Stainless steel
Guide tube:
Tube DIN 2391, steel, chrome-plated (SCR) or
Tube DIN 2462, stainless steel, 1.4301 (NI) <
>
Shaft: Steel or stainless steel with ball bearings
End plug: Plastic
arresting GN200 and simplify complex partial and indexing devices, such as shift lever, latches, index pins and other safety elements
Material:
- Steel
or
- stainless steel (NI), Material No. 1.4305
versions:
Type A: knob without scale (with steel variant: burnished)
Type AS: knob scale engraved with laser precision, reference line on locking (for steel version: satin chrome and black deposed)
form B: lever with one lever, bürniert (only in steel version available)
form C: Rocker with two adjustment levers, burnished (available only in steel design)
keyway P9 DIN 6885:
sheet 1 for bore K10
sheet 2 for drilling> K10
Fixed cylindrical handles GN539 (plastic, thermoplastic black , shiny) (only form B and C)
Stainless Steel (NI)
- thickness 0.6 mm
- scale etched
plastic (KUS)
- Strength 0 , 3mm
- silver deposited
- printed scale
Plastic, Duroplast (PF)
temperature resistant up to 110 ° C
black, shiny
axle: stainless steel, Material No. 1.4305, dull blasted
Thermoplastic (Polyamide PA): thermally stable up to 90 ° C
black, matt
Stainless Steel (NI)
Material No. 1.4305 finely turned, download blank
axle
stainless
Material No. 1.4305
,
Turntable: stainless steel, 1.4305
Other components: steel (partially galvanized) or brass
Knob: aluminum, black anodized
stainless steel 1.4301, dull blasted
scale (Type S) and arrow (Type A) engraved with laser precision
Stainless steel screw DIN 916 with internal hexagon and serrated point
stainless steel
1.4301
matt blasted
tag (Form M) engraved with laser precision
Stainless steel screw DIN 916 with internal hexagon and serrated point
Leverage:
Stainless steel (investment casting), stainless 1.4308
axis tension nut
adjusting nut and screw (only type A)
stainless steel, stainless 1.4305
Contact plate:
Type A:
plastic (polyacetal POM), glass fiber reinforced
form B:
plastic (polyamide PA) glass fiber reinforced,
Leverage:
Stainless steel (investment casting), stainless 1.4308
axis lag screw
adjusting nut and screw (only type A)
stainless steel, stainless 1.4305
Contact plate
stainless steel, stainless 1.4057, hardened
stainless steel 1.4301, blasted
axle
Stainless steel 1.4021, heat-treated
Seeger ring:
Stainless Steel 1.4310
plastic cap:
red
oil resistant
temperature resistant up to 60 ° C
advantage: tightening action in any angular position equal and self-locking
The measure. b2 is tuned to the 444.2 head height of bolts DIN 444 and eye nuts GN.
adjusting plates GN 2277.1 are used in combination with circular bubbles GN 2277, Form A
Consisting of:. Stainless steel, Material No. 1.4305
By offset by 120 ° are arranged fixing holes, the circular bubbles and the mounting plate may be aligned to the mounting surface.
An alignment ball on the underside of adjustment plate acts as a tilting point.
knobs GN 676.5 are used as control panel for pulling or pushing movements
The version with knurled (Form B), can be used as shapely knurled nut with blind hole thread. "
stainless steel, Material No. 1.4305, matt, blasted
stainless steel
- Eccentrical: Material No. 1.4305, Electroless nickel
- Bolt and washer: stainless, 1.4542, tempered
- Ball control: non-corrosive, 1.4305, dull blasted
ball knob DIN 319
plastic
thermoset
black, shiny
In connection with clamping bars recommended the use of ball screws GN 605 with flattened ball.
stainless steel
- Eccentrical: Material No. 1.4305, Electroless nickel
- Bolt and washer: stainless, 1.4542, tempered
- Ball control: non-corrosive, 1.4305, dull blasted
ball knob DIN 319
plastic
thermoset
black, shiny
In connection with clamping bars recommended the use of ball screws GN 605 with flattened ball.
stainless steel
- Eccentrical: Material No. 1.4305, Electroless nickel
- Bolt and washer: stainless, 1.4542, tempered
- Ball control: non-corrosive, 1.4305, dull blasted
ball knob DIN 319
plastic
thermoset
black, shiny
Stainless Steel NI sintered steel stainless 1.4404
Cap screw DIN 912 Stainless steel 1.4301
Stainless Steel NI sintered steel stainless 1.4404
Cap screw DIN 912 Stainless steel 1.4301
Damping disk:
Elastomer (PUR)
70 Shore A
temperature 80 ° C
transparent
Head screw to DIN 912:
stainless
1.4301
Head screw to DIN 912:
stainless
1.4301
Head screw to DIN 912:
stainless
1.4301
Damping disk:
Elastomer (PUR)
70 Shore A
temperature 80 ° C
transparent
Head screw to DIN 912:
stainless
1.4301
sintered steel stainless 1.4404
Rail profile and balls: stainless steel, rustproof, 1.4301
Ball cage, outer rail: plastic
Ball cage, inner rail: stainless steel, rustproof, 1.4301
Rubber stop and separating function: plastic / Elastomer
Lubricant: Roller bearing grease, FDA-compliant
Operating temperature -20 °C to 100 °C
Plastic, thermoplastic (polyamide PA)
- glass fiber reinforced
- temperature resistant up to 100 °C
- black, matt
bushing: steel, burnished or stainless steel, rustproof, 1.4305
Threaded pin: DIN 916 with hexagon socket and cup point, steel or stainless steel, rustproof, 1.4301
Plastic, thermoplastic (PP), FDA certified, reinforced, impact-resistant, temperature-resistant up to 80 °C, black, matt
Reversible handles: plastic, thermoplastic (PA) , FDA certified, black, matt, rotatable
folding mechanism, hub bushing and cover: stainless steel, rustproof 1.4301hub cover: self-adhesive
Leverage:
Zinc Die Cast
plastic coated (abrasion resistant epoxy resin)
Possible colors:
- black, RAL 9005
- orange, RAL 2004
- red, RAL 3000
- silver, RAL 9006
axis lag screw:
adjusting nut and screw (only type A)
stainless steel, stainless 1.4305
Contact plate:
Type A:
thermoplastic (polyacetal POM), glass fiber reinforced
form B:
thermoplastic (polyamide PA) glass fiber reinforced
Form A:. Spring steel, stainless steel
With claws spring washers GN 509.3, Form A ball rolls can be mounted on the installation side and dismantled
Shape B: spring steel, galvanized
Pink rings GN 509.3, form B are mounted from the back.
fixed ball transfer units are no longer removable. Regarding the plate thickness is not limited.
Stainless steel 1.4301, dull blasted
aluminum, anodized black
wedge: Brass
Adjustable hand levers (Form H):
black, RAL 9005, textured finish
adjusting lever (form H): stainless steel, 1.4305
Allen-adjustment screw (Type S): stainless steel, 1.4305
the clamping element can be mounted so that the position of the clamping lever or the clamping screw is on the left or the right.
GN 711.1 reference arrows are available that can be attached to the periphery of the clamping element.
SBL:
Housing: steel, turned, zinc-plated, blue passivated
Ball: steel, bare
SNI:
housing: steel, turned, zinc-plated, blue passivated
ball: stainless steel, stainless, 1.4034
NNI:
housing: stainless steel, 1.4028 and Material No. 1.4305 (only size 15)
ball: stainless steel, stainless, 1.4034
Variant SBL:
Housing: sheet steel, zinc plated, blue passivated
Ball: steel, bare
variant SKU:
housing: sheet steel, zinc plated, blue passivated
ball: plastic (polyacetal POM)
variant SNI:
housing: sheet steel, zinc plated, blue passivated
ball: stainless steel, stainless, 1.4034
variant NNI:
housing: stainless steel sheet 1.4301
ball: stainless steel, stainless, 1.4034