uitrusting
This Convection Shield is only compatible with:
Mosquito Magnum+ Liquid Cooled 1.75mm
Mosquito Magnum+ Liquid
Original Bondtech® OEM set of parts to use on the Sherpa Mini
from the Annex
Original Bondtech® OEM set of parts to use on the HextrudORT
from the HevORT project.
NEMA17 gestuurde stepper met een planetaire tandwieloverbrenging.
Geleverd met een 700 mm lange JST-XH6 naar PC2510 kabel met snelkoppelingen.
Bondtech aandrijftandwielset van gehard en oppervlaktebeschermd staal.
Precisie cnc-gefreesd.
Deze tandwielset bestaat uit een primair aandrijfwiel, een secundair aandrijfwiel, lagers en een as.
Bondtech aandrijftandwielset van gehard en oppervlaktebeschermd staal.
Precisie cnc-gefreesd.
Deze tandwielset bestaat uit een primair aandrijfwiel, een secundair aandrijfwiel, lagers en een as.
Bondtech aandrijftandwielset van gehard en oppervlaktebeschermd staal.
Precisie cnc-gefreesd.
Deze tandwielset bestaat uit een primair aandrijfwiel, een secundair aandrijfwiel, lagers en een as.
Plastic and mounting hardware set
For PERCH setup on CR-10 Smart Strain Gauge plates
Plastic parts made
Plastic and mounting hardware set
For PERCH setup on CR-6 SE and CR-6 Max Strain Gauge
Nema14 High resolution 1.8 degree pancake stepper motor.
Compatible with the following compact extruders:
LGX Lite
Orbiter
HextrudORT
Sherpa Mini
Deze houder voor de BMG-extruder is CNC-gefreesd met nauwkeurige toleranties in 3 mm dik aluminium dat een veilige en stabiele montage van de extruder garandeert.
NEMA17 1,8 graden pannenkoekstappenmotor met hoge resolutie.
Wordt geleverd met een 300 mm JST-XH6-kabel die is gestript zonder een tweede connector.
NEMA17 Pannenkoekstepper met een 150 mm lange niet-verwijderbare gestripte kabel met connector.
Prevents plastic adhesion to your nozzles and hotblock
Water-based PTFE nanosuspension
Repels plastic from the outside of
Activated alumina desiccant is 10x more powerful than comparable silica gel, and is non-toxic!
Creates
Use this mount to attach your Mosquito or Mosquito Magnum hotend directly to the LGX
Use this mount to attach your Copperhead Groove Mount hotend directly to the LGX Lite.
Laser
Adapt the Mosquito and Mosquito Magnum hotends to Bondtech QR and BMG extruders using the
Adapt the Mosquito and Mosquito Magnum hotends to Bondtech QR and BMG extruders using the
Orbiter style mount to use with the LGX Lite extruder.
Use this set to drop-in replace
PTFE Diameters: 3.18/6.4 mm, Length: 100 cm
The Copperhead Silicone Boot is:
Compatible with Copperhead hotends only.
Made from platinum cured silicone
The Mosquito Silicone Boot is:
Made from platinum cured silicone for higher temperature resistance
Thickly
Use this mount to install the LGX Lite on a MGN12C or MGN12H carriage.
Laser Sintered
Use this mount to install the LGX Lite on a MGN7C or MGN7H carriage.
Laser Sintered
Use this mount to install the LGX Lite on a MGN9C or MGN9H carriage.
Laser Sintered
Adapter met een geïntegreerde push-fit connector.
CNC-gefreesd in zwart geanodiseerd aluminium, push-fit connector voor 6 mm buis.
Adapter met een geïntegreerde push-fit connector.
CNC-gefreesd in zwart geanodiseerd aluminium, push-fit connector voor 4 mm buis.
PTFE Diameters: 4/6 mm, Length: 100 cm
Bevestiging voor Bondtech QR Extruder naar Ultimaker 1.
3D geprint in ABS, M5 schroefdraad inzetstukken in messing.
Standardmount for Bondtech QR Extruder
3D printed in ABS, M5 thread inserts.
2x mounting holes for M5,
PTFE Diameters: 3.18/6.4 mm, Length: 60 cm
Spare part for the Bondtech LGX® Lite
BeeHive Design
Front housing made of grey Polyamide without dyeing.
Spare part for the Bondtech LGX® Lite
Cubes Design
Front housing made of grey Polyamide without dyeing.
Spare part for the Bondtech LGX® Lite
Desert Design
Front housing made of grey Polyamide without dyeing.
Spare part for the Bondtech LGX® Lite
Voron Logo Design
Front housing made of grey Polyamide without
PTFE Diameters: 2/4 mm, Length: 100 cm
Plug & Play Interface Cable- Ferrules
50mm Interface cable with
Molex micro-fit 3.0 male connector on one
Plug & Play Interface Cable - JST SMP-02V-BC
50mm Interface cable with
Molex micro-fit 3.0 male connector
Plug & Play Interface Cable - JST VHR-2N
50mm Interface cable with
Molex micro-fit 3.0 male connector
Plug & Play Interface Cable - JST XH-2 With Lock
50mm Interface cable with
Molex micro-fit 3.0
Plug & Play Interface Cable - JST XHP-2
50mm Interface cable with
Molex micro-fit 3.0 male connector
Plug & Play Interface Cable - Molex MX-50-57-9002
50mm Interface cable with
Molex micro-fit 3.0 male connector
PTFE Diameters: 4/6 mm, Length: 60 cm