Stainless steel
Items 1 - 50 of 73
In stock
Fixed palm grip, design selectable
Eye bolt, design selectable
In stock
High knurled screw, design selectable
In stock
Execution burnished steel or stainless steel
Knurled nut, design selectable
In stock
Flat knurled screw, design selectable
Ball lifting pin, design selectable
Technical data:
Stainless steel, 1.4305, matt blasted
Lid: plastic, light gray
Ball knobs: DIN319, plastic, duroplast, black, glossy
Retaining ring: Plastic (polyacetal)
Stainless steel, 1.4305, matt blasted
Lid: plastic, light gray
Ball knobs: DIN319, plastic, duroplast, black, glossy
Retaining ring: Plastic (polyacetal)
Features:
stainless steel, stainless, 1.4308, dull blasted (NI) or
Aluminum, plastic coated, black, RAL 9005, textured finish (SW)
Clamping bores machined
sliding insert: plastic (PA / PTFE)
DIN 912 cylinder bolts, stainless steel, 1.4301
hex nuts DIN 985, stainless steel, 1.4301
stainless steel, stainless, 1.4308, dull blasted (NI) or
Aluminum, plastic coated, black, RAL 9005, textured finish (SW)
Clamping bores machined
sliding insert: plastic (PA / PTFE)
DIN 912 cylinder bolts, stainless steel, 1.4301
hex nuts DIN 985, stainless steel, 1.4301
Features:
stainless steel, stainless, 1.4308, dull blasted (NI) or
Aluminum, plastic coated, black, RAL 9005, textured finish (SW)
Clamping bores machined
sliding insert: plastic (PA / PTFE)
screw DIN 912 stainless steel 1.4301
hex nuts DIN 985, stainless steel 1.4301
stainless steel, stainless, 1.4308, dull blasted (NI) or
Aluminum, plastic coated, black, RAL 9005, textured finish (SW)
Clamping bores machined
sliding insert: plastic (PA / PTFE)
screw DIN 912 stainless steel 1.4301
hex nuts DIN 985, stainless steel 1.4301
Features:
stainless steel, stainless, 1.4308, dull blasted or
Aluminum, plastic coated, black, textured finish
Clamping bores machined
sliding insert: plastic (PA / PTFE)
cap screws DIN 912, stainless steel 1.4301
hex nuts DIN 985, stainless steel 1.4301
stainless steel, stainless, 1.4308, dull blasted or
Aluminum, plastic coated, black, textured finish
Clamping bores machined
sliding insert: plastic (PA / PTFE)
cap screws DIN 912, stainless steel 1.4301
hex nuts DIN 985, stainless steel 1.4301
Technical data:
Rail profile and balls: stainless steel, rustproof, 1.4301
Ball cage, outer rail: plastic
Ball cage, inner rail: stainless steel, rustproof, 1.4301
Rubber stop and separating function: plastic / Elastomer
Lubricant: Roller bearing grease, FDA-compliant
Operating temperature -20 °C to 100 °C
Rail profile and balls: stainless steel, rustproof, 1.4301
Ball cage, outer rail: plastic
Ball cage, inner rail: stainless steel, rustproof, 1.4301
Rubber stop and separating function: plastic / Elastomer
Lubricant: Roller bearing grease, FDA-compliant
Operating temperature -20 °C to 100 °C
Eyebolt with long thread, design selectable
Technical data:
Stainless steel, 1.4308, matt blasted or
Aluminum, plastic-coated, black, textured matt
Guide bore machined
Sliding insert: plastic (PA / PTFE )
Cylinder screws DIN 912, stainless steel, 1.4301
Hexagon nuts DIN 985, stainless steel, 1.4301
Stainless steel, 1.4308, matt blasted or
Aluminum, plastic-coated, black, textured matt
Guide bore machined
Sliding insert: plastic (PA / PTFE )
Cylinder screws DIN 912, stainless steel, 1.4301
Hexagon nuts DIN 985, stainless steel, 1.4301
Technical data:
Stainless steel, 1.4308, matt blasted or
Aluminum, plastic-coated, black, RAL 9005, textured matt
Guide / clamping bores machined
Sliding insert Plastic (PA / PTFE)
Cylinder screws DIN 912, stainless steel, 1.4301
Hexagon nuts DIN 985, stainless steel, 1.4301
Stainless steel, 1.4308, matt blasted or
Aluminum, plastic-coated, black, RAL 9005, textured matt
Guide / clamping bores machined
Sliding insert Plastic (PA / PTFE)
Cylinder screws DIN 912, stainless steel, 1.4301
Hexagon nuts DIN 985, stainless steel, 1.4301
. Features: Replace
arresting GN200 and simplify complex partial and indexing devices, such as shift lever, latches, index pins and other safety elements
Material:
- Steel
or
- stainless steel (NI), Material No. 1.4305
versions:
Type A: knob without scale (with steel variant: burnished)
Type AS: knob scale engraved with laser precision, reference line on locking (for steel version: satin chrome and black deposed)
form B: lever with one lever, bürniert (only in steel version available)
form C: Rocker with two adjustment levers, burnished (available only in steel design)
keyway P9 DIN 6885:
sheet 1 for bore K10
sheet 2 for drilling> K10
Fixed cylindrical handles GN539 (plastic, thermoplastic black , shiny) (only form B and C)
arresting GN200 and simplify complex partial and indexing devices, such as shift lever, latches, index pins and other safety elements
Material:
- Steel
or
- stainless steel (NI), Material No. 1.4305
versions:
Type A: knob without scale (with steel variant: burnished)
Type AS: knob scale engraved with laser precision, reference line on locking (for steel version: satin chrome and black deposed)
form B: lever with one lever, bürniert (only in steel version available)
form C: Rocker with two adjustment levers, burnished (available only in steel design)
keyway P9 DIN 6885:
sheet 1 for bore K10
sheet 2 for drilling> K10
Fixed cylindrical handles GN539 (plastic, thermoplastic black , shiny) (only form B and C)
In stock
Technical data:
Versions:
- cast steel
- precision cast stainless steel (NI), rustproof, 1.4308, deburred
clamping surface: machined
Versions:
- cast steel
- precision cast stainless steel (NI), rustproof, 1.4308, deburred
clamping surface: machined
Features:
adjusting plates GN 2277.1 are used in combination with circular bubbles GN 2277, Form A
Consisting of:. Stainless steel, Material No. 1.4305
adjusting plates GN 2277.1 are used in combination with circular bubbles GN 2277, Form A
Consisting of:. Stainless steel, Material No. 1.4305
By offset by 120 ° are arranged fixing holes, the circular bubbles and the mounting plate may be aligned to the mounting surface.
An alignment ball on the underside of adjustment plate acts as a tilting point.
Technical data:
Running rail / running rail:
Heat-treated steel
- zinc-plated, blue passivated
- raceways hardened
Balls: roller bearing steel, hardened
Ball cage: Steel, zinc-plated
Track connection
- Binding rivets, stainless steel (h1 = 28, 35)
- Screws, steel, zinc-plated (h1 = 43)
Running rail / running rail:
Heat-treated steel
- zinc-plated, blue passivated
- raceways hardened
Balls: roller bearing steel, hardened
Ball cage: Steel, zinc-plated
Track connection
- Binding rivets, stainless steel (h1 = 28, 35)
- Screws, steel, zinc-plated (h1 = 43)
In stock
Spring bolt, design selectable
Technical data:
Housing: Steel, plastic-coated, black, textured matt
Shaft: Stainless steel, rustproof, 1.4305, matt blasted
Wearing parts: Steel, hardened
Switch knob: GN719.1, Plastic, Duroplast, Black, Glossy
Housing: Steel, plastic-coated, black, textured matt
Shaft: Stainless steel, rustproof, 1.4305, matt blasted
Wearing parts: Steel, hardened
Switch knob: GN719.1, Plastic, Duroplast, Black, Glossy
In stock
Features:
Plastic, Duroplast (PF)
temperature resistant up to 110 ° C
black, shiny
axle: stainless steel, Material No. 1.4305, dull blasted
Plastic, Duroplast (PF)
temperature resistant up to 110 ° C
black, shiny
axle: stainless steel, Material No. 1.4305, dull blasted
Technical data:
Guide tube:
Tube DIN 2391, steel, chrome-plated (SCR) or
Tube DIN 2462, stainless steel, 1.4301 (NI) <
>
Shaft: Steel or stainless steel with ball bearings
End plug: Plastic
Guide tube:
Tube DIN 2391, steel, chrome-plated (SCR) or
Tube DIN 2462, stainless steel, 1.4301 (NI) <
>
Shaft: Steel or stainless steel with ball bearings
End plug: Plastic
In stock
Weld-on handle, design selectable
Features:
stainless steel
1.4301
matt blasted
tag (Form M) engraved with laser precision
Stainless steel screw DIN 916 with internal hexagon and serrated point
stainless steel
1.4301
matt blasted
tag (Form M) engraved with laser precision
Stainless steel screw DIN 916 with internal hexagon and serrated point
Features:
stainless steel 1.4301, dull blasted
scale (Type S) and arrow (Type A) engraved with laser precision
Stainless steel screw DIN 916 with internal hexagon and serrated point
stainless steel 1.4301, dull blasted
scale (Type S) and arrow (Type A) engraved with laser precision
Stainless steel screw DIN 916 with internal hexagon and serrated point
In stock
Features:
Variant SBL:
Housing: sheet steel, zinc plated, blue passivated
Ball: steel, bare
variant SKU:
housing: sheet steel, zinc plated, blue passivated
ball: plastic (polyacetal POM)
variant SNI:
housing: sheet steel, zinc plated, blue passivated
ball: stainless steel, stainless, 1.4034
Variant SBL:
Housing: sheet steel, zinc plated, blue passivated
Ball: steel, bare
variant SKU:
housing: sheet steel, zinc plated, blue passivated
ball: plastic (polyacetal POM)
variant SNI:
housing: sheet steel, zinc plated, blue passivated
ball: stainless steel, stainless, 1.4034
variant NNI:
housing: stainless steel sheet 1.4301
ball: stainless steel, stainless, 1.4034
Features:
SBL:
Housing: steel, turned, zinc-plated, blue passivated
Ball: steel, bare
SNI:
housing: steel, turned, zinc-plated, blue passivated
ball: stainless steel, stainless, 1.4034
NNI:
housing: stainless steel, 1.4028 and Material No. 1.4305 (only size 15)
ball: stainless steel, stainless, 1.4034
SBL:
Housing: steel, turned, zinc-plated, blue passivated
Ball: steel, bare
SNI:
housing: steel, turned, zinc-plated, blue passivated
ball: stainless steel, stainless, 1.4034
NNI:
housing: stainless steel, 1.4028 and Material No. 1.4305 (only size 15)
ball: stainless steel, stainless, 1.4034
Features:
Form A:. Spring steel, stainless steel
With claws spring washers GN 509.3, Form A ball rolls can be mounted on the installation side and dismantled
Shape B: spring steel, galvanized
Pink rings GN 509.3, form B are mounted from the back.
fixed ball transfer units are no longer removable. Regarding the plate thickness is not limited.
Form A:. Spring steel, stainless steel
With claws spring washers GN 509.3, Form A ball rolls can be mounted on the installation side and dismantled
Shape B: spring steel, galvanized
Pink rings GN 509.3, form B are mounted from the back.
fixed ball transfer units are no longer removable. Regarding the plate thickness is not limited.
Technical data:
Plastic, thermoplastic (PP), FDA certified, reinforced, impact-resistant, temperature-resistant up to 80 °C, black, matt
Reversible handles: plastic, thermoplastic (PA) , FDA certified, black, matt, rotatable
folding mechanism, hub bushing and cover: stainless steel, rustproof 1.4301hub cover: self-adhesive
Plastic, thermoplastic (PP), FDA certified, reinforced, impact-resistant, temperature-resistant up to 80 °C, black, matt
Reversible handles: plastic, thermoplastic (PA) , FDA certified, black, matt, rotatable
folding mechanism, hub bushing and cover: stainless steel, rustproof 1.4301hub cover: self-adhesive
Technical data:
Plastic, thermoplastic (polyamide PA)
- glass fiber reinforced
- temperature resistant up to 100 °C
- black, matt
bushing: steel, burnished or stainless steel, rustproof, 1.4305
Threaded pin: DIN 916 with hexagon socket and cup point, steel or stainless steel, rustproof, 1.4301
Plastic, thermoplastic (polyamide PA)
- glass fiber reinforced
- temperature resistant up to 100 °C
- black, matt
bushing: steel, burnished or stainless steel, rustproof, 1.4305
Threaded pin: DIN 916 with hexagon socket and cup point, steel or stainless steel, rustproof, 1.4301
In stock
Latching bolt, exemplary selectable
Spring pressure piece, material and size selectable
In stock
Spring plunger with ball, design selectable
In stock
Indexing plunger, design selectable GN617
Technical data:
Body:
plastic, thermoplastic (polypropylene PP)
sheathed with a soft elastomer (TPE)
70 Shore A
temperature 80 ° C
black-gray, matt RAL 7021
Softline lagging:
chemically bonded to the plastic core
bush:
stainless steel, material No. 1.4305
Color of the cap:
- black-gray, RAL 7021, matt
- orange, RAL 2004, matt
- gray, RAL 7035, matt
- yellow, RAL 1021, matt
- blue, RAL 5024, matt
- red, RAL 3000, matt
Body:
plastic, thermoplastic (polypropylene PP)
sheathed with a soft elastomer (TPE)
70 Shore A
temperature 80 ° C
black-gray, matt RAL 7021
Softline lagging:
chemically bonded to the plastic core
bush:
stainless steel, material No. 1.4305
Color of the cap:
- black-gray, RAL 7021, matt
- orange, RAL 2004, matt
- gray, RAL 7035, matt
- yellow, RAL 1021, matt
- blue, RAL 5024, matt
- red, RAL 3000, matt
In stock
Cross handle screw, Type selectable
Flat knurled screw, design selectable
Knurled screw with undercut, design selectable
Features:.
knobs GN 676.5 are used as control panel for pulling or pushing movements
The version with knurled (Form B), can be used as shapely knurled nut with blind hole thread. "
knobs GN 676.5 are used as control panel for pulling or pushing movements
The version with knurled (Form B), can be used as shapely knurled nut with blind hole thread. "
stainless steel, Material No. 1.4305, matt, blasted
Best sellers
Galvanized steel, blue passivated
In stock
Sintered steel (Distaloy AB) black, dampfoxidiert. Cap screw DIN 912, steel, phosphated.
In stock
ST steel, sintered steel (Distaloy AB) black, dampfoxidiert
Adjustable hand Lever | Zinc Die Cast
plastic coated
Black RAL 9005, textured finish
Screw stud and retaining screw
stainless
Material No. 1.4305
Adjustable hand Lever | Zinc Die Cast
plastic coated
Black RAL 9005, textured finish
Screw stud and retaining screw
stainless
Material No. 1.4305
In stock
Stainless Steel NI sintered steel stainless 1.4404
Cap screw DIN 912 Stainless steel 1.4301
Stainless Steel NI sintered steel stainless 1.4404
Cap screw DIN 912 Stainless steel 1.4301
In stock
Stainless Steel NI sintered steel stainless 1.4404
Damping disk:
Elastomer (PUR)
70 Shore A
temperature 80 ° C
transparent
Head screw to DIN 912:
stainless
1.4301
Damping disk:
Elastomer (PUR)
70 Shore A
temperature 80 ° C
transparent
Head screw to DIN 912:
stainless
1.4301
Stainless steel sintered stainless 1.4404
Head screw to DIN 912:
stainless
1.4301
Head screw to DIN 912:
stainless
1.4301
In stock
Stainless steel sintered stainless 1.4404
Head screw to DIN 912:
stainless
1.4301
Head screw to DIN 912:
stainless
1.4301
Stainless steel sintered stainless 1.4404
Damping disk:
Elastomer (PUR)
70 Shore A
temperature 80 ° C
transparent
Head screw to DIN 912:
stainless
1.4301
sintered steel stainless 1.4404
Damping disk:
Elastomer (PUR)
70 Shore A
temperature 80 ° C
transparent
Head screw to DIN 912:
stainless
1.4301
sintered steel stainless 1.4404
In stock
Pressure screw with rubber buffer, design selectable
Items 1 - 50 of 73