50
Rubber
Perbunan® (NBR)
black
vulcanized onto the cover sheets
temperature 80 ° C
cover plates, threaded bushings
stainless steel
1.4301
rubber, natural rubber (NR)
black
vulcanized onto the cover sheets
temperature 80 °
cover plates, threaded inserts, screws,
steel
zinc plated, blue passivated
rubber, natural rubber (NR)
black
vulcanized onto the cover sheets
temperature 80 °
cover sheets, galvanized threaded bushings, screws,
steel, blue passivated
Bezugsflansche GN 723.3 are used in connection with knobs GN 723.4
Aluminum: anodized, black
Reference arrow: white, engraved with laser precision
clamping ring: rubber
friction ring: polyamide (only type A)
Features:
Housing: Aluminum
- natural color anodised (ALN)
- black anodized (ALS)
dragonflies use Glass plastic body
filling: colorless transparent (K)
potting compound: mineral
sensitivity (Sens): 30 angular minutes, per 2mm Blasenweg
mounting flange for mounting (form A) or involved (form B)
Plastic, Duroplast (PF)
temperature resistant up to 110 ° C
black, shiny
axle: stainless steel, Material No. 1.4305, dull blasted
Plastic
thermosetting plastic (PF)
temperature resistant up to 110 ° C
Black, shiny
axle: galvanized steel, blue passivated
rubber, natural rubber (NR)
black
vulcanized onto the cover sheets
temperature 80 ° C
cover plates, threaded inserts, screws
stainless steel
stainless
1.4301
adjusting plates GN 2277.1 are used in combination with circular bubbles GN 2277, Form A
Consisting of:. Stainless steel, Material No. 1.4305
By offset by 120 ° are arranged fixing holes, the circular bubbles and the mounting plate may be aligned to the mounting surface.
An alignment ball on the underside of adjustment plate acts as a tilting point.
Plastic
thermosetting plastic (PF)
amplified
temperature resistant up to 110 ° C
hub terminal
steel, blackened
threaded bush
brass
handles GN 598
plastic, thermoset
axle steel
zinc
Knob Plastic Technopolymer (Polyamide PA) glass fiber reinforced, matt
Sight glass plastic (Polyamide PA-T): transparent, durable, impact resistant
knob and window:
- temperature-resistant up to 100 ° C
- oil- and solvent-resistant (but not resistant to alcohol)
pointer: plastic
- long pointer: red
- short pointer: black
Dial: aluminum, matt anodised
graduations and figures black
bush: steel, burnished
IP 67 protection
Body:
plastic, thermoplastic (polypropylene PP)
sheathed with a soft elastomer (TPE)
70 Shore A
temperature 80 ° C
black gray, matte RAL 7021
Softline lagging:
chemically bonded to the plastic core
female
steel, blackened
Color cap:
black gray, RAL 7021, matt
orange, RAL 2004, matt
gray, RAL 7035, matt
yellow, RAL 1021, matt
blue, RAL 5024, matt
red, RAL 3000, matt
plastic
thermoplastic (Polyamide PA)
temperature resistant up to 90 ° C
black, shiny
terminal
brass
Plastic
thermosetting plastic (PF)
temperature resistant up to 110 ° C
Black, shiny
polyamide socket pressed
thermosetting plastic (PF)
temperature resistant up to 110 ° C
Black, shiny
female
brass
Thermoplastic (Polyamide PA):
strengthened temperature resistant up to 130 ° C
black, matt
jack
brass
plastic, thermoplastic (polypropylene PP)
sheathed with a soft elastomer (TPE)
70 Shore A
temperature 80 ° C
black gray, matte , similar to RAL 7021
Softline lagging
chemically bonded to the plastic core
female brass
Possible colors of the cap:
transparent (DTR)
orange (DOR), RAL 2004, matt
gray (DGR), RAL 7035, matt
yellow (DGB), RAL 1021, matt
blue (DBL), RAL 5024, matt
red ( DRT), RAL 3000, matt
aluminum, anodized black
wedge: Brass
Adjustable hand levers (Form H):
black, RAL 9005, textured finish
adjusting lever (form H): stainless steel, 1.4305
Allen-adjustment screw (Type S): stainless steel, 1.4305
the clamping element can be mounted so that the position of the clamping lever or the clamping screw is on the left or the right.
GN 711.1 reference arrows are available that can be attached to the periphery of the clamping element.
Thermoplastic (Polyamide PA): impact resistant
black, matt
jacks
Tempered steel
nitrided, blackened
Duroplast (PF)
black, shiny
jack
steel
zinc plated, blue
Thermoplastic (Polyamide PA): impact resistant
black, matt
jack
Galvanized steel, blue passivated
Thermoplastic, thermosetting plastic or cast iron
screw
steel zinc plated, blue passivated
Pipe DIN 2391, steel, chrome-plated (SCR)
Trapezoidal thread spindle: steel, ball bearing
Guide nut: gunmetal
End plug: plastic
Pipe DIN 2391, steel, chrome-plated (SCR)
Trapezoidal thread spindle: steel, ball bearing
Guide nut: gunmetal
End plug: plastic
Silicone rubber
Elastosil® (MVQ)
FDA compliant
gray
vulcanized onto the cover sheets
temperature resistant up to 200 ° C
cover plates, threaded inserts
stainless steel
1.4301
Steel:
- knurled milled
- Skalieransatz d1 finely turned
- satin chrome plated, without scale (MCR)
- satin chrome plated, with standard scale, engraved with laser precision, offset in black (MCRS)
scale 0 ... 90, 100 divisions, corr. scaling scheme d1 / 100A RA 0-10 20 ... 90 / 13Spannring rubber
friction ring Polyamid®
aluminum, anodized natural color
arrow (Type A) and scale (Type S 0 ... 9, 40 or 100 divisions): black printed
scale rings GN 526.1 are supplied unassembled so separately; per ring 3 matching grooved pins are enclosed
To adjust the knob GN526. (sold separately; not included).
Body:
plastic, thermoplastic (polypropylene PP)
sheathed with a soft elastomer (TPE)
70 Shore A
temperature 80 ° C
black-gray, matt RAL 7021
Softline lagging:
chemically bonded to the plastic core
bush:
stainless steel, material No. 1.4305
Color of the cap:
- black-gray, RAL 7021, matt
- orange, RAL 2004, matt
- gray, RAL 7035, matt
- yellow, RAL 1021, matt
- blue, RAL 5024, matt
- red, RAL 3000, matt
plastic, thermoplastic (polypropylene PP)
sheathed with a soft elastomer (TPE)
70 Shore A
temperature 80 ° C
black gray, matte , similar to RAL 7021
Softline lagging
chemically bonded to the plastic core
versions
- with threaded rod: steel, zinc plated, blue passivated
- with socket: brass