Aluminum
Crank body: aluminium, plastic-coated
Colours:
- black, RAL 9005, textured matt
- silver, RAL 9006, textured matt
Flat side of Machined hub
Cover: plastic, light gray
Reversible handle GN 798.5: plastic, thermoplastic, black, matt
Reversible mechanism: stainless steel
- axle parts: rustproof, 1.4305
- attachment: sintered steel, 1.4404 <
>
Crank body: aluminium, plastic-coated
Colours:
- black, RAL 9005, textured matt
- silver, RAL 9006, textured matt
Flat side of Machined hub
Cover: plastic, light gray
Foldable handles GN798.3: plastic, thermoplastic, black, matt
Foldable mechanism: steel, burnished
Aluminum
versions:
- blank, vibration, separation seam invisible
or
- plastic coated
black, RAL 9005, textured finish or .
silver, RAL 9006, textured finish
Aluminum (AL)
- recessed arrow, that is - natural anodised
- printed in black
eloxalfarbig
print resistant to mild acids and alkalis as well as solvents transient exposure.
Aluminium, natural anodised
Versions:
- with marking (A), black
- neutral (B)
Self-adhesive
aluminum and anodized black
Stainless steel screw DIN 916 with internal hexagon and serrated
Lid: plastic, light gray
Die-cast aluminium, plastic-coated, black, RAL 9005, textured matt
Pressure screws: stainless steel
The GN298 housings for angle/T gears are used in conjunction with bevel gears GN297 and linear/transmission units.
Crank body
- Aluminium, plastic-coated, black, textured matt
- Flat side of the hub machined
Reversible handles GN598.3
Aluminum
- Hub machined
- Wheel rim turned and polished on all sides
- Unmachined surfaces blasted
Concentricity and axial runout of the wheel rim < 0,4
Foldable handles GN798.7: Plastic, thermoplastic, black, matt, rotatable
Foldable mechanism:
- Axle part: Steel 1.0718, burnished
- Attachment: Sintered steel, burnished
Aluminum
- Hub machined
- Wheel rim turned and polished on all sides
- Unmachined surfaces blasted
Concentricity and axial runout of the wheel rim < 0,4
Foldable handles GN798.3: Plastic, thermoplastic, black, matt, rotatable
Foldable mechanism: Steel, burnished
Aluminum (AL)
- natural anodised
- cut out numbers and scaling, that is - printed in black
eloxalfarbig
imprint resist mild acids and alkalis, as well as to solvents transient exposure
forms.
- S - arranged digits perpendicular
digit sequences:
U - zero point below
M - zero centrally
O - zero
above - W - figures arranged horizontally
digit sequences:
L - zero left
M - zero centrally
R - zero right
aluminum, plastic-coated, black, RAL 9005, textured finish
Clamping bores unprocessed
Fastening / transmission elements
screw DIN 912
hex nuts DIN 985
Locating Pins, drivers stainless steel, stainless steel 1.4301
Aluminum: black anodized
Cover: plastic, light gray
Collet / hexagon nut: brass
Stainless steel threaded pin DIN 916 with hexagon socket and cup point
Turnable cylinder knobs GN599.5: Plastic, thermoplastic, black, matt
Axle part: Stainless steel, 1.4305
matt, vibration (MT)
anodized black (ELS)
Cap screws DIN 912:
stainless
1.4301
Aluminium, anodised, natural color
Cylinder head screws DIN 912, stainless steel, rustproof
Aluminium, anodised, natural color
Cylinder head screws DIN 912, stainless steel, rustproof
Aluminum, anodized, natural color
Set screws DIN 913, steel, zinc-plated
Cylinder screws DIN 912, stainless steel, rustproof
Bezugsflansche GN 723.3 are used in connection with knobs GN 723.4
Aluminum: anodized, black
Reference arrow: white, engraved with laser precision
clamping ring: rubber
friction ring: polyamide (only type A)
Cast iron (GG)
- Hub machined
- Wheel rim turned and polished
or
Aluminum (AL)
-Hub machined
-wheel rim turned and polished
-unprocessed surfaces blasted
Concentricity and axial run-out deviation of the wheel rim < 0,4
Versions:
Without handle (A)
With fixed ball handles DIN39 (F)
With rotatable palm grips DIN98 (D)
Housing: Aluminum
- natural color anodised (ALN)
- anodized black (ALS)
dragonflies use:
Glass plastic body
filling: colorless transparent (K)
potting: mineral
Features:
Housing: Aluminum
- natural color anodised (ALN)
- black anodized (ALS)
dragonflies use Glass plastic body
filling: colorless transparent (K)
potting compound: mineral
sensitivity (Sens): 30 angular minutes, per 2mm Blasenweg
mounting flange for mounting (form A) or involved (form B)
Housing: Aluminum
- natural color anodised (ALN)
- anodized black (ALS)
dragonflies use:
Glass plastic body
filling: colorless transparent (K)
potting: mineral
forms:
A - with a smooth reference surface
the form A, we in particular then used when the dragonfly as a tool, for example, will provide several measuring points
B - with mounting thread
Sensitivity (Sens): 30 arc minutes per 2mm Blasenweg
Housing: Aluminum
- natural color anodised (ALN)
- anodized black (ALS)
dragonflies use:
Glass plastic body
filling: colorless transparent (K)
potting compound: mineral
The housing is provided at its lower diameter d3 with grooves. A fixation for. As by bonding is facilitated by
sensitivity (Sens). 30 angular minutes per 2mm Blasenweg
Thermoplastic (Polyamide PA): thermally stable up to 90 ° C
black, matt
Aluminum (AL)
polished
axle
steel zinc plated, blue passivated
aluminum, anodized black
scale ring: plastic, black, pressed
arrow (Type A) and scale (Type S; 0th ..9, 20 subdivisions), white, engraved with laser precision
lid: plastic, light gray
collet / hexagon nut: brass
stainless steel screw DIN 916 with internal hexagon and serrated point
aluminum and anodized black
Lid: plastic, light gray
Collet / hexagon nut: Brass
Stainless steel screw DIN 916 with internal hexagon and serrated point
aluminum and anodized black
scale (Type S 0 ... 9, 20 subdivisions) and arrow (Type A), white, engraved with laser precision.
lid: plastic, light gray
collet / hexagon nut: brass
stainless steel screw DIN 916 with internal hexagon and serrated.
attachment and socket:
steel, blackened
clamping mechanism:
steel, hardened and ground
scale ring and Adjustment:
aluminum, black anodized
scale / arrow (Type A, KS, S)
engraved with laser precision
centrally aligned between two mounting holes
Body: steel, chrome-plated
Spindle: steel, bare
knob: aluminum, anodized, black
hex bolt: steel, zinc plated, blue passivated (only form S1)
scales: engraved with laser precision, absolutely resistant to abrasion
lid: plastic, light gray
aluminum, anodized, natural color
scale (Type S 0 ... 9, 20 ticks) and arrow (Type M) engraved with laser precision
stainless steel screw DIN 916 with internal hexagon and serrated.
Aluminium, anodised, natural color
Cylinder screws DIN 912: stainless steel, rustproof
Turntable: stainless steel, 1.4305
Other components: steel (partially galvanized) or brass
Knob: aluminum, black anodized
plastic, thermoplastic (Polyamide PA)
black, matt
platelets
Aluminum anodized, natural color
screw DIN 916 with internal hexagon and serrated point
matt, vibration (MT)
anodized black (ELS)
Cap screws DIN 912:
stainless
1.4301
aluminum, anodized black
wedge: Brass
Adjustable hand levers (Form H):
black, RAL 9005, textured finish
adjusting lever (form H): stainless steel, 1.4305
Allen-adjustment screw (Type S): stainless steel, 1.4305
the clamping element can be mounted so that the position of the clamping lever or the clamping screw is on the left or the right.
GN 711.1 reference arrows are available that can be attached to the periphery of the clamping element.
matt, vibration (MT)
anodized black (ELS)
matt, vibration (MT)
anodized black (ELS)
Cap screws DIN 912:
stainless
1.4301
Body:
- "ALS": aluminum, anodized black
viewing area: Glass
- Version "KT": plastic, white
viewing area: transparent
filling:
- colorless transparent (K)
- transparent green (G) (only in version KT)
sensitivity (Sens):
- 10 arc minutes per 2mm Blasenweg (version ALS)
- 40 arcmin per 2mm Blasenweg (version KT)
The level stakes are not aligned, d. H. an adjustment to the vertical position must by aligning the receiving component be guaranteed.
When running ALS reflection results from the black housing on the bubble edge, which improves the readability significantly.
The execution KT with contrast ring available within the vial housing (code 2), which ensures the same effect.
Alternatively, a corresponding improvement in contrast are also achieved by a dark wall of the mounting hole.
Adapter shaft: Steel, burnished
Torque support: Aluminum, black anodized
Adapter shaft: Steel, burnished
Torque support: Aluminum, black anodized
Adapter shaft: Steel, burnished
Torque support: Aluminum, bright, tumbled
Aluminium, anodised, natural color
Cylinder head screws DIN 912, stainless steel, rustproof
Body:
- aluminum (Form N)
- steel (Form R / Type S), plated and blue passivated
wheels:
- bearing steel, hardened ball bearing, sealed (2 RS), lifetime lubrication
wiper:
plastic, PUR, gray
steel core, galvanized
Fits running rail GN2422
Aluminum
anodized, black
Marking line white, engraved with laser precision
Stainless steel screw DIN 916 with internal hexagon and serrated point
Die-cast aluminium:
- Hub machined
- Wheel rim turned on all sides
- Wheel body completely plastic-coated
- Black, textured matt
Concentricity - and run-out deviation of the wheel rim under IT 12
Gear wheel: plastic (polyamide PA), glass fiber reinforced
Screw for anchor pin: steel, blued, injected
Rotatable cylinder handles GN 798 (plastic, thermoplastic, black, matt)
Aluminium:
- Hub machined
- Wheel rim turned on all sides
Concentricity and axial runout of the wheel rim < 0,4
Wheel body:
- Wheel rim highly polished
- unprocessed surfaces blasted
Rotatable cylindrical handles GN798:
- plastic, thermoplastic, black, matt
- axle part steel, zinc-plated, blue passivated
Aluminum
- Hub machined
- Wheel rim turned on all sides
Run-out and axial run-out deviation of the wheel rim < 0,4
Wheel body completely plastic-coated, black, textured matt <
> Rotating cylindrical handles GN 798 (plastic, thermoplastic, black, matt)
Disc handwheels GN323 have recessed grips on the back
Aluminium:
- Hub machined
- Wheel rim turned on all sides
Concentricity and axial run-out deviation of the wheel rim < 0,4
Wheel body: completely plastic-coated, black, textured matt
Revolving cylindrical handles GN 598: Steel, plastic-coated, black, textured matt
With plain bearing
Aluminium:
- Hub machined
- Wheel rim turned on all sides
Concentricity and axial runout of the wheel rim < 0,4
Wheel body:
- Wheel rim highly polished
- unmachined surfaces blasted
Rotatable cylindrical handles GN 598: Steel, plastic-coated, black, textured mattWith plain bearing
Aluminium:
- Hub machined
- Wheel rim turned on all sides
Concentricity and axial runout of the wheel rim < 0,4
Wheel body:
- Wheel rim highly polished
- unmachined surfaces blasted
Rotating cylindrical handles GN 598: Steel, plastic-coated, black, textured matt
With plain bearing
Aluminium:
- Hub machined
- Wheel rim turned on all sides
Concentricity and axial runout of the wheel rim < 0,4
Wheel body:
- Wheel rim highly polished
- unmachined surfaces blasted
Rotating cylindrical handles GN 598: Steel, plastic-coated, black, textured matt
With needle bearing
Aluminium:
- Hub machined
- Wheel rim turned on all sides
Concentricity and axial runout of the wheel rim < 0,4
Wheel body:
- Wheel rim highly polished
- unmachined surfaces blasted
Rotating cylindrical handles GN 598: Steel, plastic-coated, black, textured matt
With needle bearing
Wheel body made of aluminium:
- Wheel rim turned on all sides and highly polished
- Unprocessed surfaces plastic-coated, black, textured matt
Coupling elements: Steel, hardened, treads ground
Cover cap: Plastic, light gray
Rotatable cylindrical handles GN598: Steel, plastic-coated, black, textured matt
Shaft part steel: zinc-plated, blue passivated
With needle bearing
Aluminium:
- Hub machined
- Wheel rim turned on all sides
Run-out and axial run-out deviation of the wheel rim < 0,4
Wheel body completely plastic-coated, black, textured matt <
> Rotating cylindrical handles GN598: Steel, plastic-coated, black, textured matt
With needle bearing
Wheel body: Aluminum
- Wheel rim turned on all sides and highly polished
Coupling elements: Steel, nitrated
- Running surfaces ground or PTFE-coated
- Bearing flange burnished, fixed
Rotatable cylinder handles GN598: Plastic, Duroplast, black, glossy
Axle part: Steel, zinc-plated, blue passivated
Die-cast aluminum
- Machined hub
- Turned wheel rim
- Plastic-coated
Colours:
- Black, RAL 9005, textured matt
- silver, RAL 9006, textured matt
concentricity and axial run-out deviation of the wheel rim < 0,4
folding handles GN798.7: plastic, thermoplastic, black, matt
folding mechanism: steel, burnished
Die-cast aluminum
- Machined hub
- Turned wheel rim
- Plastic-coated
Colours:
- Black, RAL 9005, textured matt
- silver, RAL 9006, textured matt
concentricity and axial run-out deviation of the wheel rim < 0,4
folding handles GN798.7: plastic, thermoplastic, black, matt
folding mechanism: steel, burnished
aluminum, anodized natural color
arrow (Type A) and scale (Type S 0 ... 9, 40 or 100 divisions): black printed
scale rings GN 526.1 are supplied unassembled so separately; per ring 3 matching grooved pins are enclosed
To adjust the knob GN526. (sold separately; not included).
Adjustable hand Lever | Zinc Die Cast
plastic coated
Black RAL 9005, textured finish
Screw stud and retaining screw
stainless
Material No. 1.4305
black dampfoxidiert
Head screw to DIN 912
Steel, phosphated
Aluminium, anodised, natural color
Versions
- A - without mounting holes
or
- B - with mounting holes
With support profile GN646 .3 form B, the position and the edge distance of the drilling pattern is not defined.
Die-cast aluminium:
- machined hub
- wheel rim turned
- plastic-coated
colours:
- black, RAL 9005, textured matt
- silver, RAL 9006, textured matt
Concentricity and axial runout deviation of the wheel rim < 0,4
Reversible handles GN 798.3: Plastic, thermoplastic, black, matt
Reversible mechanism : Steel, blued
Die-cast aluminum
- Machined hub
- Turned wheel rim
- Plastic-coated
Colours:
- Black, RAL 9005, textured matt
- silver, RAL 9006, textured matt
concentricity and axial run-out deviation of the wheel rim < 0,4
folding handles GN798.3: plastic, thermoplastic, black, matt
folding mechanism: steel, burnished
stainless steel, stainless, 1.4308, dull blasted (NI) or
Aluminum, plastic coated, black, RAL 9005, textured finish (SW)
Clamping bores machined
sliding insert: plastic (PA / PTFE)
DIN 912 cylinder bolts, stainless steel, 1.4301
hex nuts DIN 985, stainless steel, 1.4301
stainless steel, stainless, 1.4308, dull blasted (NI) or
Aluminum, plastic coated, black, RAL 9005, textured finish (SW)
Clamping bores machined
sliding insert: plastic (PA / PTFE)
screw DIN 912 stainless steel 1.4301
hex nuts DIN 985, stainless steel 1.4301
Aluminium, plastic-coated, black, textured matt
Guide bore unprocessed
Cylinder screws DIN 912, stainless steel, 1.4301
Hexagon nuts DIN 985, stainless steel, 1.4304 <
>
stainless steel, stainless, 1.4308, dull blasted or
Aluminum, plastic coated, black, textured finish
Clamping bores machined
sliding insert: plastic (PA / PTFE)
cap screws DIN 912, stainless steel 1.4301
hex nuts DIN 985, stainless steel 1.4301
Stainless steel, 1.4308, matt blasted or
Aluminum, plastic-coated, black, textured matt
Guide bore machined
Sliding insert: plastic (PA / PTFE )
Cylinder screws DIN 912, stainless steel, 1.4301
Hexagon nuts DIN 985, stainless steel, 1.4301
Aluminium, plastic-coated, black, RAL 9005, textured matt
Square clamp, unprocessed
Cylinder screws DIN 912, stainless steel, 1.4301
Hexagon nuts DIN 985, stainless steel , 1.4301
aluminum, plastic-coated, black, RAL 9005, textured finish
Clamping bores unprocessed
Fastening / transmission elements:
screw DIN 912
hex nuts DIN 985
Locating Pins, driver
stainless steel, stainless steel 1.4301
Aluminium, plastic-coated, black, RAL 9005, textured matt
Guide bores machined
Sliding insert plastic (PA / PTFE)
Cylinder screws DIN 912, stainless steel , 1.4301
Hexagon nuts DIN 985, stainless steel, 1.4301
Aluminium, plastic-coated, black, RAL 9005, textured matt
Guide bores machined
Sliding insert plastic (PA / PTFE)
Cylinder screws DIN 912, stainless steel , 1.4301
Hexagon nuts DIN 985, stainless steel, 1.4301
Stainless steel, 1.4308, matt blasted or
Aluminum, plastic-coated, black, RAL 9005, textured matt
Guide / clamping bores machined
Sliding insert Plastic (PA / PTFE)
Cylinder screws DIN 912, stainless steel, 1.4301
Hexagon nuts DIN 985, stainless steel, 1.4301
Carriage / end plates, extruded aluminium, anodised, natural color
Guide shafts: stainless steel
Drive:
- Spindle / ball bearing, stainless steel, rustproof
- Spindle nut: plastic
Fastening screws: stainless steel, rustproof
Turning knob / scale ring: aluminum, black anodized
Aluminum: black anodized
Standard scale (code S): engraved
Cover: plastic, light gray
Collet (Z)/ hexagon nut (B /K): Brass
Turnable cylinder knobs GN599.5: Plastic, thermoplastic, black, matt
Axle part: Stainless steel, 1.4305