Kits de mise à niveau
Article 1 - 100 de 112
Arrow Hotend Upgrade Adapter Set
Mount a Slice hotend on your Creality
CR-6 SE, CR-6 Max or CR-10 Smart
Mount a Slice hotend on your Creality
CR-6 SE, CR-6 Max or CR-10 Smart
Assembly kit Ultimaker 2. Assembly kit for Ultimaker 2 mount, contains a vibration dampening plate in 3D printed TPU
New version: with filament tension adjustment
The BMG-HT for the Intamsys Funmat HT is a high temperature upgrade kit based on our popular Bondtech Mini Geared (BMG) Extruder.
Bondtech DDX v3 For Creality
The Bondtech DDX Direct Drive eXtruder for Creality 3D printers is an upgrade kit that
The Bondtech DDX Direct Drive eXtruder for Creality 3D printers is an upgrade kit that
Bondtech DDX v3 For Creality CR-10(S)Pro/Max
The Bondtech DDX Direct Drive eXtruder for Creality 3D printers is an upgrade kit that
The Bondtech DDX Direct Drive eXtruder for Creality 3D printers is an upgrade kit that
Bondtech DDX v3 For Creality Ender/CR-10(S)
The Bondtech DDX Direct Drive eXtruder for Creality 3D printers is an upgrade kit that
The Bondtech DDX Direct Drive eXtruder for Creality 3D printers is an upgrade kit that
Bondtech Heat-break Kit for Prusa Mini
To solve the heat-creep
This Stainless Steel heat-break made by Bondtech for the Prusa Mini addresses
To solve the heat-creep
This Stainless Steel heat-break made by Bondtech for the Prusa Mini addresses
Bondtech Hotend Fix for Raise3D Pro2
Your Raise3D Pro2 is failing on those big PLA prints you bought it for? We
Your Raise3D Pro2 is failing on those big PLA prints you bought it for? We
Bondtech LGX B for Anycubic Mega-X
Buy a bowden extruder that you can easily convert to a Direct Drive extruder later.
Buy a bowden extruder that you can easily convert to a Direct Drive extruder later.
Bondtech LGX DD For Artillery Sidewinder X1 For Copperhead
This is a LGX Direct Drive Setup to use on
Artillery Sidewinder X1
prepared to use Copperhead
This is a LGX Direct Drive Setup to use on
Artillery Sidewinder X1
prepared to use Copperhead
Bondtech LGX DD for Artillery Sidewinder X1 For Mosquito
This is a LGX Direct Drive Setup to use on
Artillery Sidewinder X1
prepared to use Mosquito
This is a LGX Direct Drive Setup to use on
Artillery Sidewinder X1
prepared to use Mosquito
Bondtech LGX DD for Artillery Sidewinder X1 With Copperhead
This is a LGX® Direct Drive Setup to use on
Artillery Sidewinder X1
prepared to use Copperhead
This is a LGX® Direct Drive Setup to use on
Artillery Sidewinder X1
prepared to use Copperhead
Bondtech LGX DD For Artillery Sidewinder X1 With Mosquito Magnum
This is a LGX® Direct Drive Setup to use on
Artillery Sidewinder X1
prepared to use Mosquito
This is a LGX® Direct Drive Setup to use on
Artillery Sidewinder X1
prepared to use Mosquito
Bondtech LGX for MK3S & Mosquito
This is a LGX upgrade kit to use on
Prusa MK3S and MK3S+.
with only Mosquito
This is a LGX upgrade kit to use on
Prusa MK3S and MK3S+.
with only Mosquito
Bondtech LGX Shortcut Copperhead for Prusa MK3S
This is a LGX Shortcut Upgrade Kit to use on
Prusa MK3S and MK3S+.
It
This is a LGX Shortcut Upgrade Kit to use on
Prusa MK3S and MK3S+.
It
Bondtech LGX Shortcut Mosquito For Prusa MK3S
This is a LGX Shortcut Upgrade Kit to use on
Prusa MK3S and MK3S+.
It uses
This is a LGX Shortcut Upgrade Kit to use on
Prusa MK3S and MK3S+.
It uses
Bondtech Wanhao D6 Kit
Bondtech upgrade kit for Wanhao D6
Bondtech Wanhao D9 Kit
Copperhead for CR-10(S) Pro/Max DDX PH2
Upgrade your Creality hotend with genuine Copperhead heat Break and Hot Block to PHase 2
Upgrade your Creality hotend with genuine Copperhead heat Break and Hot Block to PHase 2
Copperhead for Ender/CR-10(S) DDX PH2
Upgrade your Creality hotend with genuine Copperhead heat Break and Hot Block to PHase 2
Upgrade your Creality hotend with genuine Copperhead heat Break and Hot Block to PHase 2
Copperhead Heat-break for Prusa Mini
Level-up and solve the heat-creep
This bi-metallic heat-break made by Slice Engineering for the Prusa Mini
Level-up and solve the heat-creep
This bi-metallic heat-break made by Slice Engineering for the Prusa Mini
Copperhead LGX Heat Break
Spare part made of Copper and Steel to use as replacement for the heat break
Spare part made of Copper and Steel to use as replacement for the heat break
Creality3D CR-10 V2 Extruder Kit
Updated Version
This upgrade is supplied with the newest version of the Bondtech Mini Geared (BMG)
Updated Version
This upgrade is supplied with the newest version of the Bondtech Mini Geared (BMG)
Creality3D CR-10S PRO Extruder Kit
Updated Version
Now this upgrade is supplied with the newest version of the Bondtech Mini Geared
Updated Version
Now this upgrade is supplied with the newest version of the Bondtech Mini Geared
DDS Extension Cable 40cm
DDS Extension Cable
This extension cable will allow you to use our Direct Drive System for
DDS Extension Cable
This extension cable will allow you to use our Direct Drive System for
DDX Adapter For CR-10/Ender Hotend
Use the CR-10 or Ender stock hotend with the Bondtech DDX.
Part made of PA12 (Nylon)
Use the CR-10 or Ender stock hotend with the Bondtech DDX.
Part made of PA12 (Nylon)
DDX Adapter For Micro Swiss All-Metal
Use a Micro Swiss All Metal hotend with the Bondtech DDX.
Part made of PA12 (Nylon)
Use a Micro Swiss All Metal hotend with the Bondtech DDX.
Part made of PA12 (Nylon)
DDX Adapter Set for 5015 Radial Fan
Enables using a 5015 radial fan on your DDX V1 or V2.
Parts made of PA12
Enables using a 5015 radial fan on your DDX V1 or V2.
Parts made of PA12
DDX Adapter Set For Copperhead
To use with:
Bondtech DDX Direct Drive eXtruder for Creality
Bondtech DDX V2 Direct Drive eXtruder for
To use with:
Bondtech DDX Direct Drive eXtruder for Creality
Bondtech DDX V2 Direct Drive eXtruder for
DDX Adapter Set For Mosquito
To use with:
Bondtech DDX Direct Drive eXtruder for Creality
Bondtech DDX V2 Direct Drive eXtruder for
To use with:
Bondtech DDX Direct Drive eXtruder for Creality
Bondtech DDX V2 Direct Drive eXtruder for
DDX Bed Rod Holder Set for Ender-5 Plus
Use the whole print surface of the Ender-5 Plus with this accessory.
Strong Plastic Parts made
Use the whole print surface of the Ender-5 Plus with this accessory.
Strong Plastic Parts made
DDX Mount Plate CR-10 v2 & v3
Spare part of the DDX Adapter sets for CR-10 v2 and v3
Made of PA12 (nylon);
Easy
Spare part of the DDX Adapter sets for CR-10 v2 and v3
Made of PA12 (nylon);
Easy
DDX PH2 to PH3 Copperhead Upgrade
Upgrade your Copperhead Phase 2 hot end into a full Copperhead Phase 3.
Improve the heat
Upgrade your Copperhead Phase 2 hot end into a full Copperhead Phase 3.
Improve the heat
DDX PH3 Copperhead Upgrade
Upgrade your Creality hotend and DDX Direct Drive eXtruder with a full genuine Copperhead hotend
Upgrade your Creality hotend and DDX Direct Drive eXtruder with a full genuine Copperhead hotend
DDX PH3 Mosquito Magnum Upgrade
Upgrade your Creality hotend and DDX Direct Drive eXtruder with a full genuine Mosquito hotend
Upgrade your Creality hotend and DDX Direct Drive eXtruder with a full genuine Mosquito hotend
DDX PH3 Mosquito Upgrade
Upgrade your Creality hotend and DDX Direct Drive eXtruder with a full genuine Mosquito hotend
Upgrade your Creality hotend and DDX Direct Drive eXtruder with a full genuine Mosquito hotend
DDX Thermistor Adapter 3.0 mm
Use this adapter set to fit the Creality original Thermistor into a Copperhead™ or Mosquito™
Use this adapter set to fit the Creality original Thermistor into a Copperhead™ or Mosquito™
DDX Tube Mount for CR-10 v2 & v3
Spare part of the DDX Adapter sets for CR-10 v2 and v3
Made of
Spare part of the DDX Adapter sets for CR-10 v2 and v3
Made of
DDX Tube Mount for CR-10(S) Pro/Max
Spare part of the DDX Adapter sets for CR-10(S) Pro/Max
Made of PA12 (nylon);
Spare part of the DDX Adapter sets for CR-10(S) Pro/Max
Made of PA12 (nylon);
DDX v2 Rear Housing SLS
For owners of DDX v1 units only
Fit the Micro Swiss hotends in your
For owners of DDX v1 units only
Fit the Micro Swiss hotends in your
DDX V3 Adapter Set for CR-10v2 & CR-10v3
Compatible with DDX v3, now even easier to install;
Fit a Direct Drive eXtruder on the
Compatible with DDX v3, now even easier to install;
Fit a Direct Drive eXtruder on the
DDX v3 Adapter Set For Creality CR-10(S)Pro/Max
This set is necessary to install a DDX Upgrade Kit on the compatible models.
This set
This set is necessary to install a DDX Upgrade Kit on the compatible models.
This set
DDX v3 Adapter Set For Creality Ender/CR-10
This set is necessary to install a DDX v3 Upgrade Kit on the compatible models.
This set is necessary to install a DDX v3 Upgrade Kit on the compatible models.
DDX v3 Front Housing PA12
Simplifies The Setup Process
Fits all the DDX v3 fan Adapter sets;
Supports 40x40x10, 40x40x20, and
Simplifies The Setup Process
Fits all the DDX v3 fan Adapter sets;
Supports 40x40x10, 40x40x20, and
DDX v3 PA12 Fan Shroud for 5015 Fans
Made of PA12 (nylon);
Easier to install;
One screw fan mount;
Easier to adjust;
With front access adjustment screw;
Made of PA12 (nylon);
Easier to install;
One screw fan mount;
Easier to adjust;
With front access adjustment screw;
DDX v3 PA12 Fan Shroud for CR-10(S) Pro/Max
Made of PA12 (nylon);
Easier to install;
With snap-on fan mount;
Easier to adjust;
With front access adjustment screw;
Made of PA12 (nylon);
Easier to install;
With snap-on fan mount;
Easier to adjust;
With front access adjustment screw;
DDX v3 PA12 Fan Shroud for Ender/CR-10(S)
Made of PA12 (nylon);
Easier to install;
With snap-on fan mount;
Easier to adjust;
With front access adjustment screw;
Made of PA12 (nylon);
Easier to install;
With snap-on fan mount;
Easier to adjust;
With front access adjustment screw;
DDX v3 Rear Housing PA12
Extended compatibility:
Fits the Micro Swiss hotends in your DDX.
Fits all previous models plus Ender-6
Extended compatibility:
Fits the Micro Swiss hotends in your DDX.
Fits all previous models plus Ender-6
DDX Z-sensor Plate CR-10 v2 & v3
Spare part of the DDX Adapter sets for CR-10 v2 and v3
Made of PA12 (nylon);
Easy
Spare part of the DDX Adapter sets for CR-10 v2 and v3
Made of PA12 (nylon);
Easy
Dragon 3007 Adapter for Mini After LGX Lite
Hotend mount to use with the Mini After LGX Lite set.
Compatible with Dragon hotend and
Hotend mount to use with the Mini After LGX Lite set.
Compatible with Dragon hotend and
Dragonfly 3007 Adapter for Mini After LGX Lite
Hotend mount to use with the Mini After LGX Lite set.
Compatible with Dragonfly hotend and
Hotend mount to use with the Mini After LGX Lite set.
Compatible with Dragonfly hotend and
Dragonfly 3010 Adapter for Mini After LGX Lite
Hotend mount to use with the Mini After LGX Lite set.
Compatible with Dragonfly hotend and
Hotend mount to use with the Mini After LGX Lite set.
Compatible with Dragonfly hotend and
This Bondtech Extruder Body Rebuild Set is only for customers who previously bought a Bondtech MK2/MK2S or MK2.5/MK3 Upgrade Kit and have their Prusa i3 upgraded to MK2.5S or MK3S.
Extruder DDG Upgrade Kit for Ultimaker 2+
Extruder DDG Upgrade Kit for Ultimaker 3
Extruder Upgrade Kit for BCN3D Sigma
Extruder Upgrade Kit for Creality CR-10S (with mount for CR-10S)
Extruder Upgrade Kit for Creality CR-10 (with mount for CR-10)
Extruder Upgrade Kit Creality for CR-10 (without mount)
Extruder Upgrade Kit for FlashForge Creator Pro2016 Dual Nozzle
Extruder Upgrade Kit for Makerbot Replicator 2X Dual Nozzle
Extruder upgrade kit for PRUSA I3 MK2/S, MK2.5, MK3 WITH BMG
Extruder Upgrade Kit for QR Ultimaker 2
Extruder Upgrade Kit for QR Ultimaker 3
Extruder Upgrade Kit for Raise3D DualDirect
Extruder Upgrade Kit for Raise3D SingleDirect
Extruder Upgrade Kit for Replicator 2 Single Nozzle
Extruder Upgrade Kit for TEVO Tornado
An extruder upgrade kit for Prusa MK2.5 or Prusa MK3
An extruder upgrade kit for Prusa i3 MK2.5S/MK3S
A lightweight high-resolution extruder upgrade for the popular Prusa i3 MK2.5S or MK3S 3D printers, featuring an optimized design achieved with the help of the community.
An extruder upgrade kit for Prusa MK2 or Prusa MK2S
FDM Sensor Spacer for Creality CR-10 V2
The X-Carriage kit is required to install our Bondtech Extruder Upgrade Kit for Prusa i3 MK3S (BT-EXT-KIT-68).
IFS Extruder for Prusa Mini or Mini+
New Bondtech Internal Filament Sensor Extruder
for Prusa Mini.
This extruder is an evolution of
New Bondtech Internal Filament Sensor Extruder
for Prusa Mini.
This extruder is an evolution of
LGX Accessories for MK3S & Mosquito
Accessories to build the LGX™ for Prusa MK3S and Mosquito upgrade kit.
High Temperature Set
EAN :
Accessories to build the LGX™ for Prusa MK3S and Mosquito upgrade kit.
High Temperature Set
EAN :
LGX Accessories For Sidewinder X1 and Copperhead
This LGX® set is supplied with:
1x LGX® PA12 Fan Shroud for Copperhead®;
1x LGX® PA12 Z-axis
This LGX® set is supplied with:
1x LGX® PA12 Fan Shroud for Copperhead®;
1x LGX® PA12 Z-axis
LGX Accessories For Sidewinder X1 and Mosquito
This LGX® set is supplied with:
1x LGX® PA12 Fan Shroud for Mosquito®;
1x LGX® PA12 Z-axis
This LGX® set is supplied with:
1x LGX® PA12 Fan Shroud for Mosquito®;
1x LGX® PA12 Z-axis
LGX Air-Cooled Cold Block
LGX Air-Cooled Cold Block M
LGX Air-Cooled Cold Block Mounting Hardware
Compatible with "LGX™ Black Anodized Aluminum Heat Sink" and
LGX™ Black Anodized Aluminum Air Cooled Cold
Compatible with "LGX™ Black Anodized Aluminum Heat Sink" and
LGX™ Black Anodized Aluminum Air Cooled Cold
LGX Air-Cooled Heat Sink
Compatible with 4010 and 4020 axial fans.
It requires the alignment shaft and screw that are
Compatible with 4010 and 4020 axial fans.
It requires the alignment shaft and screw that are
LGX Bowden Interface Plug
Spare part made of PA12 to replace the Bowden Interface Plug on a Bondtech LGX™
Spare part made of PA12 to replace the Bowden Interface Plug on a Bondtech LGX™
LGX Direct Drive Interface Plug
Spare part made of PA12 to replace the Direct Drive Interface Plug on a Bondtech
Spare part made of PA12 to replace the Direct Drive Interface Plug on a Bondtech
LGX Hardened Steel Drive Wheel
Spare part made of Hardened Steel to replace a Drive Wheel on a Bondtech LGX™
Spare part made of Hardened Steel to replace a Drive Wheel on a Bondtech LGX™
LGX Lite Arrow for Creality
Upgrade kit compatible with LGX Lite only to use on:
Creality CR-6 SE;
CR-6 Max;
CR-10 Smart.
The LGX
Upgrade kit compatible with LGX Lite only to use on:
Creality CR-6 SE;
CR-6 Max;
CR-10 Smart.
The LGX
LGX Mounting Accessories
Spare parts set for the Bondtech LGX™ Large Gears eXtruder with:
3x M3x30 Low
Spare parts set for the Bondtech LGX™ Large Gears eXtruder with:
3x M3x30 Low
LGX Short Plastic Set for FF on Prusa
This plastic parts set is for users looking to install a LGX® FF on a
This plastic parts set is for users looking to install a LGX® FF on a
LGX Shortcut Accessories Set for Anycubic
To install on your Anycubic Mega-X, Mega-S or Mega-P(ro) a Bondtech direct extruder upgrade and
To install on your Anycubic Mega-X, Mega-S or Mega-P(ro) a Bondtech direct extruder upgrade and
LGX Shortcut Copperhead Accessories For MK3S
This LGX Shortcut Copperhead Accessories for Prusa MK3S is supplied with:
1x LGX PA12 Mount;
1x LGX
This LGX Shortcut Copperhead Accessories for Prusa MK3S is supplied with:
1x LGX PA12 Mount;
1x LGX
LGX Shortcut Mosquito Accessories For MK3S
This LGX Shortcut Mosquito Accessories for Prusa MK3S is supplied with:
1x LGX PA12 Mount;
1x LGX
This LGX Shortcut Mosquito Accessories for Prusa MK3S is supplied with:
1x LGX PA12 Mount;
1x LGX
LGX Shortcut X-carriage for MK3S(+)
This X-Carriage kit is required to install our "Bondtech LGX Shortcut Copperhead for Prusa Mk3S"
This X-Carriage kit is required to install our "Bondtech LGX Shortcut Copperhead for Prusa Mk3S"
LGX TPE Lever Grip
Spare part made of TPE to replace the Lever Grip on a Bondtech LGX™ Large
Spare part made of TPE to replace the Lever Grip on a Bondtech LGX™ Large
LGX X-carriage for MK3S & Mosquito
This X-Carriage kit is required to install our "Bondtech LGX™ for MK3S & Mosquito" upgrade
This X-Carriage kit is required to install our "Bondtech LGX™ for MK3S & Mosquito" upgrade
Épuisé
Mini After LGX Lite Upgrade Kit for Voron V0
Upgrade kit based on the LGX Lite to use on the Voron V0.1
The Mini After
Upgrade kit based on the LGX Lite to use on the Voron V0.1
The Mini After
Mosquito 3007 Adapter for Mini After LGX Lite
Hotend mount to use with the Mini After LGX Lite set.
Compatible with Mosquito hotend and
Hotend mount to use with the Mini After LGX Lite set.
Compatible with Mosquito hotend and
Mosquito 3010 Adapter for Mini After LGX Lite
Hotend mount to use with the Mini After LGX Lite set.
Compatible with Mosquito hotend and
Hotend mount to use with the Mini After LGX Lite set.
Compatible with Mosquito hotend and
PA12 Cowling for Mini After LGX Lite
Spare Cowling to use with the Mini After LGX Lite set.
Plastic part made of grey
Spare Cowling to use with the Mini After LGX Lite set.
Plastic part made of grey
PA12 Klicky Mount for Mini After LGX Lite
Klicky Mount to use with the Mini After LGX Lite set.
Plastic part made of grey
Klicky Mount to use with the Mini After LGX Lite set.
Plastic part made of grey
PA12 Mini After LGX Lite Main Plastic Set
Mini After LGX Lite plastic parts set to use with LGX Lite extruder on Voron
Mini After LGX Lite plastic parts set to use with LGX Lite extruder on Voron
PA12 Strain Relief Set for Mini After LGX Lite
Spare Strain Relief Set to use with the Mini After LGX Lite set.
Plastic part made
Spare Strain Relief Set to use with the Mini After LGX Lite set.
Plastic part made
Article 1 - 100 de 112