PLC Arduino ARDBOX 20 I/Os Relay HF Modbus
10 Inputs (7-24Vdc): Analog (0-10Vdc) and Digital (7-24Vdc) inputs
10 Outputs: (8x) Relay 220Vac and (2x) Analog Output
Communications: USB, RS485 (Half-Full Duplex), I2C, SPI. MODBUS RTU Available
Arduino-based PLC
It has 20 digital inputs / outputs. ARDBOX PLC product family offers the possibility of communication between two computers using I2C obtaining a master-slave connection.
Instant connection and programming
The Basic Controllers family, as it uses an Arduino LEONARDO, lets you program it through the USB.
This feature lets it an immediate access in order to program, mantain and prepare it for its set up.
It lets you to control your equipment without no limits.
Standarised modules
The different ARDBOX PLC family devices are programmed exactly on the same way.
Once you have used one of them, the rest can be configured using the same methodology.
Expandable
Using the I2C connection, which all the Basic Controllers family have, you can connect up to 127 modules,
this means that you can have up to 2.540 Input / Ouputs in Master Slave connection.
NOTE: for I2C you need to ask for us that requirement.
Flexible and dynamic
All the components are configurable both configure, like make your jobs as Master or Slave when used on Master-Slave connection through I2C.
Downloads:
User Guide
CE declaration
Technical Details:
Inputs
Total Inputs: 10
Total Digital Optoisolated Inputs (7-24Vdc): 2
Digital Optoisolated Inputs (7-24Vdc): 0
Digital Optoisolated Inputs (7-24Vdc) | can work like interrupt Inputs INT (7-24Vdc): 2
10 bit Analog Inputs (0-10V) | Digital (5-24Vdc) Inputs configurable by software: 8
Inputs notes:
* From the (Xx) Digital, (Yx) can be configured as Analog (Xx = Total Digital In, Yx = Number of Analog In)
* From the (Xx) Digital, (Zx) can be configured as Interrupt (Xx = Total Digital In, Zx = Number of Interrupt pins)
Outputs
Total Outputs: 10
Digital Optoisolated Outputs (5-24Vdc): 0
Digital Optoisolated and PWM (5-24Vdc) | 8 bit Analog (0-10V) Outputs configurable by switch: 2
Relay Outputs (220Vac - 5A): 8
Communications
Ethernet communication - NO
Wi-Fi & BLE (Bluetooth Low Energy) - NO
GPRS/GSM - NO
USB port (type B) communication (for uploading or debugging only) - 0
Micro USB port (type B) communication (for uploading or debugging only) - 1
I2C communication (interface with other Industrial Shields, sensors, I/Os modules) - 1
Serial TTL (UART) communication - 0
RS-232 communication - 1
Half/Full Duplex RS-485 communication - 1
SPI external port communication (using MOSI, MISO, SS pins of Arduino) - 1
RTC (Real Time Clock. NOTE: I2C port used. See pinout modification) - NO
µSD Socket (using SPI port, chip select D53 pin) - NO
Communications notes:
* When using I2C, 2 inputs are lost
The Open Source Board CPU
Single Board Computer (SBC) Microcontroller: Arduino Leonardo Original Board (ATmega32u4)
Flash Memory (KB): 32
Flash Memory of which used by bootloader (KB): 4
SRAM (KB): 2.5
EEPROM (KB): 1
Clock Speed (MHz): 16
Safety
Conformity with Health, Safety, and Environmental Protection (CE):
EN61010-1 | EN61010-2-201 | EN61131-2:2007(Clause 8: Zone A/B EMC and clause 11:LVD) |
EN61000-6-4:2007 + A1 2011 (Emissions) | EN 61000-6-2:2005 (Immunity)
Medical Devices Directive (CE): 93/42/EEC
FCC Federal Code of Regulation (CFR) for Electronic Equipment: EMC: FCC Part 15
RoHS: Directive 2002/95/EC | Restriction of Hazardous Substances (EEE)
UL: STD 61010-2-201 and UL STD 61010-1 | expecting final auditory (tested)
NCAGE (Commercial and Government Entity Code - Department of Defense):
NCAGE 99SGB |Commercial and Government Entity Code | Boot&Work Corp SL Industrial Shields
Other information
PLC measures: 100x45x115
DIN Rail mounting
Max. consum.: 1.5A
Power Supply Voltage (Vdc) Range: 12-24
Power Consumption (VAC max.): 30
Operating Temperture C: 0C-60C
Operating Temperature F: 32F-140F
Operating Relative Humidity % (no condensation): 10%-90%
Package Size: 13cm x 14cm x 8cm
Packaging: Box
ECCN Number: EAR99H
HTS Code: 8537.10.10.90
740.17 Language - 740.17 (b)(1) for self-classification or (b)(3) CCATS issued: §740.17 (b)(1)
Country of Origin: Spain
STATIC Sensitive: NO
Moisture Sensitivity Level (MSL): MSL 1 - Unlimited
Lead Free
RoHS Compliant by Exemption? NO
Does Part Contain Lithium? NO
Product Weight: 350 gram
Other Technical Specifications:
* Rx,Tx pins are not available using RS485.
For SPI you need to choose another pin for Select Function
(You can choose, SDA, SCL, Rx, Tx, Pins of Arduino)
How to start
1. Download the open-source software "Arduino IDE" version 1.8.0 or higher and open it.
2. Click on "File" and then on "Preferences".
3. See the "Additional Boards Manager URLs":
text box inside the "Settings" tab and add this URL:
http://apps.industrialshields.com/main/arduino/boards/package_industrialshields_index.json
4. Close the preferences window with the "Ok" button.
5. Click on "Tools" menu , and open the "Boards" submenu, and click the "Boards Manager" option, to open the Boards Manager window.
6. Search "industrialshields" to the search filter and select to the list and click "Install" or "Update" if you have not got the latest version.
7. Close the "Boards Manager". Now you can select each of our PLCs by clicking on "Tools", then "Board",
then "Industrial Shields Boards" and select your family of PLCs.
Contact support@industrialshields.com if you have any questions.
