BMG-X2-M Extruder For Mosquito

Numéro d'article: BT-EXT-BMGX2-M
catégorie: extrudeuse

BMG-X2-M Extruder For Mosquito
The Bondtech BMG-X2 is the best and lightest performing extruder on the market that combines

160,65 €

inclus 19% TVA , plus (Paketversand bis 1m)

Available, please note the delivery time
Temps de livraison: 21 - 22 jours ouvrables À l'étranger

Description
Évaluations

BMG-X2-M Extruder For Mosquito

BMG-X2-M Extruder For Mosquito
The Bondtech BMG-X2 is the best and lightest performing extruder on the market that combines - Freight Weight. 515
Dimensions: 9.5 × 13.5 × 6 cm
The Bondtech BMG-X2 is the best and lightest performing extruder on the market that combines low weight with dual high feeding capacity.
Dedicated For Mosquito Hotends
This extruder is available in a single version, to use Mosquito hotends. The same version is also compatible with Mosquito Magnum.
Both have a C-C distance of 15mm.
SLS 3D Printed Housing in PA
The housing parts are professionally SLS printed in nylon for maximum strength and precision.
For 1.75mm Filaments only

Description
Additional information
About the e-steps
Mounting Guide
Reviews (0)
The Bondtech BMG-X2-M is based on our proven
BMG™
design that utilizes an internal gearing ratio of 3:1 together with precision cnc-machined hardened steel drive gears to give you a compact powerhouse for all your multi extrusion applications. Whether you require high resolution prints with small nozzles or high-flow prints with big nozzles the optimized gearing ratio combined with our industry leading drive gears provides unparalleled pushing power and lightning fast retractions in a lightweight and compact dual extrusion package.
Fit For Mosquito Hotends
New version is dedicated to be used with Mosquito hotends. Attach Slice Engineering high performance hot ends to our high performance extruders and enjoy the best filament extrusion solution in the market.
NOTICE
The following parts are NOT included in this product: Alu Mounts; Hotends; Heaters, Thermistors, and their Cables.

To use this Bondtech Extruder, you will also need to buy the following
a
Mosquito Hotend
or a
Mosquito Magnum Hotend
for higher material flow;
the
Boron Nitride Paste
;
the
Mosquito Thermistor
;
the
Mosquito 12v 50w Heater Cartridge
or the
Mosquito 24v 50w Heater Cartridge
;
Optional items
one or more
Vanadium Nozzles
;
a
Mosquito 12v fan
or a
Mosquito 24v fan
to cool down the hotend;
a
1.5Nm Torque Wrench
to properly tighten the nozzle(s).
Included Stepper Motors
The included high power Nema17 pancake motors provides high torque and a low weight.
We use, and recommend using, the following stepper motor with this extruder:
NEMA17 Pancake Stepper Motor 25mm
Basic description and datasheet can be found in its page.
Bondtech Dual-Drive
Our unique Dual-Drive technology delivers uninterrupted material flow without fear of grinding or slipping in even the most demanding conditions. Bondtech users the world over will attest that even in prints with thousands of retracts our extruders perform flawless, with unmatched precision, and zero damage or degradation to the filament.
Multi-material Capability
Our new
BMG™
extruder feeds all material with high reliability, from slippery nylons and soft TPU/TPE filaments to highly rigid and sometimes brittle carbon-filled high-strength materials. The extruder is designed for 1.75 mm filaments, but has been tested to ensure performance of filament from 1.5mm up to 2.0mm allowing for high reliability regardless of the tolerance of the filament used. The filament path is fully guided throughout the extruder body and the housing maintains tight tolerances to the drive gears mitigating the chances of Filament misfeed when the hotend experiences increased back pressure or highly flexible filaments are used.
Adjustable Tension
The thumbscrew tensioners allows the user to fine-tune the pressure exerted by the drive gears onto the filament. This gives you the power to adjust according to your preferences and to optimize for the type of material you are using.
Quick-Release
To be able to do material changes in a snap, simply activate the Quick-Release lever to release the tension and pull the material to be changed out of the extruder, keep it activated and insert the new material.
Flexible Mounting Options
Our standard mounting bracket in CNC machined aluminum can be used to mount the extruder as on the photos or a simple 3d printed bracket can be used. You can download a cad or stl-file of the extruder that gives you the dimensions you need in order to design your custom mounting bracket.
The extruder is delivered without mounts. If you need the ALU mounts please remember to add them to your cart.
Additional Info
Total weight when installed (including Alu Mounts; Mosquito hotends, Thermistors; Heaters; Cables; Nozzles): 660g
E-step value: 415

Poids de livraison:	0,52 Kg
Poids de l'article:	0,52 Kg

#product rating.noReviewsInAllLang#