Stainless steel
Items 1 - 50 of 73
In stock
Weld-on handle, design selectable
Vertical clamp, design selectable
Technical data:
Stainless steel, 1.4308, matt blasted or
Aluminum, plastic-coated, black, textured matt
Guide bore machined
Sliding insert: plastic (PA / PTFE )
Cylinder screws DIN 912, stainless steel, 1.4301
Hexagon nuts DIN 985, stainless steel, 1.4301
Stainless steel, 1.4308, matt blasted or
Aluminum, plastic-coated, black, textured matt
Guide bore machined
Sliding insert: plastic (PA / PTFE )
Cylinder screws DIN 912, stainless steel, 1.4301
Hexagon nuts DIN 985, stainless steel, 1.4301
Best sellers
Thread insert type 309, thread and material selectable
Best sellers
Thread insert type 307/308, thread, length and material selectable
Best sellers
Thread insert type 302, thread and material selectable
In stock
Thread insert H-Coil, thread and length selectable
Features:
SBL:
Housing: steel, turned, zinc-plated, blue passivated
Ball: steel, bare
SNI:
housing: steel, turned, zinc-plated, blue passivated
ball: stainless steel, stainless, 1.4034
NNI:
housing: stainless steel, 1.4028 and Material No. 1.4305 (only size 15)
ball: stainless steel, stainless, 1.4034
SBL:
Housing: steel, turned, zinc-plated, blue passivated
Ball: steel, bare
SNI:
housing: steel, turned, zinc-plated, blue passivated
ball: stainless steel, stainless, 1.4034
NNI:
housing: stainless steel, 1.4028 and Material No. 1.4305 (only size 15)
ball: stainless steel, stainless, 1.4034
In stock
Features:
Variant SBL:
Housing: sheet steel, zinc plated, blue passivated
Ball: steel, bare
variant SKU:
housing: sheet steel, zinc plated, blue passivated
ball: plastic (polyacetal POM)
variant SNI:
housing: sheet steel, zinc plated, blue passivated
ball: stainless steel, stainless, 1.4034
Variant SBL:
Housing: sheet steel, zinc plated, blue passivated
Ball: steel, bare
variant SKU:
housing: sheet steel, zinc plated, blue passivated
ball: plastic (polyacetal POM)
variant SNI:
housing: sheet steel, zinc plated, blue passivated
ball: stainless steel, stainless, 1.4034
variant NNI:
housing: stainless steel sheet 1.4301
ball: stainless steel, stainless, 1.4034
Technical data:
Running rail / running rail:
Heat-treated steel
- zinc-plated, blue passivated
- raceways hardened
Balls: roller bearing steel, hardened
Ball cage: Steel, zinc-plated
Track connection
- Binding rivets, stainless steel (h1 = 28, 35)
- Screws, steel, zinc-plated (h1 = 43)
Running rail / running rail:
Heat-treated steel
- zinc-plated, blue passivated
- raceways hardened
Balls: roller bearing steel, hardened
Ball cage: Steel, zinc-plated
Track connection
- Binding rivets, stainless steel (h1 = 28, 35)
- Screws, steel, zinc-plated (h1 = 43)
In stock
Features:
Plastic, Duroplast (PF)
temperature resistant up to 110 ° C
black, shiny
axle: stainless steel, Material No. 1.4305, dull blasted
Plastic, Duroplast (PF)
temperature resistant up to 110 ° C
black, shiny
axle: stainless steel, Material No. 1.4305, dull blasted
Features:
stainless steel
- Eccentrical: Material No. 1.4305, Electroless nickel
- Bolt and washer: stainless, 1.4542, tempered
- Ball control: non-corrosive, 1.4305, dull blasted
ball knob DIN 319
plastic
thermoset
black, shiny
In connection with clamping bars recommended the use of ball screws GN 605 with flattened ball.
stainless steel
- Eccentrical: Material No. 1.4305, Electroless nickel
- Bolt and washer: stainless, 1.4542, tempered
- Ball control: non-corrosive, 1.4305, dull blasted
ball knob DIN 319
plastic
thermoset
black, shiny
In connection with clamping bars recommended the use of ball screws GN 605 with flattened ball.
Features:
stainless steel
1.4301
matt blasted
tag (Form M) engraved with laser precision
Stainless steel screw DIN 916 with internal hexagon and serrated point
stainless steel
1.4301
matt blasted
tag (Form M) engraved with laser precision
Stainless steel screw DIN 916 with internal hexagon and serrated point
Features:
stainless steel 1.4301, dull blasted
scale (Type S) and arrow (Type A) engraved with laser precision
Stainless steel screw DIN 916 with internal hexagon and serrated point
stainless steel 1.4301, dull blasted
scale (Type S) and arrow (Type A) engraved with laser precision
Stainless steel screw DIN 916 with internal hexagon and serrated point
Features:.
knobs GN 676.5 are used as control panel for pulling or pushing movements
The version with knurled (Form B), can be used as shapely knurled nut with blind hole thread. "
knobs GN 676.5 are used as control panel for pulling or pushing movements
The version with knurled (Form B), can be used as shapely knurled nut with blind hole thread. "
stainless steel, Material No. 1.4305, matt, blasted
Features:
stainless steel
- Eccentrical: Material No. 1.4305, Electroless nickel
- Bolt and washer: stainless, 1.4542, tempered
- Ball control: non-corrosive, 1.4305, dull blasted
ball knob DIN 319
plastic
thermoset
black, shiny
stainless steel
- Eccentrical: Material No. 1.4305, Electroless nickel
- Bolt and washer: stainless, 1.4542, tempered
- Ball control: non-corrosive, 1.4305, dull blasted
ball knob DIN 319
plastic
thermoset
black, shiny
Features:
Leverage:
Stainless steel (investment casting), stainless 1.4308
axis tension nut
adjusting nut and screw (only type A)
Leverage:
Stainless steel (investment casting), stainless 1.4308
axis tension nut
adjusting nut and screw (only type A)
stainless steel, stainless 1.4305
Contact plate:
Type A:
plastic (polyacetal POM), glass fiber reinforced
form B:
plastic (polyamide PA) glass fiber reinforced,
In stock
Features:
Leverage:
Stainless steel (investment casting), stainless 1.4308
axis lag screw
adjusting nut and screw (only type A)
Leverage:
Stainless steel (investment casting), stainless 1.4308
axis lag screw
adjusting nut and screw (only type A)
stainless steel, stainless 1.4305
Contact plate
stainless steel, stainless 1.4057, hardened
Stainless steel sintered stainless 1.4404
Damping disk:
Elastomer (PUR)
70 Shore A
temperature 80 ° C
transparent
Head screw to DIN 912:
stainless
1.4301
sintered steel stainless 1.4404
Damping disk:
Elastomer (PUR)
70 Shore A
temperature 80 ° C
transparent
Head screw to DIN 912:
stainless
1.4301
sintered steel stainless 1.4404
Stainless steel sintered stainless 1.4404
Head screw to DIN 912:
stainless
1.4301
Head screw to DIN 912:
stainless
1.4301
In stock
Stainless steel sintered stainless 1.4404
Head screw to DIN 912:
stainless
1.4301
Head screw to DIN 912:
stainless
1.4301
In stock
Stainless Steel NI sintered steel stainless 1.4404
Damping disk:
Elastomer (PUR)
70 Shore A
temperature 80 ° C
transparent
Head screw to DIN 912:
stainless
1.4301
Damping disk:
Elastomer (PUR)
70 Shore A
temperature 80 ° C
transparent
Head screw to DIN 912:
stainless
1.4301
In stock
Stainless Steel NI sintered steel stainless 1.4404
Cap screw DIN 912 Stainless steel 1.4301
Stainless Steel NI sintered steel stainless 1.4404
Cap screw DIN 912 Stainless steel 1.4301
Features:
stainless steel
- Eccentrical: Material No. 1.4305, Electroless nickel
- Bolt and washer: stainless, 1.4542, tempered
- Ball control: non-corrosive, 1.4305, dull blasted
ball knob DIN 319
plastic
thermoset
black, shiny
In connection with clamping bars recommended the use of ball screws GN 605 with flattened ball.
stainless steel
- Eccentrical: Material No. 1.4305, Electroless nickel
- Bolt and washer: stainless, 1.4542, tempered
- Ball control: non-corrosive, 1.4305, dull blasted
ball knob DIN 319
plastic
thermoset
black, shiny
In connection with clamping bars recommended the use of ball screws GN 605 with flattened ball.
Features:
stainless steel 1.4301, blasted
axle
Stainless steel 1.4021, heat-treated
Seeger ring:
Stainless Steel 1.4310
plastic cap:
red
oil resistant
temperature resistant up to 60 ° C
advantage: tightening action in any angular position equal and self-locking
The measure. b2 is tuned to the 444.2 head height of bolts DIN 444 and eye nuts GN.
stainless steel 1.4301, blasted
axle
Stainless steel 1.4021, heat-treated
Seeger ring:
Stainless Steel 1.4310
plastic cap:
red
oil resistant
temperature resistant up to 60 ° C
advantage: tightening action in any angular position equal and self-locking
The measure. b2 is tuned to the 444.2 head height of bolts DIN 444 and eye nuts GN.
Features:
adjusting plates GN 2277.1 are used in combination with circular bubbles GN 2277, Form A
Consisting of:. Stainless steel, Material No. 1.4305
adjusting plates GN 2277.1 are used in combination with circular bubbles GN 2277, Form A
Consisting of:. Stainless steel, Material No. 1.4305
By offset by 120 ° are arranged fixing holes, the circular bubbles and the mounting plate may be aligned to the mounting surface.
An alignment ball on the underside of adjustment plate acts as a tilting point.
Spring pressure piece, material and size selectable
Features:
Form A:. Spring steel, stainless steel
With claws spring washers GN 509.3, Form A ball rolls can be mounted on the installation side and dismantled
Shape B: spring steel, galvanized
Pink rings GN 509.3, form B are mounted from the back.
fixed ball transfer units are no longer removable. Regarding the plate thickness is not limited.
Form A:. Spring steel, stainless steel
With claws spring washers GN 509.3, Form A ball rolls can be mounted on the installation side and dismantled
Shape B: spring steel, galvanized
Pink rings GN 509.3, form B are mounted from the back.
fixed ball transfer units are no longer removable. Regarding the plate thickness is not limited.
In stock
Spring plunger with ball, design selectable
In stock
Spring bolt, design selectable
Technical data:
Body:
plastic, thermoplastic (polypropylene PP)
sheathed with a soft elastomer (TPE)
70 Shore A
temperature 80 ° C
black-gray, matt RAL 7021
Softline lagging:
chemically bonded to the plastic core
bush:
stainless steel, material No. 1.4305
Color of the cap:
- black-gray, RAL 7021, matt
- orange, RAL 2004, matt
- gray, RAL 7035, matt
- yellow, RAL 1021, matt
- blue, RAL 5024, matt
- red, RAL 3000, matt
Body:
plastic, thermoplastic (polypropylene PP)
sheathed with a soft elastomer (TPE)
70 Shore A
temperature 80 ° C
black-gray, matt RAL 7021
Softline lagging:
chemically bonded to the plastic core
bush:
stainless steel, material No. 1.4305
Color of the cap:
- black-gray, RAL 7021, matt
- orange, RAL 2004, matt
- gray, RAL 7035, matt
- yellow, RAL 1021, matt
- blue, RAL 5024, matt
- red, RAL 3000, matt
In stock
Features:
Stainless Steel (NI):
- thickness 0.6 mm
- scale etched
plastic (KUS):
- thickness 0.3 mm
- silver deposited
- scale printed
forms:
- S - digits arranged perpendicularly
digit sequences:
U - zero point below
M - zero centrally
O - zero point above
- W - figures arranged horizontally
digit sequences:
L - zero left
M - zero centrally
R - zero right
Stainless Steel (NI):
- thickness 0.6 mm
- scale etched
plastic (KUS):
- thickness 0.3 mm
- silver deposited
- scale printed
forms:
- S - digits arranged perpendicularly
digit sequences:
U - zero point below
M - zero centrally
O - zero point above
- W - figures arranged horizontally
digit sequences:
L - zero left
M - zero centrally
R - zero right
Plastic (KT)
Thermoplastic (Polyamide PA): thermally stable up to 90 ° C
black, matt
Stainless Steel (NI)
Material No. 1.4305 finely turned, download blank
axle
stainless
Material No. 1.4305
,
Thermoplastic (Polyamide PA): thermally stable up to 90 ° C
black, matt
Stainless Steel (NI)
Material No. 1.4305 finely turned, download blank
axle
stainless
Material No. 1.4305
,
Technical data:
Turntable: stainless steel, 1.4305
Other components: steel (partially galvanized) or brass
Knob: aluminum, black anodized
Turntable: stainless steel, 1.4305
Other components: steel (partially galvanized) or brass
Knob: aluminum, black anodized
versions:
Stainless Steel (NI)
- thickness 0.6 mm
- scale etched
plastic (KUS)
- Strength 0 , 3mm
- silver deposited
- printed scale
Stainless Steel (NI)
- thickness 0.6 mm
- scale etched
plastic (KUS)
- Strength 0 , 3mm
- silver deposited
- printed scale
In stock
Features:
Material:
Steel, blackened or
Stainless Steel (NI), non-corrosive, 1.4307
Material:
Steel, blackened or
Stainless Steel (NI), non-corrosive, 1.4307
Technical data:
Housing: Steel, plastic-coated, black, textured matt
Shaft: Stainless steel, rustproof, 1.4305, matt blasted
Wearing parts: Steel, hardened
Switch knob: GN719.1, Plastic, Duroplast, Black, Glossy
Housing: Steel, plastic-coated, black, textured matt
Shaft: Stainless steel, rustproof, 1.4305, matt blasted
Wearing parts: Steel, hardened
Switch knob: GN719.1, Plastic, Duroplast, Black, Glossy
In stock
Pressure screw with rubber buffer, design selectable
In stock
Features:
Leverage:
plastic (Polyamide PA)
glass fiber reinforced
temperature resistant up to 80 ° C
black, matt
Connector:
plastic (polyacetal POM)
threaded socket or screw
stainless steel
Contact plate / collar:
plastic (polyamide PA-HP)
black, matt
axis:
stainless steel
Leverage:
plastic (Polyamide PA)
glass fiber reinforced
temperature resistant up to 80 ° C
black, matt
Connector:
plastic (polyacetal POM)
threaded socket or screw
stainless steel
Contact plate / collar:
plastic (polyamide PA-HP)
black, matt
axis:
stainless steel
Technical data:
Rail profile and balls: stainless steel, rustproof, 1.4301
Ball cage, outer rail: plastic
Ball cage, inner rail: stainless steel, rustproof, 1.4301
Rubber stop and separating function: plastic / Elastomer
Lubricant: Roller bearing grease, FDA-compliant
Operating temperature -20 °C to 100 °C
Rail profile and balls: stainless steel, rustproof, 1.4301
Ball cage, outer rail: plastic
Ball cage, inner rail: stainless steel, rustproof, 1.4301
Rubber stop and separating function: plastic / Elastomer
Lubricant: Roller bearing grease, FDA-compliant
Operating temperature -20 °C to 100 °C
In stock
Mini grid, design selectable
. Features: Replace
arresting GN200 and simplify complex partial and indexing devices, such as shift lever, latches, index pins and other safety elements
Material:
- Steel
or
- stainless steel (NI), Material No. 1.4305
versions:
Type A: knob without scale (with steel variant: burnished)
Type AS: knob scale engraved with laser precision, reference line on locking (for steel version: satin chrome and black deposed)
form B: lever with one lever, bürniert (only in steel version available)
form C: Rocker with two adjustment levers, burnished (available only in steel design)
keyway P9 DIN 6885:
sheet 1 for bore K10
sheet 2 for drilling> K10
Fixed cylindrical handles GN539 (plastic, thermoplastic black , shiny) (only form B and C)
arresting GN200 and simplify complex partial and indexing devices, such as shift lever, latches, index pins and other safety elements
Material:
- Steel
or
- stainless steel (NI), Material No. 1.4305
versions:
Type A: knob without scale (with steel variant: burnished)
Type AS: knob scale engraved with laser precision, reference line on locking (for steel version: satin chrome and black deposed)
form B: lever with one lever, bürniert (only in steel version available)
form C: Rocker with two adjustment levers, burnished (available only in steel design)
keyway P9 DIN 6885:
sheet 1 for bore K10
sheet 2 for drilling> K10
Fixed cylindrical handles GN539 (plastic, thermoplastic black , shiny) (only form B and C)
In stock
Latching bolt, exemplary selectable
Knurled screw with undercut, design selectable
Knurled nut, design selectable
In stock
Indexing plunger, design selectable GN617
In stock
Horizontal clamp, design selectable
In stock
High knurled screw, design selectable
Flat knurled screw, design selectable
Items 1 - 50 of 73