Steel
scrapers: PUR plastic, gray
stiffening core: Galvanized steel
cap screws: DIN 912 Galvanized steel, blue passivated (screws are included)
( with the size h1 = 18, the scraper is fixed only with a central screw.)
Guide tube:
Tube DIN 2391, steel, chrome-plated (SCR) or
Tube DIN 2462, stainless steel, 1.4301 (NI) <
>
Shaft: Steel or stainless steel with ball bearings
End plug: Plastic
arresting GN200 and simplify complex partial and indexing devices, such as shift lever, latches, index pins and other safety elements
Material:
- Steel
or
- stainless steel (NI), Material No. 1.4305
versions:
Type A: knob without scale (with steel variant: burnished)
Type AS: knob scale engraved with laser precision, reference line on locking (for steel version: satin chrome and black deposed)
form B: lever with one lever, bürniert (only in steel version available)
form C: Rocker with two adjustment levers, burnished (available only in steel design)
keyway P9 DIN 6885:
sheet 1 for bore K10
sheet 2 for drilling> K10
Fixed cylindrical handles GN539 (plastic, thermoplastic black , shiny) (only form B and C)
Steel
steel, bare
Guide tubes: tube DIN 2391, steel, chrome-plated
End pieces/slides/adapter plate: aluminium, plastic-coated, black, RAL 9005, textured matt
Trapezoidal thread spindle: steel, blank, ball bearings, positioning accuracy ±0.2 mm / 300 mm stroke
Guide tubes: tube DIN 2391, steel, chrome-plated
End pieces/slides: aluminium, plastic-coated, black, RAL 9005, textured matt
Trapezoidal thread spindle: steel, bright, ball bearing, positioning accuracy ±0.2 mm / 300 mm stroke
Duroplast (PF)
temperature resistant up to 110 ° C
black, shiny
Plastic (KT)
Thermoplastic (polypropylene PP)
temperature 80 ° C
black, matt
black, shiny (only size 14)
Steel (ST)
plastic coated
black, textured finish
axle
steel zinc plated, blue passivated
attachment and socket:
steel, blackened
clamping mechanism:
steel, hardened and ground
scale ring and Adjustment:
aluminum, black anodized
scale / arrow (Type A, KS, S)
engraved with laser precision
centrally aligned between two mounting holes
Body: steel, chrome-plated
Spindle: steel, bare
knob: aluminum, anodized, black
hex bolt: steel, zinc plated, blue passivated (only form S1)
scales: engraved with laser precision, absolutely resistant to abrasion
lid: plastic, light gray
Turntable: stainless steel, 1.4305
Other components: steel (partially galvanized) or brass
Knob: aluminum, black anodized
Plastic: duroplastic (PF), reinforced, temperature-resistant up to 110 °C, black, glossy
Flashing: polished
Hub bush: steel, burnished
Reversible handles: Plastic, Duroplast, black, glossy, rotatable
Reversible mechanism: Steel, burnished
Plastic Technopolymer (Polyamide PA)
- glass reinforced
- temperature resistant up to 100 ° C
- black, matt
Bush and anchor pin: steel, blackened
screw anchor pin injected
threaded pin DIN 916 with a hexagon socket and serrated
Plastic, thermoplastic (polyamide PA)
- glass fiber reinforced
- temperature resistant up to 100 °C
- black, matt
bushing and anchor pin: Steel, burnished
Screw for anchor pin injected
Threaded pin DIN 916 with hexagon socket and cup point
Plastic, thermoplastic (polyamide PA)
- glass fiber reinforced
- temperature resistant up to 100 °C
- black, matt
bushing: steel, burnished or stainless steel, rustproof, 1.4305
Threaded pin: DIN 916 with hexagon socket and cup point, steel or stainless steel, rustproof, 1.4301
Plastic, thermoplastic (polyamide PA)
- glass fiber reinforced
- temperature resistant up to 120 °C
- black, shiny
hub: steel, burnished
Plastic, thermoplastic (polyamide PA), glass fiber reinforced, temperature-resistant up to 110 °C, black, shiny
Hub bush: steel, burnished
Shaft: steel, matt chrome-plated
Cylinder knobs GN519: plastic, duroplast black, glossy
Plastic thermoplastic (polypropylene PP), reinforced, impact-resistant, temperature-resistant up to 80 °C, black, matt
Hub bush: steel, burnished
Cover: <
> - Plastic, black with d1 = 80
- Plastic, light gray with d1 > 80
Reversible handle: Plastic, thermoplastic (polyamide PA) black, matt, rotatable
Reversible mechanism / axle part: Steel, burnished
Plastic, thermoplastic (polypropylene PP), reinforced, impact-resistant, temperature-resistant up to 80 °C, black, matt
Hub bush: steel, burnished
Reversible handles: plastic , thermoplastic (polyamide PA) black, matt, rotatable
folding mechanism: steel, burnished
steel, finely turned, burnished
The flat knobs GN 75 are characterized by their compact and timeless design.
Steel, hardened
Teeth: milled, curved teeth, for linear/transition units
Versions:
L - 1 bevel gear, left-handed
R - 1 bevel gear, clockwise
W - Bevel gear set, 2 bevel gears, 1 x right-hand, 1 x left-hand
T - Bevel gear set, 3 bevel gears, 1 x right-hand, 2 x left-hand
SBL:
Housing: steel, turned, zinc-plated, blue passivated
Ball: steel, bare
SNI:
housing: steel, turned, zinc-plated, blue passivated
ball: stainless steel, stainless, 1.4034
NNI:
housing: stainless steel, 1.4028 and Material No. 1.4305 (only size 15)
ball: stainless steel, stainless, 1.4034
Housing: steel, turned, zinc-plated, blue passivated
Ball: steel, bare
You do not have a support collar, but take the load on the housing diameter d2.
Variant SBL:
Housing: sheet steel, zinc plated, blue passivated
Ball: steel, bare
variant SKU:
housing: sheet steel, zinc plated, blue passivated
ball: plastic (polyacetal POM)
variant SNI:
housing: sheet steel, zinc plated, blue passivated
ball: stainless steel, stainless, 1.4034
variant NNI:
housing: stainless steel sheet 1.4301
ball: stainless steel, stainless, 1.4034
Steel, nitrated
Running surfaces ground or PTFE-coated
Steel, hardened
Running surfaces ground
outer ring: plastic (polyacetal POM)
Operating Temperature: 0 ° ... 40 ° C
inner race / balls: steel, bare
threaded pin (code 2): galvanized steel
O-ring rubber NBR (Nitrile), 70 Shore A (only in shape: circular)
roller: bearing steel
hardened, dust-proof, splash-proof, lifetime lubrication
sealing discs: plastic (NBR) 2 RS
journals : steel
galvanized, blue passivated
Pipe DIN 2391, steel, chrome-plated (SCR)
Trapezoidal thread spindle: steel, ball bearing
Guide nut: gunmetal
End plug: plastic
Pipe DIN 2391, steel, chrome-plated (SCR)
Trapezoidal thread spindle: steel, ball bearing
Guide nut: gunmetal
End plug: plastic
Runner rail:
- Tempered steel, zinc-plated, blue passivated
- Raceways hardened
Balls: Roller bearing steel, hardened
Ball cage: Steel, galvanized
Adapter shaft: Steel, burnished
Torque support: Aluminum, black anodized
Adapter shaft: Steel, burnished
Torque support: Aluminum, black anodized
Adapter shaft: Steel, burnished
Torque support: Aluminum, bright, tumbled
Housing: Steel, plastic-coated, black, textured matt
Shaft: Stainless steel, rustproof, 1.4305, matt blasted
Wearing parts: Steel, hardened
Switch knob: GN719.1, Plastic, Duroplast, Black, Glossy
Material:
Steel, blackened or
Stainless Steel (NI), non-corrosive, 1.4307
Steel, burnished
Ball knob DIN319: Plastic, Duroplast, black, glossy
Steel, burnished
Ball knob DIN319: Plastic, Duroplast, black, glossy
Steel, burnished
Ball knob DIN319: Plastic, Duroplast, black, glossy
The assembly tools GN 928.1 are used for mounting of clamping elements "Span round" GN 928.
Material: Steel
Aluminium:
- Hub machined
- Wheel rim turned on all sides
Concentricity and axial runout of the wheel rim < 0,4
Wheel body:
- Wheel rim highly polished
- unmachined surfaces blasted
Rotating cylindrical handles GN 598: Steel, plastic-coated, black, textured matt
With plain bearing
Aluminium:
- Hub machined
- Wheel rim turned on all sides
Concentricity and axial run-out deviation of the wheel rim < 0,4
Wheel body: completely plastic-coated, black, textured matt
Revolving cylindrical handles GN 598: Steel, plastic-coated, black, textured matt
With plain bearing
Aluminium:
- Hub machined
- Wheel rim turned on all sides
Concentricity and axial runout of the wheel rim < 0,4
Wheel body:
- Wheel rim highly polished
- unmachined surfaces blasted
Rotatable cylindrical handles GN 598: Steel, plastic-coated, black, textured mattWith plain bearing
Aluminium:
- Hub machined
- Wheel rim turned on all sides
Concentricity and axial runout of the wheel rim < 0,4
Wheel body:
- Wheel rim highly polished
- unmachined surfaces blasted
Rotating cylindrical handles GN 598: Steel, plastic-coated, black, textured matt
With needle bearing
Wheel body made of aluminium:
- Wheel rim turned on all sides and highly polished
- Unprocessed surfaces plastic-coated, black, textured matt
Coupling elements: Steel, hardened, treads ground
Cover cap: Plastic, light gray
Rotatable cylindrical handles GN598: Steel, plastic-coated, black, textured matt
Shaft part steel: zinc-plated, blue passivated
With needle bearing
Aluminium:
- Hub machined
- Wheel rim turned on all sides
Concentricity and axial runout of the wheel rim < 0,4
Wheel body:
- Wheel rim highly polished
- unmachined surfaces blasted
Rotating cylindrical handles GN 598: Steel, plastic-coated, black, textured matt
With needle bearing
Aluminium:
- Hub machined
- Wheel rim turned on all sides
Run-out and axial run-out deviation of the wheel rim < 0,4
Wheel body completely plastic-coated, black, textured matt <
> Rotating cylindrical handles GN598: Steel, plastic-coated, black, textured matt
With needle bearing
Wheel body: Aluminum
- Wheel rim turned on all sides and highly polished
Coupling elements: Steel, nitrated
- Running surfaces ground or PTFE-coated
- Bearing flange burnished, fixed
Rotatable cylinder handles GN598: Plastic, Duroplast, black, glossy
Axle part: Steel, zinc-plated, blue passivated
Steel:
- knurled milled
- Skalieransatz d1 finely turned
- satin chrome plated, without scale (MCR)
- satin chrome plated, with standard scale, engraved with laser precision, offset in black (MCRS)
scale 0 ... 90, 100 divisions, corr. scaling scheme d1 / 100A RA 0-10 20 ... 90 / 13Spannring rubber
friction ring Polyamid®
Features:
Steel
- Eccentrical and thrust washer: casehardened
- Bolt: nitrided, grade 8.8
- Ball handle: burnished
ball knob DIN 319
plastic
thermoset
black, shiny
Eccentrical GN 918 allow for a relatively long movement and high clamping force a rapid and safe clamping and releasing
advantage. In every position is the clamping effect equal and self-locking
Adjustable hand Lever | Zinc Die Cast
plastic coated
Black RAL 9005, textured finish
Screw stud and retaining screw
stainless
Material No. 1.4305
black dampfoxidiert
Head screw to DIN 912
Steel, phosphated
Steel
- Skalieransatz d1 finely turned
- satin chrome plated, without scale (MCR)
- satin chrome plated, engraved with standard scale, deposed black with laser precision (MCRS)
scale 0 ... 90, 100 divisions, corr. scaling scheme d1 / 100A RA 0-10 20 ... 90/10
Running rail / running rail:
Heat-treated steel
- zinc-plated, blue passivated
- raceways hardened
Balls: roller bearing steel, hardened
Ball cage: Steel, zinc-plated
Track connection
- Binding rivets, stainless steel (h1 = 28, 35)
- Screws, steel, zinc-plated (h1 = 43)
Running rail / running rail:
Heat-treated steel
- zinc-plated, blue passivated
- raceways hardened
Balls: roller bearing steel, hardened
Ball cage: Steel, zinc plated
Running rail / running rail:
Heat-treated steel
- zinc-plated, blue passivated
- raceways hardened
Balls: roller bearing steel, hardened
Ball cage: Steel, zinc-plated
Ball cage intermediate plate: Steel, zinc-plated
Running rail / running rail:
Heat-treated steel
- zinc-plated, blue passivated
- raceways hardened
Balls: roller bearing steel, hardened
Ball cage: Galvanized steel
Track connection:
Screws, galvanized steel
Rail profile: Steel, zinc-plated, blue passivated
Balls: Roller bearing steel, hardened
Ball cage: Plastic
Locks: Die-cast zinc / plastic
Rubber stop: plastic / elastomer
Operating temperature -20 °C to 100 °CVersions: - B - with rubber stop - M - with rubber stop, rear locking - K - with rubber stop, front locking - Q - with rubber stop, rear-front locking via Through Holes
Rail profile: steel, zinc-plated, blue passivated
Balls: roller bearing steel, hardened
Ball cage: steel, zinc-plated
Operating temperature -20 °C to 100 °C C
Rail profile: steel, zinc-plated, blue passivated
Balls: roller bearing steel, hardened
Ball cage: steel, zinc-plated
Rubber stop: plastic / elastomer
Operating temperature -20 °C to 100 °C
Rail profile: steel, zinc-plated, blue passivated
Balls: roller bearing steel, hardened
Ball cage: steel, zinc-plated
Rubber stop: plastic / elastomer
Operating temperature -20 °C to 100 °C
Rail profile: steel, zinc-plated, blue passivated
Balls: roller bearing steel, hardened
Ball cage: steel, zinc-plated
Rubber stop: plastic / elastomer
Operating temperature -20 °C to 100 °C
Rail profile: Steel, galvanized, blue passivated
Balls: Roller bearing steel, hardened
Ball cage, outer rail: Plastic
Ball cage, inner rail: Steel, galvanized
Rubber stop and separating function: plastic / elastomer
Operating temperature -20 °C to 100 °C
Rail profile: steel, zinc-plated, blue passivated
Balls: roller bearing steel, hardened
Ball cage: steel, zinc-plated
Rubber stop: plastic / elastomer
Operating temperature -20 °C to 100 °C
Rail profile: steel, zinc-plated, blue passivated
Balls: roller bearing steel, hardened
Ball cage: steel, zinc-plated
Rubber stop: plastic / elastomer
Cushioned self-closing: Steel / plastic
Operating temperature -20 °C to 100 °C
Rail profile: steel, zinc-plated, blue passivated
Balls: roller bearing steel, hardened
Ball cage: steel, zinc-plated
Rubber stop: plastic / elastomer
Self-closing: stainless steel / plastic
Operating temperature -20 °C to 100 °C
Rail profile: steel, zinc-plated, blue passivated
Balls: roller bearing steel, hardened
Ball cage: steel, zinc-plated
Rubber stop: plastic / elastomer
Self-closing: stainless steel / plastic
Operating temperature -20 °C to 100 °C
Rail profile: Steel, galvanized, blue passivated
Balls: Roller bearing steel, hardened
Ball cage, outer rail: Plastic
Ball cage, inner rail: Steel, galvanized
Rubber stop: plastic / elastomer
Self-closing: galvanized steel / elastomer
Operating temperature -20 °C to 100 °C
Steel, burnished
Lid: Plastic, light gray
Screw: Strength class 5.8
Ball knobs: DIN319, plastic, Duroplast, black, glossy
Circlip: Plastic (polyacetal)
Steel, blued
Cover: plastic, light gray
Ball knobs: DIN319, plastic, duroplast, black, glossy
Retaining ring: plastic (polyacetal) <
>
Steel, black oxide finish
Screw: strength class 5.52 (version with grub screw)
Square tube: steel, chrome-plated (SCR)
Trapezoidal thread spindle: steel, ball bearing
Guide nut: gunmetal
End plug: plastic
centering clamps GN 411.2 workpieces from the inside outward in its bore are centrally positioned and clamped
steel:.
hardened, blackened
clamping balls / segments: hardened
, finish, ground