16
Aluminum
Hub machined
Rim turned and polished
raw surfaces blasted
concentricity and runout
of the rim <0.4
Cast iron (GG)
- Hub machined
- Wheel rim turned and polished
or
Aluminum (AL)
-Hub machined
-wheel rim turned and polished
-unprocessed surfaces blasted
Concentricity and axial run-out deviation of the wheel rim < 0,4
Versions:
Without handle (A)
With fixed ball handles DIN39 (F)
With rotatable palm grips DIN98 (D)
Steel, nitrated
Running surfaces ground or PTFE-coated
Handle body: Die-cast zinc, plastic-coated
Colours:
- black, RAL 9005, textured matt (SW)
- silver, RAL 9006, textured matt (SR)
Hub cap: Plastic, black for SW or light gray for SR
Countersunk screw: Stainless steel, chemically blackened for SW or bright for SR
Screw insert: Stainless steel, rustproof, 1.4305
black, RAL 9005, textured finish
Clamping bores machined
Cap screws DIN 912:
Stainless steel 1.4301
Hex nuts DIN 985:
Stainless steel 1.4301
Clamping bores machined
Cap screws DIN 912:
stainless
1.4301 Hex nuts DIN 985:
stainless
1.4301
Steel:
- knurled milled
- Skalieransatz d1 finely turned
- satin chrome plated, without scale (MCR)
- satin chrome plated, with standard scale, engraved with laser precision, offset in black (MCRS)
scale 0 ... 90, 100 divisions, corr. scaling scheme d1 / 100A RA 0-10 20 ... 90 / 13Spannring rubber
friction ring Polyamid®
Steel, burnished
Ball knob DIN319: Plastic, Duroplast, black, glossy
Steel, burnished
Ball knob DIN319: Plastic, Duroplast, black, glossy
Steel, burnished
Ball knob DIN319: Plastic, Duroplast, black, glossy
steel, bare
Aluminium:
- Hub machined
- Wheel rim turned on all sides
Concentricity and axial runout of the wheel rim < 0,4
Wheel body:
- Wheel rim highly polished
- unprocessed surfaces blasted
Rotatable cylindrical handles GN798:
- plastic, thermoplastic, black, matt
- axle part steel, zinc-plated, blue passivated
Aluminium:
- Hub machined
- Wheel rim turned on all sides
Concentricity and axial runout of the wheel rim < 0,4
Wheel body:
- Wheel rim highly polished
- unmachined surfaces blasted
Rotatable cylindrical handles GN 598: Steel, plastic-coated, black, textured mattWith plain bearing
Wheel body made of aluminium:
- Wheel rim turned on all sides and highly polished
- Unprocessed surfaces plastic-coated, black, textured matt
Coupling elements: Steel, hardened, treads ground
Cover cap: Plastic, light gray
Rotatable cylindrical handles GN598: Steel, plastic-coated, black, textured matt
Shaft part steel: zinc-plated, blue passivated
With needle bearing
edited
Rim turned on all sides Concentricity and axial run
the rim <0.4
Wheel center
highly polished rim
blasted unfinished surfaces
Revolving handles GN 798
plastic, thermoplastic black, matt
axle steel zinc plated, blue passivated
Aluminum
- Hub machined
- Wheel rim turned and polished on all sides
- Unmachined surfaces blasted
Concentricity and axial runout of the wheel rim < 0,4
Foldable handles GN798.3: Plastic, thermoplastic, black, matt, rotatable
Foldable mechanism: Steel, burnished
Aluminium:
- Hub machined
- Wheel rim turned on all sides
Concentricity and axial runout of the wheel rim < 0,4
Wheel body:
- Wheel rim highly polished
- unmachined surfaces blasted
Rotating cylindrical handles GN 598: Steel, plastic-coated, black, textured matt
With plain bearing
Aluminum
- Hub machined
- Wheel rim turned and polished on all sides
- Unmachined surfaces blasted
Concentricity and axial runout of the wheel rim < 0,4
Foldable handles GN798.7: Plastic, thermoplastic, black, matt, rotatable
Foldable mechanism:
- Axle part: Steel 1.0718, burnished
- Attachment: Sintered steel, burnished
Aluminum
- Hub machined
- Wheel rim turned on all sides
Run-out and axial run-out deviation of the wheel rim < 0,4
Wheel body completely plastic-coated, black, textured matt <
> Rotating cylindrical handles GN 798 (plastic, thermoplastic, black, matt)
Disc handwheels GN323 have recessed grips on the back
Aluminium:
- Hub machined
- Wheel rim turned on all sides
Concentricity and axial run-out deviation of the wheel rim < 0,4
Wheel body: completely plastic-coated, black, textured matt
Revolving cylindrical handles GN 598: Steel, plastic-coated, black, textured matt
With plain bearing
Hub
edited
Rim turned on all sides Concentricity and
Runout
the rim <0.4
Wheel center completed
plastic coated
black, textured finish
Revolving handles GN 798
plastic, thermoplastic black, matt
axle steel zinc plated, blue passivated
Wheel body: Aluminum
- Wheel rim turned on all sides and highly polished
Coupling elements: Steel, nitrated
- Running surfaces ground or PTFE-coated
- Bearing flange burnished, fixed
Rotatable cylinder handles GN598: Plastic, Duroplast, black, glossy
Axle part: Steel, zinc-plated, blue passivated
matt, vibration (MT)
anodized black (ELS)
Cap screws DIN 912:
stainless
1.4301
Plastic
thermosetting plastic (PF)
amplified
temperature resistant up to 110 ° C
hub terminal
steel, blackened
threaded bush
brass
handles GN 598
plastic, thermoset
axle steel
zinc
plastic
Duroplast (PF)
reinforced
temperature resistant up to 110 ° C
Hub bush
stainless steel
Material No. 1.4305
Plastic: duroplastic (PF), reinforced, temperature-resistant up to 110 °C, black, glossy
Flashing: polished
Hub bush: steel, burnished
Reversible handles: Plastic, Duroplast, black, glossy, rotatable
Reversible mechanism: Steel, burnished
Plastic thermoplastic (polypropylene PP), reinforced, impact-resistant, temperature-resistant up to 80 °C, black, matt
Hub bush: steel, burnished
Cover: <
> - Plastic, black with d1 = 80
- Plastic, light gray with d1 > 80
Reversible handle: Plastic, thermoplastic (polyamide PA) black, matt, rotatable
Reversible mechanism / axle part: Steel, burnished
Wheel body Plastic, thermoplastic (polyamide PA), reinforced, impact-resistant, temperature-resistant up to 100 °C, black, matt
Hub bush: steel, burnished
MS- Threaded socket for screwing in the cylindrical handle
Rotating cylindrical handles: plastic, thermoplastic black, matt
Threaded pin DIN 916 with hexagon socket and cup point
reinforced, impact resistant
temperature 80 ° C
black, matt
Hub bush
Steel, blackened
Threaded bushing
brass
Rotatable cylindrical handle
Plastic, thermoplastic (Polyamide PA): black, matt
axle steel zinc plated, blue passivated
Plastic, thermoplastic (polypropylene PP), reinforced, impact-resistant, temperature-resistant up to 80 °C, black, matt
Hub bush: steel, burnished
Reversible handles: plastic , thermoplastic (polyamide PA) black, matt, rotatable
folding mechanism: steel, burnished
Plastic, thermoplastic (PP), FDA certified, reinforced, impact-resistant, temperature-resistant up to 80 °C, black, matt
Reversible handles: plastic, thermoplastic (PA) , FDA certified, black, matt, rotatable
folding mechanism, hub bushing and cover: stainless steel, rustproof 1.4301hub cover: self-adhesive
Thermoplastic (polypropylene PP)
reinforced, impact resistant
temperature 80 ° C
black, matt
Hub bush
Steel, blackened
MS-threaded socket for
accept the revolving handle
Housing for position indicator thermoplastic (Polyamide PA): glass fiber reinforced
Screenplays. Cylindrical handles
Black plastic
Screw DIN 916
with hexagon socket and serrated
Plastic, thermoplastic (polyamide PA)
- glass fiber reinforced
- temperature resistant up to 120 °C
- black, shiny
hub: steel, burnished
strengthened temperature resistant up to 110 ° C
black, shiny
Pressgrat clean polished
Hub bush
Steel, blackened
Threaded bushing
brass
70 Shore A
temperature 80 ° C
transparent
Adhesive film
Acrylate dispersion, solvent-free
aggressive adhesive
Die-cast aluminium:
- machined hub
- wheel rim turned
- plastic-coated
colours:
- black, RAL 9005, textured matt
- silver, RAL 9006, textured matt
Concentricity and axial runout deviation of the wheel rim < 0,4
Reversible handles GN 798.3: Plastic, thermoplastic, black, matt
Reversible mechanism : Steel, blued
Die-cast aluminum
- Machined hub
- Turned wheel rim
- Plastic-coated
Colours:
- Black, RAL 9005, textured matt
- silver, RAL 9006, textured matt
concentricity and axial run-out deviation of the wheel rim < 0,4
folding handles GN798.7: plastic, thermoplastic, black, matt
folding mechanism: steel, burnished
Hub
edited
Rim turned plastic coated
black, RAL 9005, textured finish
silver, RAL 9006, textured finish
Concentricity and axial run
the rim <0.4
Revolving handles GN 798.2
plastic, thermoplastic black, matt
axle steel zinc plated, blue passivated
Die-cast aluminum
- Machined hub
- Turned wheel rim
- Plastic-coated
Colours:
- Black, RAL 9005, textured matt
- silver, RAL 9006, textured matt
concentricity and axial run-out deviation of the wheel rim < 0,4
folding handles GN798.3: plastic, thermoplastic, black, matt
folding mechanism: steel, burnished
Die-cast aluminum
- Machined hub
- Turned wheel rim
- Plastic-coated
Colours:
- Black, RAL 9005, textured matt
- silver, RAL 9006, textured matt
concentricity and axial run-out deviation of the wheel rim < 0,4
folding handles GN798.7: plastic, thermoplastic, black, matt
folding mechanism: steel, burnished
Hub
edited
Rim turned and polished
Concentricity and axial run
the rim <0.4
aluminum and anodized black
Stainless steel screw DIN 916 with internal hexagon and serrated
Lid: plastic, light gray