M-DUINO PLC ARDUINO ETHERNET & GPRS 58 I/Os ANALOG/DIGITAL PLUS
Communications: RTC, µSD, Ethernet, USB, Full/Half duplex, RS485, RS232, I2C, Modbus
GPRS/SIM (SIM Card not included)
This is the first equipment based on the Arduino technology designed for a professional use.
This PLC has 17I/Os. It also contains several communication ports which provide more flexibility and control.
The GPRS Controllers family offers the possibility to expand up to 127 modules through I2C,
which means that you can have until 7100 Inputs / Outputs in Master-Slave connections, additionally to sensors, etc.
This PLC can be programmed using the Arduino IDE platform. See the Documentation menu below to download the software for free.
Instantaneous connection and coding
The GPRS Controller is programmed through the USB ports. This PLC can also be programed through Ethernet port remotely.
This offers and immediate access to program, mantain and control. Also you can continuously monitor the status for all the variables,
inputs, outputs, etc. It is compatible with the Ardbox , M-duino and the Touchberry Pi with an instantaneous connection.
Total Inputs: 35
Total Digital Optoisolated Inputs (7-24Vdc): 19
Digital Optoisolated Inputs (7-24Vdc): 14
Digital Optoisolated Inputs (7-24Vdc) | can work like interrupt Inputs INT (7-24Vdc): 5
10 bit Analog Inputs (0-10V) | Digital (5-24Vdc) Inputs configurable by software: 16
* From the (Xx) Digital, (Yx) can be configured as Analog (Xx = Total Digital In, Yx = Number of Analog In)
* From the (Xx) Digital, (Zx) can be configured as Interrupt (Xx = Total Digital In, Zx = Number of Interrupt pins)
Total Outputs: 22
Digital Optoisolated Outputs (5-24Vdc): 14
Digital Optoisolated and PWM (5-24Vdc) | 8 bit Analog (0-10V) Outputs configurable by switch: 8
Relay Outputs (220Vac - 5A): 0
Ethernet communication - 1
Wi-Fi & BLE (Bluetooth Low Energy) - NO
GPRS/GSM - YES
USB port (type B) communication (for uploading or debugging only) - 1
Micro USB port (type B) communication (for uploading or debugging only) - 0
I2C communication (interface with other Industrial Shields, sensors, I/Os modules) - 1
Serial TTL (UART) communication - 1
RS-232 communication - 1
Half/Full Duplex RS-485 communication - 1
SPI external port communication (using MOSI, MISO, SS pins of Arduino) - 1
RTC (Real Time Clock. NOTE: I2C port used. See pinout modification) - YES
µSD Socket (using SPI port, chip select D53 pin) - YES
* When using I2C, 2 inputs are lost
The Open Source Board CPU
Single Board Computer (SBC) Microcontroller: Arduino Mega Original Board (ATmega 2560)
Flash Memory (KB): 256
Flash Memory of which used by bootloader (KB): 8
SRAM (KB): 8
EEPROM (KB): 4
Clock Speed (MHz): 16
Conformity with Health, Safety, and Environmental Protection (CE):
EN61010-1 | EN61010-2-201 | EN61131-2:2007(Clause 8: Zone A/B EMC and clause 11:LVD) |
EN61000-6-4:2007 + A1 2011 (Emissions) | EN 61000-6-2:2005 (Immunity)
Medical Devices Directive (CE): 93/42/EEC
FCC Federal Code of Regulation (CFR) for Electronic Equipment: EMC: FCC Part 15
RoHS: Directive 2002/95/EC | Restriction of Hazardous Substances (EEE)
UL: STD 61010-2-201 and UL STD 61010-1 | expecting final auditory (tested)
NCAGE (Commercial and Government Entity Code - Department of Defense):
NCAGE 99SGB |Commercial and Government Entity Code | Boot&Work Corp SL Industrial Shields
PLC measures: 101x119.5x119.3
DIN Rail mounting
Max. consum.: 1.2A
Power Supply Voltage (Vdc) Range: 12-24
Power Consumption (VAC max.): 30
Operating Temperture C: 0C-60C
Operating Temperature F: 32F-140F
Operating Relative Humidity % (no condensation): 10%-90%
Package Size: 13cm x 14cm x 8cm
ECCN Number: EAR99H
HTS Code: 85184.108.40.206
740.17 Language - 740.17 (b)(1) for self-classification or (b)(3) CCATS issued: §740.17 (b)(1)
Country of Origin: Spain
STATIC Sensitive: NO
Moisture Sensitivity Level (MSL): MSL 1 - Unlimited
RoHS Compliant by Exemption? NO
Does Part Contain Lithium? YES
Product Weight: 867 gram max.
Other Technical Specifications:
* Rx,Tx pins are not available using RS485.
For SPI you need to choose another pin for Select Function
(You can choose, SDA, SCL, Rx, Tx, Pins of Arduino)
How to start
1. Download the open-source software "Arduino IDE" version 1.8.0 or higher and open it.
2. Click on "File" and then on "Preferences".
3. See the "Additional Boards Manager URLs":
text box inside the "Settings" tab and add this URL:
4. Close the preferences window with the "Ok" button.
5. Click on "Tools" menu , and open the "Boards" submenu, and click the "Boards Manager" option, to open the Boards Manager window.
6. Search "industrialshields" to the search filter and select to the list and click "Install" or "Update" if you have not got the latest version.
7. Close the "Boards Manager". Now you can select each of our PLCs by clicking on "Tools", then "Board",
then "Industrial Shields Boards" and select your family of PLCs.
Contact firstname.lastname@example.org if you have any questions.