25
Rubber
Perbunan® (NBR)
black
vulcanized onto the cover sheets
temperature 80 ° C
cover plates, threaded bushings
stainless steel
1.4301
Rubber
Perbunan® (NBR)
black
temperature resistant on mounting disc
vulcanized
120 ° C
mounting disc
stainless steel
1.4301
rubber, natural rubber (NR)
black
vulcanized onto the cover sheets
temperature 80 °
cover plates, threaded inserts, screws,
steel
zinc plated, blue passivated
rubber, natural rubber (NR)
black
vulcanized onto the cover sheets
temperature 80 °
cover sheets, galvanized threaded bushings, screws,
steel, blue passivated
Features:
Housing: Aluminum
- natural color anodised (ALN)
- black anodized (ALS)
dragonflies use Glass plastic body
filling: colorless transparent (K)
potting compound: mineral
sensitivity (Sens): 30 angular minutes, per 2mm Blasenweg
mounting flange for mounting (form A) or involved (form B)
Housing: Aluminum
- natural color anodised (ALN)
- anodized black (ALS)
dragonflies use:
Glass plastic body
filling: colorless transparent (K)
potting compound: mineral
The housing is provided at its lower diameter d3 with grooves. A fixation for. As by bonding is facilitated by
sensitivity (Sens). 30 angular minutes per 2mm Blasenweg
Aluminum (AL) highly polished
Plastic (KT) thermoplastic (Polyamide PA): temperature resistant up to 110 ° C
black, matt
Axle galvanized steel, blue passivated
Plastic, Duroplast (PF)
temperature resistant up to 110 ° C
black, shiny
axle: stainless steel, Material No. 1.4305, dull blasted
Plastic
thermosetting plastic (PF)
temperature resistant up to 110 ° C
Black, shiny
axle: galvanized steel, blue passivated
Thermoplastic (Polyamide PA): thermally stable up to 90 ° C
black, matt
axle
steel zinc plated, blue passivated
Thermoplastic (Polyamide PA): thermally stable up to 90 ° C
black, matt
Stainless Steel (NI)
stainless 1.4305
finely turned, download blank
axle
stainless
Material No. 1.4305
Thermoplastic (Polyamide PA): thermally stable up to 90 ° C
black, matt
Stainless Steel (NI)
Material No. 1.4305 finely turned, download blank
axle
stainless
Material No. 1.4305
,
Thermoplastic (Polyamide PA): thermally stable up to 90 ° C
black, matt
Aluminum (AL)
polished
axle
steel zinc plated, blue passivated
rubber, natural rubber (NR)
black
vulcanized onto the cover sheets
temperature 80 ° C
cover plates, threaded inserts, screws
stainless steel
stainless
1.4301
Plastic (KT)
Thermoplastic (Polyamide PA): thermally stable up to 90 ° C
black, matt
rotatable
Retractable mechanism Stainless
axle
Material No. 1.4305
Attachment
Sintered steel
SteelNI 1.4404
Head
stainless steel
(sintered steel)
SteelNI 1.4404
matt blasted
bolt
stainless steel
stainless 1.4301 secured
matt blasted
screwed and cross pin
adjusting plates GN 2277.1 are used in combination with circular bubbles GN 2277, Form A
Consisting of:. Stainless steel, Material No. 1.4305
By offset by 120 ° are arranged fixing holes, the circular bubbles and the mounting plate may be aligned to the mounting surface.
An alignment ball on the underside of adjustment plate acts as a tilting point.
knobs GN 676.5 are used as control panel for pulling or pushing movements
The version with knurled (Form B), can be used as shapely knurled nut with blind hole thread. "
stainless steel, Material No. 1.4305, matt, blasted
stainless steel
(sintered steel)
SteelNI 1.4404
matt blasted
Duroplast (PF)
temperature resistant up to 110 ° C
black, shiny
Set screw
steel zinc plated, blue passivated
Plastic
thermosetting plastic (PF)
temperature resistant up to 110 ° C
Black, shiny
polyamide socket pressed
plastic, thermoplastic (polyamide PA)
glass fiber reinforced
temperature resistant up to 130 ° C
black gray, RAL 7021, matt
red, RAL 3000, matt
yellow, RAL 1021, matt
blue, RAL 5024, matt
gray, RAL 7035, matt
threaded pin: steel, zinc plated, blue passivated
threaded bushing: brass
Duroplast (PF)
temperature resistant up to 110 ° C
black, shiny
terminal
stainless steel
stainless 1.4305
thermosetting plastic (PF)
temperature resistant up to 110 ° C
Black, shiny
female
brass
Thermoplastic (Polyamide PA):
strengthened temperature resistant up to 130 ° C
black, matt
jack
stainless
Material No. 1.4305
Thermoplastic (Polyamide PA):
strengthened temperature resistant up to 130 ° C
black, matt
jack
brass
thermoplastic (Polyamide PA)
reinforced
temperature resistant
to 130 ° C
black, matt
bolt
stainless steel
Material No. 1.4305
Duroplast (PF)
temperature resistant up to 110 ° C
black, shiny
Set screw
stainless
Material No. 1.4305
Plastic
thermosetting plastic (PF)
temperature resistant up to 110 ° C
Black, shiny
threaded pin
steel
galvanized and passivated blue
steel, finely turned, burnished
The flat knobs GN 75 are characterized by their compact and timeless design.
Stainless steel 1.4301, dull blasted
Thermoplastic (Polyamide PA): glass fiber reinforced
temperature resistant up to 130 ° C
black, matt
Set screw
Galvanized steel, blue passivated
or stainless steel
Material No. 1.4305
knobs GN 676.1 are used as control panel for pulling or pushing movements
The version with knurled (Form B), can be used as a knurled nut
. burnished steel,
plastic
Duroplast (PF)
temperature resistant up to 110 ° C
black, shiny
plastic, thermosetting plastic (PF)
temperature resistant up to 110 ° C
Black, shiny
Form D:
female, brass
form e:
threaded stud, steel, zinc plated, blue passivated
Plastic (KT)
Thermoplastic (Polyamide PA): thermally stable up to 90 ° C
black, matt
rotatable
Retractable mechanism
axle
Steel 1.0718, browned
Attachment
Sintered steel, burnished
Plastic (KT)
Thermoplastic (Polyamide PA): thermally stable up to 90 ° C
black, matt
rotatable
Retractable mechanism Stainless
axle
Material No. 1.4305 Attachment
Sintered steel
SteelNI 1.4404
Silicone rubber
Elastosil® (MVQ)
FDA compliant
gray
vulcanized onto the cover sheets
temperature resistant up to 200 ° C
cover plates, threaded inserts
stainless steel
1.4301
Plastic (KT)
Thermoplastic (Polyamide PA): thermally stable up to 90 ° C
black, matt
rotatable
Retractable mechanism
steel burnished