium:
- Hub machined
- Wheel rim turned on all sides
Concentricity and axial runout of the wheel rim < 0,4
Wheel body:
- Wheel rim highly polished
- unmachined surfaces blasted
Rotating cylindrical handles GN 598: Steel, plastic-coated, black, textured matt
With plain bearing
Aluminium:
- Hub machined
- Wheel rim turned on all sides
Concentricity and axial run-out deviation of the wheel rim < 0,4
Wheel body: completely plastic-coated, black, textured matt
Revolving cylindrical handles GN 598: Steel, plastic-coated, black, textured matt
With plain bearing
Wheel body: Aluminum
- Wheel rim turned on all sides and highly polished
Coupling elements: Steel, nitrated
- Running surfaces ground or PTFE-coated
- Bearing flange burnished, fixed
Rotatable cylinder handles GN598: Plastic, Duroplast, black, glossy
Axle part: Steel, zinc-plated, blue passivated
Steel:
- knurled milled
- Skalieransatz d1 finely turned
- satin chrome plated, without scale (MCR)
- satin chrome plated, with standard scale, engraved with laser precision, offset in black (MCRS)
scale 0 ... 90, 100 divisions, corr. scaling scheme d1 / 100A RA 0-10 20 ... 90 / 13Spannring rubber
friction ring Polyamid®
Steel, burnished
Ball knob DIN319: Plastic, Duroplast, black, glossy
Square tube: steel, chrome-plated (SCR)
Trapezoidal thread spindle: steel, ball bearing
Guide nut: gunmetal
End plug: plastic
Steel, burnished
Ball knob DIN319: Plastic, Duroplast, black, glossy
Steel, burnished
Ball knob DIN319: Plastic, Duroplast, black, glossy
Running rail / running rail:
Heat-treated steel
- zinc-plated, blue passivated
- raceways hardened
Balls: roller bearing steel, hardened
Ball cage: Steel, zinc plated
Running rail / running rail:
Heat-treated steel
- zinc-plated, blue passivated
- raceways hardened
Balls: roller bearing steel, hardened
Ball cage: Steel, zinc-plated
Track connection
- Binding rivets, stainless steel (h1 = 28, 35)
- Screws, steel, zinc-plated (h1 = 43)
Running rail / running rail:
Heat-treated steel
- zinc-plated, blue passivated
- raceways hardened
Balls: roller bearing steel, hardened
Ball cage: Steel, zinc-plated
Ball cage intermediate plate: Steel, zinc-plated
Running rail / running rail:
Heat-treated steel
- zinc-plated, blue passivated
- raceways hardened
Balls: roller bearing steel, hardened
Ball cage: Galvanized steel
Track connection:
Screws, galvanized steel
Rail profile: Steel, zinc-plated, blue passivated
Balls: Roller bearing steel, hardened
Ball cage: Plastic
Locks: Die-cast zinc / plastic
Rubber stop: plastic / elastomer
Operating temperature -20 °C to 100 °CVersions: - B - with rubber stop - M - with rubber stop, rear locking - K - with rubber stop, front locking - Q - with rubber stop, rear-front locking via Through Holes
Variant SBL:
Housing: sheet steel, zinc plated, blue passivated
Ball: steel, bare
variant SKU:
housing: sheet steel, zinc plated, blue passivated
ball: plastic (polyacetal POM)
variant SNI:
housing: sheet steel, zinc plated, blue passivated
ball: stainless steel, stainless, 1.4034
variant NNI:
housing: stainless steel sheet 1.4301
ball: stainless steel, stainless, 1.4034
Housing: steel, turned, zinc-plated, blue passivated
Ball: steel, bare
You do not have a support collar, but take the load on the housing diameter d2.
SBL:
Housing: steel, turned, zinc-plated, blue passivated
Ball: steel, bare
SNI:
housing: steel, turned, zinc-plated, blue passivated
ball: stainless steel, stainless, 1.4034
NNI:
housing: stainless steel, 1.4028 and Material No. 1.4305 (only size 15)
ball: stainless steel, stainless, 1.4034
scrapers: PUR plastic, gray
stiffening core: Galvanized steel
cap screws: DIN 912 Galvanized steel, blue passivated (screws are included)
( with the size h1 = 18, the scraper is fixed only with a central screw.)