PHPoC Black (P4S-341) is a programmable microcontroller board with a PHPoC interpreter. It supports various interfaces for connection to sensors and devices. With PHPoC Black lets you monitor and control your device from a remote location via the web browser. Moreover, it is designed so that it can be stacked to implement additional functions with PHPoC expansion cards
Description:.
- PHPoC (PHP on Chip) - interpreter embedded
- uploading and debugging code via USB
- 10Base-T / 100Base-TX Ethernet (RJ45)
- 8 x digital input / output
- 14 x common interface (digital input / output, SPI, I2C, UART)
- 6 x analog input
- HTTP / SSH / WebSocket server
- Web page customization available (accessible with smart devices)
Advanced:
processor
Core Cortex-M4 168 MHz
Flash system 512 KBytes, user 512 KBytes
SRAM 192 KBytes
power
input voltage 5V ± 10%
input port DC jack or USB device port
Max Current DC socket: 1.5A, USB device connection: 500mA
network interface
Ethernet 10Base-T / 100Base-TX Ethernet
USB interface
USB host USB host interface setting e for expansion card
USB Device PC interface for programming
DIO
Type 3.3V CMOS level digital I / O
connections maximum 20 connections
mode input / output, push-pull / open-drain, pull-up / pull-down
communication
UART 2 ports (RXD, RXD, RTS, CTS) with hardware flow control
SPI 1 port
I2C 1 port (100 kbps or 400 kbps)
ADC
12-bit resolution
channels 6
hardware timer / counter
mode PWM output, to switch output / pulse output, Capture
unit mili-seconds or micro-seconds
channels 4
RTC
battery 40mAh lithium coin
peripherals Realtim Clock, 4KB backup SRAM
LED
system LED power, status, 3.3 V, PWR5
user LED uio0.30, uio0.31
power
3.3V maximum current 1A
PWR5 + 3.3V maximum current 1.5A
dimensions
dimensions 63.8 mm x 66.5 mm x 13 mm
weight 29.8 g
introduction video
