Upgrade Kits
Spare part made of TPE to replace the Lever Grip on a Bondtech LGX™ Large
Use this adapter set to fit the Creality original Thermistor into a Copperhead™ or Mosquito™
Spare parts set for the Bondtech LGX™ Large Gears eXtruder with:
3x M3x30 Low
Compatible with "LGX™ Black Anodized Aluminum Heat Sink" and
LGX™ Black Anodized Aluminum Air Cooled Cold
Spare part made of PA12 to replace the Direct Drive Interface Plug on a Bondtech
Spare part made of PA12 to replace the Bowden Interface Plug on a Bondtech LGX™
Use the CR-10 or Ender stock hotend with the Bondtech DDX.
Part made of PA12 (Nylon)
Use a Micro Swiss All Metal hotend with the Bondtech DDX.
Part made of PA12 (Nylon)
The X-Carriage kit is required to install our Bondtech Extruder Upgrade Kit for Prusa i3 MK3S (BT-EXT-KIT-68).
Klicky Mount to use with the Mini After LGX Lite set.
Plastic part made of grey
Spare Strain Relief Set to use with the Mini After LGX Lite set.
Plastic part made
Mount a BL Touch bed levelling sensor onto the DDX.
Part made of PA12 (Nylon) with
Mount a BL Touch bed levelling sensor onto the DDX.
Part made of PA12 (Nylon) with
Mount a BL Touch bed levelling sensor onto the DDX V3.
Part made of
To use with:
Bondtech DDX Direct Drive eXtruder for Creality
Bondtech DDX V2 Direct Drive eXtruder for
Hotend mount to use with the Mini After LGX Lite set.
Compatible with Dragon hotend and
Hotend mount to use with the Mini After LGX Lite set.
Compatible with Dragonfly hotend and
Hotend mount to use with the Mini After LGX Lite set.
Compatible with Dragonfly hotend and
Hotend mount to use with the Mini After LGX Lite set.
Compatible with Mosquito hotend and
Hotend mount to use with the Mini After LGX Lite set.
Compatible with Mosquito hotend and
This rebuild Kit for Wanhao D9 Extruder will make it possible to use the latest
Spare part made of Hardened Steel to replace a Drive Wheel on a Bondtech LGX™
To use with:
Bondtech DDX Direct Drive eXtruder for Creality
Bondtech DDX V2 Direct Drive eXtruder for
To solve the heat-creep
This Stainless Steel heat-break made by Bondtech for the Prusa Mini addresses
Mount a 12mm EZABL bed levelling sensor onto the DDX.
Part made of PA12
Mount a 18mm EZABL bed levelling sensor onto the DDX.
Part made of PA12
For owners of DDX v1 units only
Fit the Micro Swiss hotends in your
Spare part of the DDX Adapter sets for CR-10 v2 and v3
Made of PA12 (nylon);
Easy
Spare X-carriage to use with the Mini After LGX Lite set.
Plastic part made of grey
Spare part of the DDX Adapter sets for CR-10 v2 and v3
Made of
Spare part of the DDX Adapter sets for CR-10(S) Pro/Max
Made of PA12 (nylon);
Compatible with 4010 and 4020 axial fans.
It requires the alignment shaft and screw that are
Extended compatibility:
Fits the Micro Swiss hotends in your DDX.
Fits all previous models plus Ender-6
DDS Extension Cable
This extension cable will allow you to use our Direct Drive System for
Spare part of the DDX Adapter sets for CR-10 v2 and v3
Made of PA12 (nylon);
Easy
Simplifies The Setup Process
Fits all the DDX v3 fan Adapter sets;
Supports 40x40x10, 40x40x20, and
This LGX® set is supplied with:
1x LGX® PA12 Fan Shroud for Copperhead®;
1x LGX® PA12 Z-axis
This LGX® set is supplied with:
1x LGX® PA12 Fan Shroud for Mosquito®;
1x LGX® PA12 Z-axis
Spare Cowling to use with the Mini After LGX Lite set.
Plastic part made of grey
Made of PA12 (nylon);
Easier to install;
One screw fan mount;
Easier to adjust;
With front access adjustment screw;
Made of PA12 (nylon);
Easier to install;
With snap-on fan mount;
Easier to adjust;
With front access adjustment screw;
Made of PA12 (nylon);
Easier to install;
With snap-on fan mount;
Easier to adjust;
With front access adjustment screw;
This Bondtech Extruder Body Rebuild Set is only for customers who previously bought a Bondtech MK2/MK2S or MK2.5/MK3 Upgrade Kit and have their Prusa i3 upgraded to MK2.5S or MK3S.
Mount a Slice hotend on your Creality
CR-6 SE, CR-6 Max or CR-10 Smart
Use the whole print surface of the Ender-5 Plus with this accessory.
Strong Plastic Parts made
Spare part made of Copper and Steel to use as replacement for the heat break
Upgrade your Prusa Mini extruder to support the Internal Filament Sensor feature.
This is
Level-up and solve the heat-creep
This bi-metallic heat-break made by Slice Engineering for the Prusa Mini
This set is necessary to install a DDX v3 Upgrade Kit on the compatible models.
This X-Carriage kit is required to install our "Bondtech LGX Shortcut Copperhead for Prusa Mk3S"
This X-Carriage kit is required to install our "Bondtech LGX™ for MK3S & Mosquito" upgrade
The X-Carriage Kit is required to install our Bondtech Extruder Upgrade Kit for Prusa i3 MK3S (BT-EXT-KIT-68)
Enables using a 5015 radial fan on your DDX V1 or V2.
Parts made of PA12
This set is necessary to install a DDX Upgrade Kit on the compatible models.
This set
This plastic parts set is for users looking to install a LGX® FF on a
Mini After LGX Lite plastic parts set to use with LGX Lite extruder on Voron
This LGX Shortcut Copperhead Accessories for Prusa MK3S is supplied with:
1x LGX PA12 Mount;
1x LGX
This LGX Shortcut Mosquito Accessories for Prusa MK3S is supplied with:
1x LGX PA12 Mount;
1x LGX
Upgrade kit compatible with LGX Lite only to use on:
Creality CR-6 SE;
CR-6 Max;
CR-10 Smart.
The LGX
To install on your Anycubic Mega-X, Mega-S or Mega-P(ro) a Bondtech direct extruder upgrade and
Compatible with DDX v3, now even easier to install;
Fit a Direct Drive eXtruder on the
Upgrade your Creality hotend with genuine Copperhead heat Break and Hot Block to PHase 2
Upgrade your Creality hotend with genuine Copperhead heat Break and Hot Block to PHase 2
Upgrade your Copperhead Phase 2 hot end into a full Copperhead Phase 3.
Improve the heat
New Bondtech Internal Filament Sensor Extruder
for Prusa Mini.
This extruder is an evolution of
Accessories to build the LGX™ for Prusa MK3S and Mosquito upgrade kit.
High Temperature Set
EAN :
Updated Version
This upgrade is supplied with the newest version of the Bondtech Mini Geared (BMG)
Updated Version
Now this upgrade is supplied with the newest version of the Bondtech Mini Geared
The Bondtech DDX Direct Drive eXtruder for Creality 3D printers is an upgrade kit that
Buy a bowden extruder that you can easily convert to a Direct Drive extruder later.
Bondtech Wanhao D6 Kit
Bondtech upgrade kit for Wanhao D6
Upgrade your Creality hotend and DDX Direct Drive eXtruder with a full genuine Copperhead hotend
An extruder upgrade kit for Prusa i3 MK2.5S/MK3S
A lightweight high-resolution extruder upgrade for the popular Prusa i3 MK2.5S or MK3S 3D printers, featuring an optimized design achieved with the help of the community.
This is a LGX Direct Drive Setup to use on
Artillery Sidewinder X1
prepared to use Copperhead
This is a LGX Direct Drive Setup to use on
Artillery Sidewinder X1
prepared to use Mosquito
The Bondtech DDX Direct Drive eXtruder for Creality 3D printers is an upgrade kit that
Your Raise3D Pro2 is failing on those big PLA prints you bought it for? We
The Bondtech DDX Direct Drive eXtruder for Creality 3D printers is an upgrade kit that
Upgrade your Creality hotend and DDX Direct Drive eXtruder with a full genuine Mosquito hotend
This is a LGX upgrade kit to use on
Prusa MK3S and MK3S+.
with only Mosquito
Upgrade your Creality hotend and DDX Direct Drive eXtruder with a full genuine Mosquito hotend