anodized
Features:
Housing: Aluminum
- natural color anodised (ALN)
- black anodized (ALS)
dragonflies use Glass plastic body
filling: colorless transparent (K)
potting compound: mineral
sensitivity (Sens): 30 angular minutes, per 2mm Blasenweg
mounting flange for mounting (form A) or involved (form B)
Housing: Aluminum
- natural color anodised (ALN)
- anodized black (ALS)
dragonflies use:
Glass plastic body
filling: colorless transparent (K)
potting compound: mineral
The housing is provided at its lower diameter d3 with grooves. A fixation for. As by bonding is facilitated by
sensitivity (Sens). 30 angular minutes per 2mm Blasenweg
Housing: Aluminum
- natural color anodised (ALN)
- anodized black (ALS)
dragonflies use:
Glass plastic body
filling: colorless transparent (K)
potting: mineral
forms:
A - with a smooth reference surface
the form A, we in particular then used when the dragonfly as a tool, for example, will provide several measuring points
B - with mounting thread
Sensitivity (Sens): 30 arc minutes per 2mm Blasenweg
Housing: Aluminum
- natural color anodised (ALN)
- anodized black (ALS)
dragonflies use:
Glass plastic body
filling: colorless transparent (K)
potting: mineral
Body:
- "ALS": aluminum, anodized black
viewing area: Glass
- Version "KT": plastic, white
viewing area: transparent
filling:
- colorless transparent (K)
- transparent green (G) (only in version KT)
sensitivity (Sens):
- 10 arc minutes per 2mm Blasenweg (version ALS)
- 40 arcmin per 2mm Blasenweg (version KT)
The level stakes are not aligned, d. H. an adjustment to the vertical position must by aligning the receiving component be guaranteed.
When running ALS reflection results from the black housing on the bubble edge, which improves the readability significantly.
The execution KT with contrast ring available within the vial housing (code 2), which ensures the same effect.
Alternatively, a corresponding improvement in contrast are also achieved by a dark wall of the mounting hole.
Adapter shaft: Steel, burnished
Torque support: Aluminum, black anodized
Adapter shaft: Steel, burnished
Torque support: Aluminum, black anodized
aluminum, anodized natural color
arrow (Type A) and scale (Type S 0 ... 9, 40 or 100 divisions): black printed
scale rings GN 526.1 are supplied unassembled so separately; per ring 3 matching grooved pins are enclosed
To adjust the knob GN526. (sold separately; not included).
Aluminium, anodised, natural color
Versions
- A - without mounting holes
or
- B - with mounting holes
With support profile GN646 .3 form B, the position and the edge distance of the drilling pattern is not defined.
attachment and socket:
steel, blackened
clamping mechanism:
steel, hardened and ground
scale ring and Adjustment:
aluminum, black anodized
scale / arrow (Type A, KS, S)
engraved with laser precision
centrally aligned between two mounting holes
Aluminum (AL)
- recessed arrow, that is - natural anodised
- printed in black
eloxalfarbig
print resistant to mild acids and alkalis as well as solvents transient exposure.
Bezugsflansche GN 723.3 are used in connection with knobs GN 723.4
Aluminum: anodized, black
Reference arrow: white, engraved with laser precision
clamping ring: rubber
friction ring: polyamide (only type A)
aluminum, anodized, natural color
scale (Type S 0 ... 9, 20 ticks) and arrow (Type M) engraved with laser precision
stainless steel screw DIN 916 with internal hexagon and serrated.
aluminum and anodized black
Lid: plastic, light gray
Collet / hexagon nut: Brass
Stainless steel screw DIN 916 with internal hexagon and serrated point
aluminum and anodized black
scale (Type S 0 ... 9, 20 subdivisions) and arrow (Type A), white, engraved with laser precision.
lid: plastic, light gray
collet / hexagon nut: brass
stainless steel screw DIN 916 with internal hexagon and serrated.
aluminum, anodized black
scale ring: plastic, black, pressed
arrow (Type A) and scale (Type S; 0th ..9, 20 subdivisions), white, engraved with laser precision
lid: plastic, light gray
collet / hexagon nut: brass
stainless steel screw DIN 916 with internal hexagon and serrated point
Body: steel, chrome-plated
Spindle: steel, bare
knob: aluminum, anodized, black
hex bolt: steel, zinc plated, blue passivated (only form S1)
scales: engraved with laser precision, absolutely resistant to abrasion
lid: plastic, light gray
Aluminum
anodized, black
Marking line white, engraved with laser precision
Stainless steel screw DIN 916 with internal hexagon and serrated point
aluminum, anodized black
wedge: Brass
Adjustable hand levers (Form H):
black, RAL 9005, textured finish
adjusting lever (form H): stainless steel, 1.4305
Allen-adjustment screw (Type S): stainless steel, 1.4305
the clamping element can be mounted so that the position of the clamping lever or the clamping screw is on the left or the right.
GN 711.1 reference arrows are available that can be attached to the periphery of the clamping element.
Carriage / end plates, extruded aluminium, anodised, natural color
Guide shafts: stainless steel
Drive:
- Spindle / ball bearing, stainless steel, rustproof
- Spindle nut: plastic
Fastening screws: stainless steel, rustproof
Turning knob / scale ring: aluminum, black anodized
Aluminium, anodised, natural color
Cylinder head screws DIN 912, stainless steel, rustproof
Aluminium, anodised, natural color
Cylinder head screws DIN 912, stainless steel, rustproof
Aluminum, anodized, natural color
Set screws DIN 913, steel, zinc-plated
Cylinder screws DIN 912, stainless steel, rustproof
Aluminium, anodised, natural color
Cylinder head screws DIN 912, stainless steel, rustproof
Aluminium, anodised, natural color
Cylinder screws DIN 912: stainless steel, rustproof
aluminum and anodized black
Stainless steel screw DIN 916 with internal hexagon and serrated
Lid: plastic, light gray