3DSolex Matchless 2.85mm nozzle. Size: 2.00

Numéro d'article: BT-7072482001861
catégorie: Nozzles

20,53 €

inclus 19% TVA , plus (Paketversand bis 1m)

Available, please note the delivery time
Temps de livraison: 20 - 21 jours ouvrables À l'étranger

Description
Évaluations

3DSolex Matchless 2.85mm nozzle. Size: 2.00

3DSolex Matchless 2.85mm nozzle. Size: 2.00 - Freight Weight. 50
Dimensions: 5.8 × 3.5 × 1.1 cm
Core Heating Technology
This nozzle will fit a large number of printers and hot-ends.
Drop-in compatibility to replace many other nozzles.
Features
Uses Core Heating technology to increase the melt zone
Longer threading to increase heat transfer
1 unit per pack
Available in sizes from 0.25 to 2.0mm
Advantages
Higher melt flow, up to 50% more
Use lower temperatures in your print profiles, or
Work with thicker layers or/at higher speeds
Machined with precision

Description
Additional information
Reviews (0)
Core Heating Technology Explained
Existing hot-ends and nozzles melt the filament from the outside in. The coldest part of the filament, at the core, is the one being pushed and reaching the tip of the nozzle faster.
With Core Heating Technology we melt the interior of the filament first. Compared with standard nozzles, this brings the following advantages:
less temperature is required to successfully process the material
print with much bigger nozzles, up to 2.0 mm
print with higher layers and/or faster speeds
The 0.25mm nozzles in this product line are not enabled with Core Heating technology .
Compatibility
This nozzle is compatible with the following printers and hot-ends:
Olsson block
Ultimaker 2+
3DSolex V3 Matchless block
Various E3D hot-ends
and many other printers

This nozzle has a M6x1 threading and 12.5mm in length.
Recommended for
Use this nozzle with the following materials:
PLA
ABS
HIPS
PC
TPU
TPE
Nylon
PETG
ASA
PP
PVA
For technical and abrasive materials we recommend to use other nozzles in our range.
Different nozzle sets for different materials
We recommend you to have several sets of nozzles because:
Using different materials with the same nozzles causes deposit build-up inside the nozzle.
These deposits will cause blockages.
We recommend changing nozzles when changing materials.

Poids de livraison:	0,05 Kg
Poids de l'article:	0,05 Kg

#product rating.noReviewsInAllLang#