Aluminum
Turntable: stainless steel, 1.4305
Other components: steel (partially galvanized) or brass
Knob: aluminum, black anodized
Carriage / end plates, extruded aluminium, anodised, natural color
Guide shafts: stainless steel
Drive:
- Spindle / ball bearing, stainless steel, rustproof
- Spindle nut: plastic
Fastening screws: stainless steel, rustproof
Turning knob / scale ring: aluminum, black anodized
Aluminium, anodised, natural color
Cylinder screws DIN 912: stainless steel, rustproof
Wheel body: Aluminum
- Wheel rim turned on all sides and highly polished
Coupling elements: Steel, nitrated
- Running surfaces ground or PTFE-coated
- Bearing flange burnished, fixed
Rotatable cylinder handles GN598: Plastic, Duroplast, black, glossy
Axle part: Steel, zinc-plated, blue passivated
attachment and socket:
steel, blackened
clamping mechanism:
steel, hardened and ground
scale ring and Adjustment:
aluminum, black anodized
scale / arrow (Type A, KS, S)
engraved with laser precision
centrally aligned between two mounting holes
Aluminium:
- Hub machined
- Wheel rim turned on all sides
Concentricity and axial runout of the wheel rim < 0,4
Wheel body:
- Wheel rim highly polished
- unmachined surfaces blasted
Rotating cylindrical handles GN 598: Steel, plastic-coated, black, textured matt
With needle bearing
Aluminium:
- Hub machined
- Wheel rim turned on all sides
Concentricity and axial runout of the wheel rim < 0,4
Wheel body:
- Wheel rim highly polished
- unmachined surfaces blasted
Rotating cylindrical handles GN 598: Steel, plastic-coated, black, textured matt
With needle bearing
Wheel body made of aluminium:
- Wheel rim turned on all sides and highly polished
- Unprocessed surfaces plastic-coated, black, textured matt
Coupling elements: Steel, hardened, treads ground
Cover cap: Plastic, light gray
Rotatable cylindrical handles GN598: Steel, plastic-coated, black, textured matt
Shaft part steel: zinc-plated, blue passivated
With needle bearing
Aluminium:
- Hub machined
- Wheel rim turned on all sides
Run-out and axial run-out deviation of the wheel rim < 0,4
Wheel body completely plastic-coated, black, textured matt <
> Rotating cylindrical handles GN598: Steel, plastic-coated, black, textured matt
With needle bearing
Body:
- aluminum (Form N)
- steel (Form R / Type S), plated and blue passivated
wheels:
- bearing steel, hardened ball bearing, sealed (2 RS), lifetime lubrication
wiper:
plastic, PUR, gray
steel core, galvanized
Fits running rail GN2422
Aluminium:
- Hub machined
- Wheel rim turned on all sides
Concentricity and axial runout of the wheel rim < 0,4
Wheel body:
- Wheel rim highly polished
- unmachined surfaces blasted
Rotatable cylindrical handles GN 598: Steel, plastic-coated, black, textured mattWith plain bearing
Aluminium:
- Hub machined
- Wheel rim turned on all sides
Concentricity and axial runout of the wheel rim < 0,4
Wheel body:
- Wheel rim highly polished
- unmachined surfaces blasted
Rotating cylindrical handles GN 598: Steel, plastic-coated, black, textured matt
With plain bearing
Aluminium:
- Hub machined
- Wheel rim turned on all sides
Concentricity and axial run-out deviation of the wheel rim < 0,4
Wheel body: completely plastic-coated, black, textured matt
Revolving cylindrical handles GN 598: Steel, plastic-coated, black, textured matt
With plain bearing
aluminum, plastic-coated, black, RAL 9005, textured finish
Clamping bores unprocessed
Fastening / transmission elements:
screw DIN 912
hex nuts DIN 985
Locating Pins, driver
stainless steel, stainless steel 1.4301
Body: steel, chrome-plated
Spindle: steel, bare
knob: aluminum, anodized, black
hex bolt: steel, zinc plated, blue passivated (only form S1)
scales: engraved with laser precision, absolutely resistant to abrasion
lid: plastic, light gray
Aluminum
- Hub machined
- Wheel rim turned and polished on all sides
- Unmachined surfaces blasted
Concentricity and axial runout of the wheel rim < 0,4
Foldable handles GN798.7: Plastic, thermoplastic, black, matt, rotatable
Foldable mechanism:
- Axle part: Steel 1.0718, burnished
- Attachment: Sintered steel, burnished
Aluminum, anodized, natural color
Set screws DIN 913, steel, zinc-plated
Cylinder screws DIN 912, stainless steel, rustproof
Aluminium, anodised, natural color
Cylinder head screws DIN 912, stainless steel, rustproof
aluminum, plastic-coated, black, RAL 9005, textured finish
Clamping bores unprocessed
Fastening / transmission elements
screw DIN 912
hex nuts DIN 985
Locating Pins, drivers stainless steel, stainless steel 1.4301
Adapter shaft: Steel, burnished
Torque support: Aluminum, bright, tumbled
Aluminium, plastic-coated, black, textured matt
Guide bore unprocessed
Cylinder screws DIN 912, stainless steel, 1.4301
Hexagon nuts DIN 985, stainless steel, 1.4304 <
>
Die-cast aluminum
- Machined hub
- Turned wheel rim
- Plastic-coated
Colours:
- Black, RAL 9005, textured matt
- silver, RAL 9006, textured matt
concentricity and axial run-out deviation of the wheel rim < 0,4
folding handles GN798.7: plastic, thermoplastic, black, matt
folding mechanism: steel, burnished
Aluminium, anodised, natural color
Cylinder head screws DIN 912, stainless steel, rustproof
Die-cast aluminum
- Machined hub
- Turned wheel rim
- Plastic-coated
Colours:
- Black, RAL 9005, textured matt
- silver, RAL 9006, textured matt
concentricity and axial run-out deviation of the wheel rim < 0,4
folding handles GN798.7: plastic, thermoplastic, black, matt
folding mechanism: steel, burnished
Crank body: aluminium, plastic-coated
Colours:
- black, RAL 9005, textured matt
- silver, RAL 9006, textured matt
Flat side of Machined hub
Cover: plastic, light gray
Reversible handle GN 798.5: plastic, thermoplastic, black, matt
Reversible mechanism: stainless steel
- axle parts: rustproof, 1.4305
- attachment: sintered steel, 1.4404 <
>
Aluminium, plastic-coated, black, RAL 9005, textured matt
Square clamp, unprocessed
Cylinder screws DIN 912, stainless steel, 1.4301
Hexagon nuts DIN 985, stainless steel , 1.4301
Aluminum
- Hub machined
- Wheel rim turned and polished on all sides
- Unmachined surfaces blasted
Concentricity and axial runout of the wheel rim < 0,4
Foldable handles GN798.3: Plastic, thermoplastic, black, matt, rotatable
Foldable mechanism: Steel, burnished
stainless steel, stainless, 1.4308, dull blasted (NI) or
Aluminum, plastic coated, black, RAL 9005, textured finish (SW)
Clamping bores machined
sliding insert: plastic (PA / PTFE)
screw DIN 912 stainless steel 1.4301
hex nuts DIN 985, stainless steel 1.4301
Die-cast aluminium, plastic-coated, black, RAL 9005, textured matt
Pressure screws: stainless steel
The GN298 housings for angle/T gears are used in conjunction with bevel gears GN297 and linear/transmission units.
Die-cast aluminum
- Machined hub
- Turned wheel rim
- Plastic-coated
Colours:
- Black, RAL 9005, textured matt
- silver, RAL 9006, textured matt
concentricity and axial run-out deviation of the wheel rim < 0,4
folding handles GN798.3: plastic, thermoplastic, black, matt
folding mechanism: steel, burnished
Die-cast aluminium:
- Hub machined
- Wheel rim turned on all sides
- Wheel body completely plastic-coated
- Black, textured matt
Concentricity - and run-out deviation of the wheel rim under IT 12
Gear wheel: plastic (polyamide PA), glass fiber reinforced
Screw for anchor pin: steel, blued, injected
Rotatable cylinder handles GN 798 (plastic, thermoplastic, black, matt)
Aluminium, plastic-coated, black, RAL 9005, textured matt
Guide bores machined
Sliding insert plastic (PA / PTFE)
Cylinder screws DIN 912, stainless steel , 1.4301
Hexagon nuts DIN 985, stainless steel, 1.4301
Stainless steel, 1.4308, matt blasted or
Aluminum, plastic-coated, black, RAL 9005, textured matt
Guide / clamping bores machined
Sliding insert Plastic (PA / PTFE)
Cylinder screws DIN 912, stainless steel, 1.4301
Hexagon nuts DIN 985, stainless steel, 1.4301
stainless steel, stainless, 1.4308, dull blasted (NI) or
Aluminum, plastic coated, black, RAL 9005, textured finish (SW)
Clamping bores machined
sliding insert: plastic (PA / PTFE)
DIN 912 cylinder bolts, stainless steel, 1.4301
hex nuts DIN 985, stainless steel, 1.4301
Crank body
- Aluminium, plastic-coated, black, textured matt
- Flat side of the hub machined
Reversible handles GN598.3
Aluminium, plastic-coated, black, RAL 9005, textured matt
Guide bores machined
Sliding insert plastic (PA / PTFE)
Cylinder screws DIN 912, stainless steel , 1.4301
Hexagon nuts DIN 985, stainless steel, 1.4301
stainless steel, stainless, 1.4308, dull blasted or
Aluminum, plastic coated, black, textured finish
Clamping bores machined
sliding insert: plastic (PA / PTFE)
cap screws DIN 912, stainless steel 1.4301
hex nuts DIN 985, stainless steel 1.4301
Die-cast aluminium:
- machined hub
- wheel rim turned
- plastic-coated
colours:
- black, RAL 9005, textured matt
- silver, RAL 9006, textured matt
Concentricity and axial runout deviation of the wheel rim < 0,4
Reversible handles GN 798.3: Plastic, thermoplastic, black, matt
Reversible mechanism : Steel, blued
Crank body: aluminium, plastic-coated
Colours:
- black, RAL 9005, textured matt
- silver, RAL 9006, textured matt
Flat side of Machined hub
Cover: plastic, light gray
Foldable handles GN798.3: plastic, thermoplastic, black, matt
Foldable mechanism: steel, burnished
Stainless steel, 1.4308, matt blasted or
Aluminum, plastic-coated, black, textured matt
Guide bore machined
Sliding insert: plastic (PA / PTFE )
Cylinder screws DIN 912, stainless steel, 1.4301
Hexagon nuts DIN 985, stainless steel, 1.4301
Adapter shaft: Steel, burnished
Torque support: Aluminum, black anodized
aluminum, anodized black
wedge: Brass
Adjustable hand levers (Form H):
black, RAL 9005, textured finish
adjusting lever (form H): stainless steel, 1.4305
Allen-adjustment screw (Type S): stainless steel, 1.4305
the clamping element can be mounted so that the position of the clamping lever or the clamping screw is on the left or the right.
GN 711.1 reference arrows are available that can be attached to the periphery of the clamping element.