Pixel Sim Rig 1.2 - kit
Parts list according to Thomas Stuchlik / Pixelconnect
Scope of delivery:
2x aluminum profile 40x120L I-type slot 8 (light), black anodized - standard length (EUR 49.00/m) 600mm (ArtNr.62743-STLS-0600)
1x aluminum profile 40x160L I-Type Nut 8 (light), black anodized - 400mm cut including processing for steering wheel mount Pixel Rig 1.2 (ArtNr.62750-STLS-0400-BE-Pixel_1. 2)
2x aluminum profile black 40x40L I-type groove 8 (light) / length: 420mm (ArtNr.62729-STLS-0420)
2x aluminum profile black 40x40L I-type groove 8 (light) / length: 580mm (ArtNr .62729-STLS-0580)
7x aluminum profile black 40x40L I-type groove 8 (light) - standard lengths (18.90EUR/m) 500mm (ArtNr.62729-STLS-0500)
2x aluminum profile black 40x80L I-type Slot 8 (light) - standard length (EUR 35.00/m) 1000mm (ArtNr.62736-STLS-1000)
5x DIN 125 form A washer, steel, galvanized d=6.4mm / D=12mm (ArtNr.DIN125 -A6,4)
4x DIN 7380 truss-head screw with hexagon socket, 10.9, galvanized M6x16 (ArtNr.DIN7380-6x16)
64x DIN 7380 truss-head screw with hexagon socket, 10.9, galvanized M8x16 (ArtNr.DIN7380-8x16)
8x DIN 9021 washer large, steel, galvanized d=8.4mm / D=24mm (ArtNr.DIN9021-8.4)
5x DIN 912 cylinder screw with hexagon socket, 8.8, galvanized M6x50 (ArtNr.DIN912-6x50)
2x DIN 912 cylinder head screw with hexagon socket, 8.8, zinc-plated M6x60 (ArtNr.DIN912-6x60)
6x inner angle 90° die-cast zinc 40 I-Type Nut 8 (ArtNr.60534)
4x sliding block with bar I-Type Nut 8, Thread diameter M6 (ArtNr.60060-1)
56x sliding block with bridge I-type groove 8, thread diameter M8 (ArtNr.60077-1)
4x slot foot, 40 I-type groove 8 (ArtNr.098T040KGN08)
2x profile cover cap 40x120 I-type slot 8 (Item no. 60589)
12x profile cover cap 40x40 I-type slot 8 (Item no. 60008-1)
8x profile cover cap 40x80 I-type slot 8 (Item no. 60572)
4x connector plate I-type slot 8, 40x80x80mm, steel 5mm galvanized (item no. 90890)
24x angle 40 I-type slot 8 black powder coated (item no. 60114-BK)
2x sticker "Pixel Connect"
Only the parts that are listed in the scope of delivery will be delivered.
Additional required parts such as steering wheel and pedals are not included.
The Sim Rig is delivered WITHOUT seat, steering wheel and pedals.
Notes on assembly:
- If necessary, additional holes are required in the aluminum profiles to attach the pedals, the steering wheel and the seat .
- If necessary, additional screws and nuts are required
- There are small bars on the angles that can be broken out. This is necessary if the bracket is to sit across the aluminum profile.
- There is no claim to the completeness of the parts. There is also no guarantee that it will function correctly.
FAQ:
Q:
What are the dimensions the assembled sim rig?
A:
The dimensions are (L x W x H): 130 x 58 x 70 cm (without seat, without monitor mount)
With monitor mount is the Height 110 cm.
