Upgrade Kits
Artikel 1 - 50 von 112
LGX TPE Lever Grip
Spare part made of TPE to replace the Lever Grip on a Bondtech LGX™ Large
Spare part made of TPE to replace the Lever Grip on a Bondtech LGX™ Large
DDX Thermistor Adapter 3.0 mm
Use this adapter set to fit the Creality original Thermistor into a Copperhead™ or Mosquito™
Use this adapter set to fit the Creality original Thermistor into a Copperhead™ or Mosquito™
LGX Mounting Accessories
Spare parts set for the Bondtech LGX™ Large Gears eXtruder with:
3x M3x30 Low
Spare parts set for the Bondtech LGX™ Large Gears eXtruder with:
3x M3x30 Low
LGX Air-Cooled Cold Block Mounting Hardware
Compatible with "LGX™ Black Anodized Aluminum Heat Sink" and
LGX™ Black Anodized Aluminum Air Cooled Cold
Compatible with "LGX™ Black Anodized Aluminum Heat Sink" and
LGX™ Black Anodized Aluminum Air Cooled Cold
Assembly kit Ultimaker 2. Assembly kit for Ultimaker 2 mount, contains a vibration dampening plate in 3D printed TPU
FDM Sensor Spacer for Creality CR-10 V2
LGX Direct Drive Interface Plug
Spare part made of PA12 to replace the Direct Drive Interface Plug on a Bondtech
Spare part made of PA12 to replace the Direct Drive Interface Plug on a Bondtech
LGX Bowden Interface Plug
Spare part made of PA12 to replace the Bowden Interface Plug on a Bondtech LGX™
Spare part made of PA12 to replace the Bowden Interface Plug on a Bondtech LGX™
DDX Adapter For CR-10/Ender Hotend
Use the CR-10 or Ender stock hotend with the Bondtech DDX.
Part made of PA12 (Nylon)
Use the CR-10 or Ender stock hotend with the Bondtech DDX.
Part made of PA12 (Nylon)
DDX Adapter For Micro Swiss All-Metal
Use a Micro Swiss All Metal hotend with the Bondtech DDX.
Part made of PA12 (Nylon)
Use a Micro Swiss All Metal hotend with the Bondtech DDX.
Part made of PA12 (Nylon)
The X-Carriage kit is required to install our Bondtech Extruder Upgrade Kit for Prusa i3 MK3S (BT-EXT-KIT-68).
PA12 Klicky Mount for Mini After LGX Lite
Klicky Mount to use with the Mini After LGX Lite set.
Plastic part made of grey
Klicky Mount to use with the Mini After LGX Lite set.
Plastic part made of grey
PA12 Strain Relief Set for Mini After LGX Lite
Spare Strain Relief Set to use with the Mini After LGX Lite set.
Plastic part made
Spare Strain Relief Set to use with the Mini After LGX Lite set.
Plastic part made
SLS Copperhead BL Touch Mount For DDX
Mount a BL Touch bed levelling sensor onto the DDX.
Part made of PA12 (Nylon) with
Mount a BL Touch bed levelling sensor onto the DDX.
Part made of PA12 (Nylon) with
SLS Pro/Mosquito BL Touch Mount For DDX
Mount a BL Touch bed levelling sensor onto the DDX.
Part made of PA12 (Nylon) with
Mount a BL Touch bed levelling sensor onto the DDX.
Part made of PA12 (Nylon) with
SLS Universal BL Touch Mount For DDX V3
Mount a BL Touch bed levelling sensor onto the DDX V3.
Part made of
Mount a BL Touch bed levelling sensor onto the DDX V3.
Part made of
DDX Adapter Set For Copperhead
To use with:
Bondtech DDX Direct Drive eXtruder for Creality
Bondtech DDX V2 Direct Drive eXtruder for
To use with:
Bondtech DDX Direct Drive eXtruder for Creality
Bondtech DDX V2 Direct Drive eXtruder for
Dragon 3007 Adapter for Mini After LGX Lite
Hotend mount to use with the Mini After LGX Lite set.
Compatible with Dragon hotend and
Hotend mount to use with the Mini After LGX Lite set.
Compatible with Dragon hotend and
Dragonfly 3007 Adapter for Mini After LGX Lite
Hotend mount to use with the Mini After LGX Lite set.
Compatible with Dragonfly hotend and
Hotend mount to use with the Mini After LGX Lite set.
Compatible with Dragonfly hotend and
Dragonfly 3010 Adapter for Mini After LGX Lite
Hotend mount to use with the Mini After LGX Lite set.
Compatible with Dragonfly hotend and
Hotend mount to use with the Mini After LGX Lite set.
Compatible with Dragonfly hotend and
Mosquito 3007 Adapter for Mini After LGX Lite
Hotend mount to use with the Mini After LGX Lite set.
Compatible with Mosquito hotend and
Hotend mount to use with the Mini After LGX Lite set.
Compatible with Mosquito hotend and
Mosquito 3010 Adapter for Mini After LGX Lite
Hotend mount to use with the Mini After LGX Lite set.
Compatible with Mosquito hotend and
Hotend mount to use with the Mini After LGX Lite set.
Compatible with Mosquito hotend and
V1.7 Rebuild kit for Wanhao D9
This rebuild Kit for Wanhao D9 Extruder will make it possible to use the latest
This rebuild Kit for Wanhao D9 Extruder will make it possible to use the latest
LGX Hardened Steel Drive Wheel
Spare part made of Hardened Steel to replace a Drive Wheel on a Bondtech LGX™
Spare part made of Hardened Steel to replace a Drive Wheel on a Bondtech LGX™
DDX Adapter Set For Mosquito
To use with:
Bondtech DDX Direct Drive eXtruder for Creality
Bondtech DDX V2 Direct Drive eXtruder for
To use with:
Bondtech DDX Direct Drive eXtruder for Creality
Bondtech DDX V2 Direct Drive eXtruder for
Bondtech Heat-break Kit for Prusa Mini
To solve the heat-creep
This Stainless Steel heat-break made by Bondtech for the Prusa Mini addresses
To solve the heat-creep
This Stainless Steel heat-break made by Bondtech for the Prusa Mini addresses
SLS 12mm EZABL Mount For DDX
Mount a 12mm EZABL bed levelling sensor onto the DDX.
Part made of PA12
Mount a 12mm EZABL bed levelling sensor onto the DDX.
Part made of PA12
SLS 18mm EZABL Mount For DDX
Mount a 18mm EZABL bed levelling sensor onto the DDX.
Part made of PA12
Mount a 18mm EZABL bed levelling sensor onto the DDX.
Part made of PA12
DDX v2 Rear Housing SLS
For owners of DDX v1 units only
Fit the Micro Swiss hotends in your
For owners of DDX v1 units only
Fit the Micro Swiss hotends in your
DDX Z-sensor Plate CR-10 v2 & v3
Spare part of the DDX Adapter sets for CR-10 v2 and v3
Made of PA12 (nylon);
Easy
Spare part of the DDX Adapter sets for CR-10 v2 and v3
Made of PA12 (nylon);
Easy
LGX Air-Cooled Cold Block
PA12 X-Carriage for Mini After LGX Lite
Spare X-carriage to use with the Mini After LGX Lite set.
Plastic part made of grey
Spare X-carriage to use with the Mini After LGX Lite set.
Plastic part made of grey
DDX Tube Mount for CR-10 v2 & v3
Spare part of the DDX Adapter sets for CR-10 v2 and v3
Made of
Spare part of the DDX Adapter sets for CR-10 v2 and v3
Made of
DDX Tube Mount for CR-10(S) Pro/Max
Spare part of the DDX Adapter sets for CR-10(S) Pro/Max
Made of PA12 (nylon);
Spare part of the DDX Adapter sets for CR-10(S) Pro/Max
Made of PA12 (nylon);
LGX Air-Cooled Heat Sink
Compatible with 4010 and 4020 axial fans.
It requires the alignment shaft and screw that are
Compatible with 4010 and 4020 axial fans.
It requires the alignment shaft and screw that are
DDX v3 Rear Housing PA12
Extended compatibility:
Fits the Micro Swiss hotends in your DDX.
Fits all previous models plus Ender-6
Extended compatibility:
Fits the Micro Swiss hotends in your DDX.
Fits all previous models plus Ender-6
LGX Air-Cooled Cold Block M
DDS Extension Cable 40cm
DDS Extension Cable
This extension cable will allow you to use our Direct Drive System for
DDS Extension Cable
This extension cable will allow you to use our Direct Drive System for
DDX Mount Plate CR-10 v2 & v3
Spare part of the DDX Adapter sets for CR-10 v2 and v3
Made of PA12 (nylon);
Easy
Spare part of the DDX Adapter sets for CR-10 v2 and v3
Made of PA12 (nylon);
Easy
DDX v3 Front Housing PA12
Simplifies The Setup Process
Fits all the DDX v3 fan Adapter sets;
Supports 40x40x10, 40x40x20, and
Simplifies The Setup Process
Fits all the DDX v3 fan Adapter sets;
Supports 40x40x10, 40x40x20, and
LGX Accessories For Sidewinder X1 and Copperhead
This LGX® set is supplied with:
1x LGX® PA12 Fan Shroud for Copperhead®;
1x LGX® PA12 Z-axis
This LGX® set is supplied with:
1x LGX® PA12 Fan Shroud for Copperhead®;
1x LGX® PA12 Z-axis
LGX Accessories For Sidewinder X1 and Mosquito
This LGX® set is supplied with:
1x LGX® PA12 Fan Shroud for Mosquito®;
1x LGX® PA12 Z-axis
This LGX® set is supplied with:
1x LGX® PA12 Fan Shroud for Mosquito®;
1x LGX® PA12 Z-axis
PA12 Cowling for Mini After LGX Lite
Spare Cowling to use with the Mini After LGX Lite set.
Plastic part made of grey
Spare Cowling to use with the Mini After LGX Lite set.
Plastic part made of grey
DDX v3 PA12 Fan Shroud for 5015 Fans
Made of PA12 (nylon);
Easier to install;
One screw fan mount;
Easier to adjust;
With front access adjustment screw;
Made of PA12 (nylon);
Easier to install;
One screw fan mount;
Easier to adjust;
With front access adjustment screw;
DDX v3 PA12 Fan Shroud for CR-10(S) Pro/Max
Made of PA12 (nylon);
Easier to install;
With snap-on fan mount;
Easier to adjust;
With front access adjustment screw;
Made of PA12 (nylon);
Easier to install;
With snap-on fan mount;
Easier to adjust;
With front access adjustment screw;
DDX v3 PA12 Fan Shroud for Ender/CR-10(S)
Made of PA12 (nylon);
Easier to install;
With snap-on fan mount;
Easier to adjust;
With front access adjustment screw;
Made of PA12 (nylon);
Easier to install;
With snap-on fan mount;
Easier to adjust;
With front access adjustment screw;
This Bondtech Extruder Body Rebuild Set is only for customers who previously bought a Bondtech MK2/MK2S or MK2.5/MK3 Upgrade Kit and have their Prusa i3 upgraded to MK2.5S or MK3S.
Arrow Hotend Upgrade Adapter Set
Mount a Slice hotend on your Creality
CR-6 SE, CR-6 Max or CR-10 Smart
Mount a Slice hotend on your Creality
CR-6 SE, CR-6 Max or CR-10 Smart
DDX Bed Rod Holder Set for Ender-5 Plus
Use the whole print surface of the Ender-5 Plus with this accessory.
Strong Plastic Parts made
Use the whole print surface of the Ender-5 Plus with this accessory.
Strong Plastic Parts made
Copperhead LGX Heat Break
Spare part made of Copper and Steel to use as replacement for the heat break
Spare part made of Copper and Steel to use as replacement for the heat break
Artikel 1 - 50 von 112