Spartan Arduino PLC 16DA
8 Inputs (7 to 24Vdc): Analog (0-10Vdc) and Digital (7 to 24Vdc)
8 Outputs (5 to 24Vdc): Analog (0-10Vdc) and Digital/PWM Isolated (5 to 24Vdc)
Communications: USB, RS485, Modbus (RTU), I2C, SPI
Arduino-based PLC
It has 16 digital inputs / outputs. 8x analog or digital inputs (see specifications), and 8x digital or analog output (see especifications).
Spartan Controllers family offers the possibility of communication between two computers using I2C obtaining a master-slave connection.
Instant connection and programming
The Spartan Controllers family, as it uses an Arduino LEONARDO, lets you program it through the USB.
This feature lets an immediate access in order to program, mantain and prepare it for its set up. It lets you to control your equipment without no limits.
Standarised modules
The Spartan Controllers devices are programmed exactly on the same way. Once you have used one of them, the rest can be configured using the same methodology.
Expandable
Using the I2C connection, that all the Spartan Controllers family have, you can connect up to 127 modules,
which it means that you can have up to 2.540 Input / Ouputs in Master Slave connection.
NOTE: for I2C you need to tell us that requirement.
Flexible and dynamic
All the components are configurable both configure like make your jobs as Master or Slave when used on Master-Slave connection through I2C.
Downloads:
User Guide
CE declaration
Technical Details:
Inputs (Arduino Leonardo included):
8 Inputs
(8x) Digital (7-24Vdc).
(6x) of 8x, Analog (0-10Vdc) configurable by Software.
Communications:
(1x) USB port.
(1x) Modbus (RTU)
(1x) I2C*
(1x) SPI*
* See pinout to use communications ports because the number of inputs / outputs can be reduced.
Outputs (Arduino Leonardo included)
8 Outputs:
(8x) Digitals isolated (5 to 24Vdc)/ (6x) of 8x, PWM (5 to Vdc) outputs, configurables by Switch1.
(5x) of 8x, Analog 0-10V output. configurables by Switch.
Other technical specifications
Pot: 30W
Flash memory: 32kB of wich 4kB used by bootloader.
SRAM: 2,5kB
EEPROM: 1kB
Clock Speed: 16MHz
* Read the manual to set the signal type.
