360°rotational servo

Artikelnummer: AC033
Kategorie: Motoren und Servos

9,26 €

inkl. 19% USt. , zzgl. (Paketversand Kleinteile)

Sofort verfügbar
Lieferzeit: 6 - 7 Werktage (DE - Ausland abweichend)

Stk

Beschreibung
Bewertungen

The signal terminal needs to be input one 50 HZ square wave, then the duration of high level pulse, which is used to control signal cycle, can control speed and forward/backward rotation as well as stalling. The duration of A high level corresponds to a speed. When high level is 1ms~1.5ms, servo rotates forward(the rotate speed is the fastest when it is 1ms, the later the lower, servo will stop rotating when reaching 1.5ms). When high level is 1.5 ~2ms, the servo rotates backward(The servo stops rotating when reaching 1.5ms, when the duration is closer to 2ms, the closer, the faster. The backward rotation speed is the fastest when reaching 2ms) This servo carries meso-position adjustment potentiometer(it can only be seen by peeling off the outer cover and circuit board). We can set high level pulse at 1.5ms to observe that whether servo stops rotating. If it doesn’t stop rotating, we keep adjusting the potentiometer until it does.Model: DS04-NFC,Applies to model airplane / Model car / robot,Weight: 38gDimensions: 40.8 x 20 x 39.5 mm ,Torque: 5.5kg/cm (at 4.8V),Speed: 0.22sec/60°(at 4.8V),Working voltage: 4.8v-6v,Temperature: 0?-60?,Current: < 1000mA

Versandgewicht:	0,05 kg
Artikelgewicht:	0,05 kg

Es gibt noch keine Bewertungen.

Kunden kauften dazu folgende Artikel:

MG995 metallic servo/55g servo for robot/all-metal gear

8,14 € *