Steel
Items 1 - 50 of 89
Features:
Steel
Steel
In stock
Spring plunger with ball, design selectable
In stock
Technical data:
outer ring: plastic (polyacetal POM)
Operating Temperature: 0 ° ... 40 ° C
inner race / balls: steel, bare
threaded pin (code 2): galvanized steel
O-ring rubber NBR (Nitrile), 70 Shore A (only in shape: circular)
outer ring: plastic (polyacetal POM)
Operating Temperature: 0 ° ... 40 ° C
inner race / balls: steel, bare
threaded pin (code 2): galvanized steel
O-ring rubber NBR (Nitrile), 70 Shore A (only in shape: circular)
In stock
Weld-on handle, design selectable
Features:
steel, finely turned, burnished
The flat knobs GN 75 are characterized by their compact and timeless design.
steel, finely turned, burnished
The flat knobs GN 75 are characterized by their compact and timeless design.
In stock
Plastic (KU)
Duroplast (PF)
temperature resistant up to 110 ° C
black, shiny
Plastic (KT)
Thermoplastic (polypropylene PP)
temperature 80 ° C
black, matt
black, shiny (only size 14)
Steel (ST)
plastic coated
black, textured finish
axle
steel zinc plated, blue passivated
Duroplast (PF)
temperature resistant up to 110 ° C
black, shiny
Plastic (KT)
Thermoplastic (polypropylene PP)
temperature 80 ° C
black, matt
black, shiny (only size 14)
Steel (ST)
plastic coated
black, textured finish
axle
steel zinc plated, blue passivated
In stock
Sintered steel (Distaloy AB) black, dampfoxidiert. Cap screw DIN 912, steel, phosphated.
In stock
Features:
Material:
Steel, blackened or
Stainless Steel (NI), non-corrosive, 1.4307
Material:
Steel, blackened or
Stainless Steel (NI), non-corrosive, 1.4307
In stock
Fixed palm grip, design selectable
In stock
Angled bow handle, design selectable
Features:
Housing: steel, turned, zinc-plated, blue passivated
Ball: steel, bare
You do not have a support collar, but take the load on the housing diameter d2.
Housing: steel, turned, zinc-plated, blue passivated
Ball: steel, bare
You do not have a support collar, but take the load on the housing diameter d2.
Technical data:
Plastic, thermoplastic (polyamide PA)
- glass fiber reinforced
- temperature resistant up to 120 °C
- black, shiny
hub: steel, burnished
Plastic, thermoplastic (polyamide PA)
- glass fiber reinforced
- temperature resistant up to 120 °C
- black, shiny
hub: steel, burnished
Top rated
Sintered steel (Distaloy AB)
black dampfoxidiert
Head screw to DIN 912
Steel, phosphated
black dampfoxidiert
Head screw to DIN 912
Steel, phosphated
In stock
Features:
Variant SBL:
Housing: sheet steel, zinc plated, blue passivated
Ball: steel, bare
variant SKU:
housing: sheet steel, zinc plated, blue passivated
ball: plastic (polyacetal POM)
variant SNI:
housing: sheet steel, zinc plated, blue passivated
ball: stainless steel, stainless, 1.4034
Variant SBL:
Housing: sheet steel, zinc plated, blue passivated
Ball: steel, bare
variant SKU:
housing: sheet steel, zinc plated, blue passivated
ball: plastic (polyacetal POM)
variant SNI:
housing: sheet steel, zinc plated, blue passivated
ball: stainless steel, stainless, 1.4034
variant NNI:
housing: stainless steel sheet 1.4301
ball: stainless steel, stainless, 1.4034
In stock
Holes ISO E8, feather keyways according to DIN 6885/1 (from hole 24 with flat keyway 1.3 mm). British Standard (BS) inch bores with keyway. Ground cone and front face. Thread BSW. Delivery including screws. Screw size BSW 1/4" x 1/2". Width across flats 3 mm. Shaft tolerance +0.05 / -0.125 mm. Can be used with or without a key, depending on the torque required.
In stock
Bores ISO E8, keyways according to DIN 6885/1 (bore 28 with flat keyway 1.3 mm). British Standard (BS) inch bores with keyway. Ground cone and front face. Thread BSW. Delivery including screws. Screw size BSW 1/4" x 1/2". Width across flats 3mm. Shaft tolerance +0.05 / -0.125 mm. Can be used with or without a key, depending on the torque required.
Features:
steel, bare
steel, bare
In stock
Ring gear for flexible couplings, standard, 98 ° Shore A
In stock
Features:
Steel:
- knurled milled
- Skalieransatz d1 finely turned
- satin chrome plated, without scale (MCR)
- satin chrome plated, with standard scale, engraved with laser precision, offset in black (MCRS)
scale 0 ... 90, 100 divisions, corr. scaling scheme d1 / 100A RA 0-10 20 ... 90 / 13Spannring rubber
Steel:
- knurled milled
- Skalieransatz d1 finely turned
- satin chrome plated, without scale (MCR)
- satin chrome plated, with standard scale, engraved with laser precision, offset in black (MCRS)
scale 0 ... 90, 100 divisions, corr. scaling scheme d1 / 100A RA 0-10 20 ... 90 / 13Spannring rubber
friction ring Polyamid®
Features:
SBL:
Housing: steel, turned, zinc-plated, blue passivated
Ball: steel, bare
SNI:
housing: steel, turned, zinc-plated, blue passivated
ball: stainless steel, stainless, 1.4034
NNI:
housing: stainless steel, 1.4028 and Material No. 1.4305 (only size 15)
ball: stainless steel, stainless, 1.4034
SBL:
Housing: steel, turned, zinc-plated, blue passivated
Ball: steel, bare
SNI:
housing: steel, turned, zinc-plated, blue passivated
ball: stainless steel, stainless, 1.4034
NNI:
housing: stainless steel, 1.4028 and Material No. 1.4305 (only size 15)
ball: stainless steel, stainless, 1.4034
In stock
Holes ISO E8, keyways according to DIN 6885/1. British Standard (BS) inch bores with keyway. Ground cone and front face. Thread BSW. Delivery including screws. Screw size BSW 3/8" x 5/8". Width across flats 5mm. Shaft tolerance +0.05 / -0.125 mm. Can be used with or without a key, depending on the torque required.
Technical data:
Steel, burnished
Ball knob DIN319: Plastic, Duroplast, black, glossy
Steel, burnished
Ball knob DIN319: Plastic, Duroplast, black, glossy
Features:
Steel
- Skalieransatz d1 finely turned
- satin chrome plated, without scale (MCR)
- satin chrome plated, engraved with standard scale, deposed black with laser precision (MCRS)
scale 0 ... 90, 100 divisions, corr. scaling scheme d1 / 100A RA 0-10 20 ... 90/10
Steel
- Skalieransatz d1 finely turned
- satin chrome plated, without scale (MCR)
- satin chrome plated, engraved with standard scale, deposed black with laser precision (MCRS)
scale 0 ... 90, 100 divisions, corr. scaling scheme d1 / 100A RA 0-10 20 ... 90/10
In stock
Ring gear for flexible couplings, standard, 98 ° Shore A
Features:
scrapers: PUR plastic, gray
stiffening core: Galvanized steel
cap screws: DIN 912 Galvanized steel, blue passivated (screws are included)
( with the size h1 = 18, the scraper is fixed only with a central screw.)
scrapers: PUR plastic, gray
stiffening core: Galvanized steel
cap screws: DIN 912 Galvanized steel, blue passivated (screws are included)
( with the size h1 = 18, the scraper is fixed only with a central screw.)
In stock
Horizontal clamp, design selectable
Technical data:
Adapter shaft: Steel, burnished
Torque support: Aluminum, black anodized
Adapter shaft: Steel, burnished
Torque support: Aluminum, black anodized
Technical data:
Steel, black oxide finish
Screw: strength class 5.52 (version with grub screw)
Steel, black oxide finish
Screw: strength class 5.52 (version with grub screw)
In stock
ST steel, sintered steel (Distaloy AB) black, dampfoxidiert
Adjustable hand Lever | Zinc Die Cast
plastic coated
Black RAL 9005, textured finish
Screw stud and retaining screw
stainless
Material No. 1.4305
Adjustable hand Lever | Zinc Die Cast
plastic coated
Black RAL 9005, textured finish
Screw stud and retaining screw
stainless
Material No. 1.4305
Technical data:
Plastic, thermoplastic (polyamide PA), glass fiber reinforced, temperature-resistant up to 110 °C, black, shiny
Hub bush: steel, burnished
Shaft: steel, matt chrome-plated
Cylinder knobs GN519: plastic, duroplast black, glossy
Plastic, thermoplastic (polyamide PA), glass fiber reinforced, temperature-resistant up to 110 °C, black, shiny
Hub bush: steel, burnished
Shaft: steel, matt chrome-plated
Cylinder knobs GN519: plastic, duroplast black, glossy
Technical data:
Steel, burnished
Ball knob DIN319: Plastic, Duroplast, black, glossy
Steel, burnished
Ball knob DIN319: Plastic, Duroplast, black, glossy
Technical data:
Plastic, thermoplastic (polyamide PA)
- glass fiber reinforced
- temperature resistant up to 100 °C
- black, matt
bushing: steel, burnished or stainless steel, rustproof, 1.4305
Threaded pin: DIN 916 with hexagon socket and cup point, steel or stainless steel, rustproof, 1.4301
Plastic, thermoplastic (polyamide PA)
- glass fiber reinforced
- temperature resistant up to 100 °C
- black, matt
bushing: steel, burnished or stainless steel, rustproof, 1.4305
Threaded pin: DIN 916 with hexagon socket and cup point, steel or stainless steel, rustproof, 1.4301
In stock
Holes ISO E8, keyways according to DIN 6885/1. British Standard (BS) inch bores with keyway. Ground cone and front face. Thread BSW. Delivery including screws. Screw size BSW 7/16 x 7/8". Width across flats 6 mm. Shaft tolerance +0.05 / -0.125 mm. Can be used with or without a key, depending on the torque required.
Features:
The assembly tools GN 928.1 are used for mounting of clamping elements "Span round" GN 928.
Material: Steel
The assembly tools GN 928.1 are used for mounting of clamping elements "Span round" GN 928.
Material: Steel
Vertical clamp, design selectable
In stock
Technical data:
Steel, blued
Cover: plastic, light gray
Ball knobs: DIN319, plastic, duroplast, black, glossy
Retaining ring: plastic (polyacetal) <
>
Steel, blued
Cover: plastic, light gray
Ball knobs: DIN319, plastic, duroplast, black, glossy
Retaining ring: plastic (polyacetal) <
>
Technical data:
Steel, burnished
Lid: Plastic, light gray
Screw: Strength class 5.8
Ball knobs: DIN319, plastic, Duroplast, black, glossy
Circlip: Plastic (polyacetal)
Steel, burnished
Lid: Plastic, light gray
Screw: Strength class 5.8
Ball knobs: DIN319, plastic, Duroplast, black, glossy
Circlip: Plastic (polyacetal)
Technical data:
Plastic, thermoplastic (polypropylene PP), reinforced, impact-resistant, temperature-resistant up to 80 °C, black, matt
Hub bush: steel, burnished
Reversible handles: plastic , thermoplastic (polyamide PA) black, matt, rotatable
folding mechanism: steel, burnished
Plastic, thermoplastic (polypropylene PP), reinforced, impact-resistant, temperature-resistant up to 80 °C, black, matt
Hub bush: steel, burnished
Reversible handles: plastic , thermoplastic (polyamide PA) black, matt, rotatable
folding mechanism: steel, burnished
Features:
roller: bearing steel
hardened, dust-proof, splash-proof, lifetime lubrication
sealing discs: plastic (NBR) 2 RS
journals : steel
galvanized, blue passivated
roller: bearing steel
hardened, dust-proof, splash-proof, lifetime lubrication
sealing discs: plastic (NBR) 2 RS
journals : steel
galvanized, blue passivated
Technical data:
Rail profile: steel, zinc-plated, blue passivated
Balls: roller bearing steel, hardened
Ball cage: steel, zinc-plated
Operating temperature -20 °C to 100 °C C
Rail profile: steel, zinc-plated, blue passivated
Balls: roller bearing steel, hardened
Ball cage: steel, zinc-plated
Operating temperature -20 °C to 100 °C C
In stock
Elastic coupling RNT for Taper bushes
Technical data:
Rail profile: Steel, galvanized, blue passivated
Balls: Roller bearing steel, hardened
Ball cage, outer rail: Plastic
Ball cage, inner rail: Steel, galvanized
Rubber stop and separating function: plastic / elastomer
Operating temperature -20 °C to 100 °C
Rail profile: Steel, galvanized, blue passivated
Balls: Roller bearing steel, hardened
Ball cage, outer rail: Plastic
Ball cage, inner rail: Steel, galvanized
Rubber stop and separating function: plastic / elastomer
Operating temperature -20 °C to 100 °C
Technical data:
Steel, hardened
Teeth: milled, curved teeth, for linear/transition units
Versions:
L - 1 bevel gear, left-handed
R - 1 bevel gear, clockwise
W - Bevel gear set, 2 bevel gears, 1 x right-hand, 1 x left-hand
T - Bevel gear set, 3 bevel gears, 1 x right-hand, 2 x left-hand
Steel, hardened
Teeth: milled, curved teeth, for linear/transition units
Versions:
L - 1 bevel gear, left-handed
R - 1 bevel gear, clockwise
W - Bevel gear set, 2 bevel gears, 1 x right-hand, 1 x left-hand
T - Bevel gear set, 3 bevel gears, 1 x right-hand, 2 x left-hand
Elastic coupling RNT for Taper bushes
Technical data:
Rail profile: steel, zinc-plated, blue passivated
Balls: roller bearing steel, hardened
Ball cage: steel, zinc-plated
Rubber stop: plastic / elastomer
Operating temperature -20 °C to 100 °C
Rail profile: steel, zinc-plated, blue passivated
Balls: roller bearing steel, hardened
Ball cage: steel, zinc-plated
Rubber stop: plastic / elastomer
Operating temperature -20 °C to 100 °C
Technical data:
Rail profile: Steel, galvanized, blue passivated
Balls: Roller bearing steel, hardened
Ball cage, outer rail: Plastic
Ball cage, inner rail: Steel, galvanized
Rubber stop: plastic / elastomer
Self-closing: galvanized steel / elastomer
Operating temperature -20 °C to 100 °C
Rail profile: Steel, galvanized, blue passivated
Balls: Roller bearing steel, hardened
Ball cage, outer rail: Plastic
Ball cage, inner rail: Steel, galvanized
Rubber stop: plastic / elastomer
Self-closing: galvanized steel / elastomer
Operating temperature -20 °C to 100 °C
Technical data:
Adapter shaft: Steel, burnished
Torque support: Aluminum, black anodized
Adapter shaft: Steel, burnished
Torque support: Aluminum, black anodized
Technical data:
Plastic, thermoplastic (polyamide PA)
- glass fiber reinforced
- temperature resistant up to 100 °C
- black, matt
bushing and anchor pin: Steel, burnished
Screw for anchor pin injected
Threaded pin DIN 916 with hexagon socket and cup point
Plastic, thermoplastic (polyamide PA)
- glass fiber reinforced
- temperature resistant up to 100 °C
- black, matt
bushing and anchor pin: Steel, burnished
Screw for anchor pin injected
Threaded pin DIN 916 with hexagon socket and cup point
Features:
Plastic Technopolymer (Polyamide PA)
- glass reinforced
- temperature resistant up to 100 ° C
- black, matt
Bush and anchor pin: steel, blackened
screw anchor pin injected
threaded pin DIN 916 with a hexagon socket and serrated
Plastic Technopolymer (Polyamide PA)
- glass reinforced
- temperature resistant up to 100 ° C
- black, matt
Bush and anchor pin: steel, blackened
screw anchor pin injected
threaded pin DIN 916 with a hexagon socket and serrated
Technical data:
Plastic thermoplastic (polypropylene PP), reinforced, impact-resistant, temperature-resistant up to 80 °C, black, matt
Hub bush: steel, burnished
Cover: <
> - Plastic, black with d1 = 80
- Plastic, light gray with d1 > 80
Reversible handle: Plastic, thermoplastic (polyamide PA) black, matt, rotatable
Reversible mechanism / axle part: Steel, burnished
Plastic thermoplastic (polypropylene PP), reinforced, impact-resistant, temperature-resistant up to 80 °C, black, matt
Hub bush: steel, burnished
Cover: <
> - Plastic, black with d1 = 80
- Plastic, light gray with d1 > 80
Reversible handle: Plastic, thermoplastic (polyamide PA) black, matt, rotatable
Reversible mechanism / axle part: Steel, burnished
Items 1 - 50 of 89