milling motor Mafell FM-1000 PV-WS / 1000 W / 4000 ... 25 000 1 / min - Tool-free quick-clamping device -
New Model with Portal integration - The speed can be either directly on the device or externally through a 0-10V signal.
With the tool-free quick clamping device you can use quickly and easily different router.
The milling motor has a dual-bearing spindle for better absorption of radial and axial forces during milling.
with the FM 1000 WS MAFELL has developed a further milling motor "made in Germany".
The high quality and thoughtful details make the MAFELL milling motor at the best partner for its performance class.
The speed can be infinitely to any application set.
In addition, the digital electronics with soft start, constant speed under load, idle speed reduction and overload protection features.
The MAFELL milling motors are under stringent quality control in Oberndorf a. N. prepared. Prior to delivery, each milling motor is "adjusted" under laboratory conditions. This increases the service life and the life
The FM 1000 WS offers highest concentricity of. & Lt; 0.10 mm at 25 mm spacing Responsible for this extraordinary precision is the delicate tuning of all components and the fact that anchor and stem are made of one piece and balanced.
New! -. Optimized fan geometry for significantly lower noise emissions
The engineers Mafell did a great job. They were able to optimize the air flow in the milling motor reduce noise from 76dB to 71dB.
So far, the unpleasant Lautsärke was with milling motors of this class one of the main arguments for a much more expensive high-frequency spindle to upgrade.
receive 1000 FM-WS With the Mafell a milling motor with a pleasant noise level at an unbeatable price
- Spindles competition = 78 - 82 dB (a)
- Mafell FM-1000 predecessor = 75.5 dB (a )
- Mafell FM-1000 and FM-1000 New model WS = 71 dB (A)
6 decibels reduced noise mean for the human auditory system in about half the volume
- model making, mold making, sign making, engraving, jewelry, electronics, stone carvings
- Ideal for portal milling machines, cutting tables, grinders and flexible shaft
- For wood, metal, plastics, foam, polystyrene, stone
nominal receiving 1,000 W
universal motor 230 V / 50 Hz
nominal idling speed from 4000 to 25000 1 / min
Portal attachment (holes) 6 x M6
dimensions L x W x H 280 x 92 x 85 mm
tool holder 8 mm
sound pressure level dB (A) 71
weight 2.8 kg
- milling motor Mafell FM-1000 PV-WS
- Power cord 4m
- operating instructions
Reducing (ground) 3 mm 207 944
Reducing (ground) 1/8 "(3.175 mm) 207 945
Reducing ( . ground) 4 mm 207 949
Reducing (ground) 6 mm 207 946
collet adapter includes a coupling nut 207 943
Control cable M8/4-pin, 5m (for FM 1000 PV / FM 1000 PV-WS) 208311
More information can be found on the manufacturer's website:http://fm.mafell.de/